Download Zebra Wireless Print Server User guide

SGD Commands for Wireless Operation
wlan.security
This table identifies the commands for this format:
Commands
Details
getvar
This command instructs the printer to return the name and not the type. If
an invalid security mode is entered the printer returns Invalid Mode.
Format: ! U1 getvar "wlan.security" "value"
setvar
This command instructs the printer to set the wireless security value.
Format: ! U1 setvar "wlan.security" "value"
Values:
"1" = No wireless security or "none"
"2" = WEP 40-bit or "wep 40-bit"
"3" = WEP 128-bit or "wep 128-bit"
"4" = EAP-TLS or "eap-tls"
"5" = EAP-TTLS or "eap-ttls"
"6" = EAP-FAST or "eap-fast"
"7" = PEAP or "peap"
"8" = LEAP or "leap"
"9" = WPA PSK or "wpa psk" (Key rotation for WPA2 PSK is
supported in firmware versions V53.15.8Z , X60.15.8Z, and
later.)
"10" = WPA EAP-TLS or "wpa eap-tls"
"11" = WPA EAP-TTLS or "wpa eap-ttls"
"12" = WPA EAP-FAST or "wpa eap-fast"
"13" = WPA PEAP or "wpa peap"
"14" = WPA LEAP or "wpa leap"
"15" = Kerberos or "kerberos"
Default: "1"
Example • This setvar example shows the value set to "1".
! U1 setvar "wlan.security" "1"
When the setvar value is set to "1", the getvar result is "none".
4/29/08
Wireless User Guide
14143L-005 Rev. A
193