Download ZyXEL Communications Prestige 480 User`s guide

U-90E Data/Fax Modem
Command Options Function & Description
*Pn
Ref.
*M0 *
Leased line auto-handshake on originate
mode.
*M1
Leased line auto-handshake on answer
mode.
n=0-31
*P11 *
Set leased line transmission power level; S17.1-4
ranges from 0 dBm to –31dBm (default: 11 dBm depends on the country code)
(see also S35.3)
*Qn
Action taken when line quality changes. S27.6-7
*Q0
No action to poor signal quality.
*Q1
Retrain action taken if signal quality is
poor. (See also S41.2)
*Q2 *
Adaptive rate, automatic fall-back or
forward.
*Q3
Disconnect if signal quality is poor.
*T
Recall the last CND (Caller ID)
information.
*V
View password table.
S40.2
Note:
•
*V command requires the supervisor password before execution.
*Wab
Writes the local configuration profile a to S36.1
remote user profile b and resets the
remote modem from that profile:
a= 0-3, local user profile number
4, local active configuration
5, local factory default settings
b= 0-3 remote user profile number.
Note:
•
The above command only works when the modem is on-line independent of
the type of connection involved.
*$
AT Command Set Summary
Extended *AT Command summary help.
5-15