Download Daewoo DS-360 Specifications
Transcript
2-10 Basics Parameter LEDs These LEDs indicate which parameter is currently displayed in the parameter display. Parameter LEDs Display LED FREQ AMPL OFFSET STARTF STOPF REL TONE1 TONE2 DEPTH COUNT TRIGR RATE Parameter Output Frequency Output Amplitude Output Offset Start Frequency for Sweeps Center Frequency for Bandwidth Limited Noise Stop Frequency for Sweeps Cutoff Frequency for Bandwidth Limited Noise Indicates that the amplitude display is in REL mode. Does not indicate a specific display. Indicates that Amplitude and Frequency Displays refer to TONE 1. Does not indicate a specific display. Indicates that Amplitude and Frequency Displays refer to TONE 2. Does not indicate a specific display. Off Level Depth for Bursts Burst Count for Bursts Trigger Source for Sweeps and Bursts Burst Rate for Bursts DS360 Ultra Low Distortion Function Generator