Download Siemens SIMATIC NET Operating instructions
Transcript
Guidelines for Installing Networked Automation Systems in Buildings 5. Fit the connector – Fit the lower cable clamp into the grooves of the connector casing. – Fit the cable into the connector casing so that the braided shield with the copper band lies in the cable clamp – Fit the upper cable clamp into the grooves of the connector casing and screw it tight – Assign pairs of wires to the screw terminals You will find the assignment necessary for a particular cable type in Section LEERER MERKER “Preassembled Industrial Twisted Pair Cables”. – Secure the conductors in the screw terminals – Screw the cover on to the connector casing 5 12 3 10 Shield foil Figure 7-10 7-34 ÓÓÓÓ ÓÓÓÓ ÓÓÓÓ ÓÓÓÓ Braided shield wrapped with copper band 15-Pin Sub-D Male Connector Fitted to the Standard Cable SIMATIC NET Twisted-Pair and Fiber-Optic Networks C79000-G8976-C125-02