Download Wolf ICBIM15 Specifications

WOK installation manual:Intl Multi-F CT Install
6/6/11
1:49 PM
Page 12
W O L F M U LT I - F U N C T I O N C O O K TO P
C O O K TO P R E M O VA L
C O N TA C T
I N F O R M AT I O N
Imported and
distributed by:
Multyflex
Website:
www.multyflex.com.au
If it is necessary to remove the multifunction cooktop for service, shut off the
gas supply. Disconnect the gas and
electric supply. Remove the mounting
brackets on the right and left side of the
burner box and remove the cooktop.
Reinstall in the reverse order and check
the gas connection for leaks.
TROUBLE SHOOTING
IMPORTANT NOTE: If the multi-function
cooktop does not operate properly,
follow these troubleshooting steps:
Verify that power is being supplied to
the cooktop.
Check the gas supply and electrical
connections to ensure that the installation has been completed correctly.
Refer to the Troubleshooting Guide in
the Wolf Multi-Function Cooktop Use
& Care Information.
If the cooktop still does not work,
contact your Wolf dealer or regional
distributor. Do not attempt to repair
the cooktop yourself.
12
IF YOU NEED SERVICE
For service in your area, contact
either your Wolf dealer or call
1300 808 859.
When calling for service, you will
need the model and serial number of
your multi-function cooktop. Both
numbers are listed on the rating
plate, located on the underside of the
cooktop. A copy of the data plate is
reproduced below.
IMPORTANT NOTE:
Installation and service must be
performed by a qualified installer or
service agency.
Do not modify this appliance.