Download Draper SL6 User guide

DETAIL ENTRY METHOD SELECTION
SPOT supports two Detail entry methods, touch screen and keyboard.
The method selected follows the user PIN entry and is defined by
configuration option during user setup. For example, one user can be set
for keyboard detailing, while all other users are set for touch screen
detailing. The touch screen Detail method is the recommended entry
method since it has expanded functionality and is easier to learn and
use. The following are important considerations:
Keyboard
Commonly used by those familiar with the SPOT Classic detailing
method. This method commonly uses numeric sequences entered from
the numeric pad for detailing, (i.e., 1-3-2 could mean [1]Dryclean,
[3]Pants, [2]Jeans). While this method is fast once learned, it does have
a fairly long learning curve. Detailing allows only two user-defined
descriptors plus a single upcharge table list.
Touch screen
This more robust detailing method is more intuitive, requiring less time
to learn. It is also very fast to use. The drawback is that it requires the
use of a more expensive touch screen to obtain the maximum operational
benefit. A cheaper mouse can be used, but is slower and not recommended if fast detailing is required. It also contains four user-defined
descriptors and an upcharge table list with upcharge sub-list capability.
70
A/R–Accounts Receivable CC–Credit Card CCOF–Credit Card On File CV–Customer View