Download Sharp R-990KW Operating instructions

OVEN AND ACCESSORIES
ACCESSORIES
Check to make sure the following accessories
are supplied:
14 Turntable
15 Turntable support
16 Low Rack (hight: 4 cm)
17 High Rack (hight: 15,5 cm)
18 Square shelf
19 Square Tin
20 Shelf locator.
• Place the turntable support into the coupling in the
centre of the oven floor, ensuring you place it TOP
side up, (TOP is engraved on one side). It should
be able to freely rotate around the coupling.
• Place the turntable on to the turntable support.
• Place the high/low racks onto the turntable if
necessary. These racks are used for cooking in
Convection, Simul or Grill mode.
• Use the square shelf and square tin for convection
only. See page 15. When using the square shelf
or square tin, place them onto the shelf runners
as shown in Fig. A. When using the square shelf,
ensure the shelf locator is on the right side.
14
15
8
16
17
18
19
NOTES:
• Always operate the oven with the turntable and
support fitted correctly. This promotes thorough
even cooking. A badly fitted turntable may rattle,
may not rotate properly and damage the oven.
• The turntable rotates clockwise or counter
clockwise. The rotary direction may change each
time you start the oven. This does not affect cooking
performance.
• When you order accessories, please mention two
details: part name and model name to your dealer
or SHARP authorised service facility.
A
18
20
6
R-960N_01-47.indd 6
5/23/08 6:42:57 PM