Download Quantum FastStor 2 User guide
Transcript
Description LTO-1 Loading time to BOT (for previously written tape) < 25 seconds Unloading time from BOT < 13 seconds MTBF 250,000 hours Interface type LVD/SE Ultra-2 wide SCSI-2 Table 8-7 provides the requirements necessary to operate a FastStor 2 configured with an Super DLTtape 1 tape drive. Table 8-7 Super DLTtape 1 Drive Specifications Description Super DLTtape 1 Read/write transfer rate: maximum sustained Non-compressed mode:16 MB/second Compressed (2:1 typical): 32 MB/second Burst transfer rate 80 MB/sec. Average access time 70 seconds Temperature shock immunity–maximum rate of change 10º to 40º C (50º to 104º F) – 11º C per hour (51.8º F) Loading time to BOT (for previously written tape) 12 seconds Unloading time from BOT 12 seconds MTBF 250,000 hours Interface type LVD/SE Ultra-2 SCSI Table 8-8 provides the requirements necessary to operate a FastStor 2 configured with an LTO-2 tape drive. Table 8-8 LTO-2 Drive Specifications Description LTO-2 Read/write transfer rate: maximum sustained Non-compressed mode:30 MB/second Compressed (2:1 typical): 60 MB/second Burst transfer rate 160 MB/second Average access time 52 seconds Temperature shock immunity–maximum rate of change 10º to 40º C (50º to 104º F) – 10º C per hour (50º F) 62 6-00515-03 Rev A