Download Comtech EF Data Vipersat SLM-5650A User guide
Transcript
VMS Network Configuration Figure 3-55 Enable Dynamic Function for SOTM Remote 3. Check the Dynamic box and select the browse button beneath it. This will open a dialog box in which the subnet should appear (figure 3-56). Note that, if the subnet icon was not copied into the Network Manager site as described in Network Manager Configuration, this box will be empty. Figure 3-56 Selecting ROSS Unit for SOTM 4. Select the Subnet and click OK. This will open up a dialog showing the subnet components. 5. Select the ROSS unit and click OK. 3-46 V M S U s e r G u id e