Download Biostar TA785G3 PLUS - BIOS User`s manual
Transcript
TA785G3/TA780G3/TA760G3 BIOS Manual BIOS Setup .................................................................................................1 1 Main Menu...............................................................................................3 2 Advanced Menu.......................................................................................7 3 PCIPnP Menu........................................................................................16 4 Boot Menu..............................................................................................19 5 Chipset Menu.........................................................................................21 6 T-S eries Menu........................................................................................29 7 Exit Menu...............................................................................................43 i TA785G3/TA780G3/TA760G3 BIOS Manual BIOS Setup Introduction T he purpose of this manual is to describe the settings in the AMI BIOS Setup program on this motherboard. The Setup program allows users to modify the basic system configuration and save these settings to CMOS RAM. T he power of CMOS RAM is supplied by a battery so that it retains the Setup information when the power is turned off. Basic Input-Output System (BIOS) determines what a computer can do without accessing programs from a disk. T his system controls most of the input and output devices such as keyboard, mouse, serial ports and disk drives. BIOS activates at the first stag e o f the booting process, loading and executing the operating system. Some additional features, such as virus and password prot ection or chipset fine-tuning options are also included in BIOS. T he rest of this manual will to guide you through the options and settings in BIOS Setup. Plug and Pla y Support T his AMI BIOS supports the Plug and Play Version 1.0A specification. EPA Green PC Support T his AMI BIOS supports Version 1.03 of the EPA Green PC specification. APM Support T his AMI BIOS supports Version 1.1&1.2 of the Advanced Power Man agement (APM) speci fication. Power management features are implemented via the System Management Int errupt (SMI). Sleep and Suspend power man agement modes are supported. Power to the hard disk drives and video monitors can also be managed by this AMI BIOS. ACPI Support AMI ACPI BIOS support Version 1.0/2.0 of Advanced Configuration and Power interface specifi cation (ACPI). It provides ASL code for pow er manag ement and device con figuration capabilities as defined in the ACPI specification, developed by Microso ft, Intel and T oshiba. 1 TA785G3/TA780G3/TA760G3 BIOS Manual PCI Bus Support T his AMI BIOS also supports Version 2.3 of the Intel PCI (Peripheral Component Interconn ect) local bus speci fication. DRAM S upport DDR2 SDRAM (Double Data Rate II Synchronous DRAM) is supported. Supported CP Us T his AMI BIOS supports the AMD CPU. Using Setup When starting up the computer, press <Del> during the Power-On Self-Test (POST) to enter the BIOS setup utility. In the BIOS setup utility, you will see General Help description at the top right corner, and this is providing a brief description of the selected item. Navigation Keys for that particular menu are at the bottom right corner, and you can use these keys to select item and ch ange the settings. General Help Navigation Keys Notice z z z T he default BIOS settings apply for most conditions to ensure optimum performan ce of the motherboard. If the system becomes unstable after changing any settings, please load the default settings to ensure system’s compatibility and stability. Use Load Setup Default under the Exit Menu. For better system perform ance, the BIOS firmware is being continuously updated. T he BIOS information described in this manual is for your reference only. T he actual BIOS information and settings on board may be slightly different from this manual. T he content of this manual is subject to be chang ed without notice. We will not be responsible for any mistakes found in this user’s manual and any system damage that may be caused by wrong-settings. 2 TA785G3/TA780G3/TA760G3 BIOS Manual 1 Main Menu Once you enter AMI BIOS Setup Utility, the Main Menu will appear on the screen providing an overview of the basic system inform ation. Main Advanced PCIPnP BIOS S ETUP UTILITY Boot Chips et Syste m Overview T-Series Exit Use [ENTER], [TA B] or [ SHIFT-TAB] t o sele ct a field. AMI B IOS Versi on :01.01.0 1 Build Date:01/01/0 9 Use [+] or [-] t o conf igure system Time. Syste m Memory Size : Syste m Time Syste m Date [00:00:00] [Thu 01/01/2009] Flopp y A +Ta b F1 F1 0 ES C > IDE Configuratio n S elect Screen S elect Item C hange Field S elect Field G eneral Help S ave and Exit E xit vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc. AMI BIOS Shows system information, including BIOS version and built date. System Memory Shows system memory size. System Time Set the system internal clock. System Date Set the system date. Note that the ‘Day’ automatically changes when you set the date. 3 TA785G3/TA780G3/TA760G3 BIOS Manual Floppy A Select the type of floppy disk drive installed in your system. Options: 360K, 5.25 in / 1.2M, 5.25 in / 720K, 3.5 in / 1.44M, 3.5 in / 2.88M, 3.5 in / None IDE Configuration T he BIOS will automatically detect the presence of ID E/SAT A devices. There is a sub-menu fo r each IDE/SAT A device. Select a device and press <Enter> to enter the sub-menu of detailed options. BIOS S ETUP UTILITY Main IDE C onfuguration > > > > > > Whil e entering s etup, BIOS auto detect s the pres ence of IDE devi ces. This di splays the status of au to dete ction of IDE devi ces. Pri mary IDE Mast er Pri mary IDE Slav e SAT A 1 Device SAT A 2 Device SAT A 3 Device SAT A 4 Device Hard Disk Write Pr otect IDE D etect Time Ou t (Sec) [ Disabled] [ 35] S elect Screen S elect Item En terG o to Sub Scr een F1 G eneral Help F1 0 S ave and Exit ES C E xit vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc. 4 TA785G3/TA780G3/TA760G3 BIOS Manual Primary IDE Master/Slav e ; SATA 1/2/3/4 Device BIOS SETUP UTILITY Main Select the type of device connected to the system. Primary IDE Master Device : Type [Auto] LBA/Large Mode [Auto] Block (Multi-Sector Transfer)[Auto] PIO Mode [Auto] DMA Mode [Auto] S.M.A.R.T [Auto] 32Bit Data Transfer [Enabled] +F1 F10 ESC Select Screen Select Item Change Option General Help Save and Exit Exit vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc. T he BIOS detects the information and values of resp ective devices, and these information and values are shown below to the name of the sub-menu. Type Select the type of the IDE/SAT A drive. Options: Auto (Default) / CDROM / ARMD / Not Installed LBA/Large Mode Enable or disable the LBA mode. Options: Auto (Default) / Disabled Block (Multi-Sector Transfer) Enable or disable multi-sector trans fer. Options: Auto (Default) / Disabled PIO Mode Select the PIO mode. Options: Auto (Default) / 0 / 1 / 2 / 3 / 4 DMA Mode Select the DMA mode. Options: Auto (Default) / SWDMA0 ~ 2 / MWDMA0 ~ 2 / UDMA0 ~ 5 S.M.A.R.T Set the Smart Monitoring, Analysis, and Reporting T echnology. Options: Auto (Default) / Disabled / Enabled 5 TA785G3/TA780G3/TA760G3 BIOS Manual 32Bit Data Transfer Enable or disable 32-bit data transfer. Options: Enabled (Default) / Disabled Hard Disk Write Protect Disable or enable device write protection. T his will be effective only if the device is accessed through BIOS. Options: Disabled (Default) / Enabled IDE Detect Time Out (Sec) Select the time out value for detecting IDE/SAT A devices. Options: 35 (Default) / 30 / 25 / 20 / 15 / 10 / 5 / 0 6 TA785G3/TA780G3/TA760G3 BIOS Manual 2 Advanced Menu T he Advanced Menu allows you to configu re the settings of CPU, Super I/O, Power Management, and other system devices. Notice z Beware of that setting inappropriate values in items of this menu may cause system to malfunction. Main Advan ced PCIPnP BIOS SETU P U TILITY Boot Chipset Advanced Setti ngs T-Series Exit Options for CPU WARNING: Setti ng wrong values in below sections may c ause system to malf unction. > > > > > > CPU Configur ation SuperIO Conf iguration Smart Fan Co nfiguration Hardware Hea lth Configuration Power Config uration USB Configur ation S elect Screen S elect Item EnterG o to Sub Screen F1 G eneral Help F10 S ave and Exit ESC E xit vxx .xx (C)Copyright 1985-200x, American Me gatrends, Inc. CPU Configuration T his item shows the CPU information that the BIOS automatically detects. BIOS S ETUP UTILITY Advanced CPU C onfiguration Modul e Version: AGESA Version: Physi cal Count: Logic al Count: Enab le/Disable Secu re Virtual M achine Mode (SVM) AMD C PU Revis ion: Cache L1: Cache L2: Cache L3: Speed : NB Clk: ncHT Speed : Width I/O : Able to Change Fre q : uCode Patch Level : Secur e Virtual Mac hine Mode [ Enabled] Cool N Quiet [ Enabled] ACPI SRAT Table [ Enabled] +F1 F1 0 ES C S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc. 7 TA785G3/TA780G3/TA760G3 BIOS Manual Secure Virtual Machine Mode Virtualization T echnology can virtually separate your system resou rce into several parts, thus enhance the performance when running virtual machines or multi interface systems. Options: Enabled (Default) / Disabled Cool N Quiet T his item allows you to enable or disable the Cool & Quiet power saving technology. Options: Enabled (Default) / Disabled ACPI SRAT Table T he operating system scans the ACPI SRAT at boot time and uses the information to better allocate memory and schedule software threads for maximum perform ance. T his item controls whether the SRAT is made available to the operating system at boot up, or not. Options: Enabled (Default) / Disabled Probe Filter T his item allows you to control the initialization mode for Probe Filter. Options: Auto (Default) / Disabled / MP Mode C1E Support T his item allows you to configure the Enhan ced H alt State (C1E) fun ction, which may reduce the power consumption of your system when the system is idle. Options: Disabled (Default) / Enabled 8 TA785G3/TA780G3/TA760G3 BIOS Manual SuperIO Configuration BIOS S ETUP UTILITY Advanced Confi gure ITE8718 Super IO Chi pset Onboa rd Floppy Con troller Seria l Port1 Addre ss Keybo ard PowerOn Mouse PowerOn Resto re on AC Powe r Loss [ Enabled] [ 3F8/IRQ4] [ Disabled] [ Disabled] [ Power Off] Allo ws BIOS to E nable or D isable Flopp y Cont roller S elect Screen S elect Item C hange Option +F1 G eneral Help F1 0 S ave and Exit ES C E xit vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc. Onboard Floppy Controller Select enabled if your system has a floppy disk controller (FDC) installed on the system board and you wish to use it. If you installed another FDC or the system uses no floppy drive, select disabled in this field. Options: Enabled (Default) / Disabled Serial Port1 Address Select an address and corresponding interrupt fo r the first and second seri al ports. Options: 3F8/IRQ4 (Default) / 2F8/IRQ3 / 3E8/IRQ4 / 2E8/IRQ3 / Disabled Keyboard Pow erOn T his item allows you to control the keyboard power on function. Options: Disabled (Default) / Specific Key / Stroke Key / Any Key Specific Key Enter T his item will show only when Keyboard PowerOn is set “Specific Key.” Stroke Keys Selected T his item will show only when Keyboard PowerOn is set “Stroke Key.” Options: Ctrl+F1 (Default) / Wake Key / Power Key / Ctrl+F2 / Ctrl+F3 / Ctrl +F4 / Ctrl+F5 / Ctrl+F6 9 TA785G3/TA780G3/TA760G3 BIOS Manual Mouse PowerOn T his item allows you to control the mouse power on function. Options: Disabled (Default) / Enabled Restore on AC Power Loss T his setting specifies how your system should behave after a power fail or interrupts occurs. By choosing Disabled will leave the computer in the power off state. Choosing Enabled will restore the system to the status before power failure or interrupt occurs. Options: Power O ff (Default) / Power ON / Last State Smart Fan Configuration BIOS SETU P U TILITY Advan ced Smart Fan Conf iguration CPU Smart Fan Smart Fan Cali bration Control Mode Fan Ctrl OFF(o C) Fan Ctrl On(oC ) Fan Ctrl Start value Fan Ctrl Sensi tive [Dis abled] When you choice [Auto] ,[3Pin] or [4Pin], please run the calibration to define the Fan parameters for Smart Fan control +F1 F10 ESC S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit vxx .xx (C)Copyright 1985-200x, American Me gatrends, Inc. CPU Smart Fan T his item allows you to control the CPU Smart Fan function. Options: Disabled (Default) / Auto / 4Pin / 3Pin Smart Fan Calibration Choose this item and then the BIOS will auto test and detect the CPU/System fan fun ctions and show CPU/System fan speed. 10 TA785G3/TA780G3/TA760G3 BIOS Manual Control Mode T his item provides several operation modes of the fan. Options: Quiet / Performan ce / Manual Fan Ctrl OFF(℃ ) If the CPU/System T emperature is lower than the set value, FAN will turn off. Options: 0~127 (℃) (With the interval of 1℃) Fan Ctrl On(℃ ) CPU/System fan starts to work under smart fan function when arrive this set value. Options: 0~127 (℃) (With the interval of 1℃) Fan Ctrl Start Value When CPU/System temperature arriv es to the set value, the CPU/System fan will work under Smart Fan Function mode. Options: 0~127 (With the interval of 1) Fan Ctrl Sensitive Increasing the value will raise the speed of CPU/System fan. Options: 1~127 (With the interval of 1) Hardware Health Configuration T his item shows the system temperature, fan speed, and voltage information. BIOS S ETUP UTILITY Advanced Hardw are Health Co nfiguration H/W H ealth Functio n Shutd own Temperatu re [ Enabled] [ Disabled] Enab les Hardware Heal th Monitorin g Devi ce. CPU Temperat ure SYS T emperature CPU F an Syste m1 Fan Syste m2 Fan S elect Screen S elect Item C hange Option +F1 G eneral Help F1 0 S ave and Exit ES C E xit CPU V oltage Chip Voltage +3.30 V +5.00 V +12.0 V DDR V oltage HT Vo ltage vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc. 11 TA785G3/TA780G3/TA760G3 BIOS Manual H/W Health Function If with a monitoring system, the system will show PC health status during POST stage. Options: Enabled (Default) / Disabled Shutdow n Temperature T his item allows you to set up the CPU shutdown T emperature. This item is only effective under Windows 98 ACPI mode. Options: Disabled (Default) / 60℃ /140℉ / 65℃/149℉ / 70℃/158℉ / 75℃/167℉ / 80℃/176℉ / 85℃/185℉ / 90℃/194℉ Power Configuration BIOS S ETUP UTILITY Advanced ACPI Settings Suspe nd mode ACPI Version Featu res ACPI APIC support AMI O EMB table Headl ess mode [ S1 (POS)] [ ACPI v1.0] [ Enabled] [ Enabled] [ Disabled] RTC R esume [ Disabled] RTC A larm Date(Day s) RTC A larm T ime USB W akeup From S3 /S4 [ Disabled] Power On by PCIE/O nboard LAN [ Disabled] Wake Up by PCI [ Disabled] Wakeu p on Ring [ Disabled] Sele ct the ACPI stat e used for Syst em Suspend. +F1 F1 0 ES C S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc. Suspend mode T he item allows you to select the suspend type under the ACPI operating system. Options: S1 (POS) (Default) Power on Suspend S3 (ST R) Suspend to RAM S1 & S3 POS+STR ACPI Version Features T he item allows you to select the version of ACPI. Options: ACPI v1.0 (Default) / ACPI v2.0 12 TA785G3/TA780G3/TA760G3 BIOS Manual ACPI APIC support T his item is used to enable or disable the motherboard's APIC (Advan ced Programmable Interrupt Controller). The APIC provides multiprocessor support, more IRQs and faster interrupt handling. Options: Enabled (Default) / Disabled AMI OEMB table Set this value to allow the ACPI BIOS to add a pointer to an OEMB table in the Root System Description T able (RSDT ) table. Options: Enabled (Default) / Disabled Headless mode T his is a server-speci fic feature. A headless server is one that operates without a keyboard, monitor or mouse. To run in headless mode, both BIOS and operating system (e.g. Windows Server 2003) must support headless operation. Options: Disabled (Default) / Enabled RTC Resume When “ Enabled”, you can set the date and time at which the RT C (real-time clock) alarm awak ens the system from Suspend mode. Options: Disabled (Default) / Enabled RTC Alarm Date (Days) You can choose which date the system will boot up. RTC Alarm Time You can choose the system boot up time, input hour, minute and second to specify. USB Wakeup from S3/S4 T his item allows you to enable or disabled the USB resume from S3/S4 function. Options: Disabled (Default) / Enabled Power On by PCIE/Onboard LAN T his item allows you control the wake on LAN (WOL) function. Options: Disabled (Default) / Enabled 13 TA785G3/TA780G3/TA760G3 BIOS Manual Wake Up by PCI Enable / Disable PCI to generate a wake ev ent. Options: Disabled (Default) / Enabled Wakeup on RING T his item allows you control the wake on ring function. Options: Disabled (Default) / Enabled USB Configuration T his item shows the USB controller and using USB device information. BIOS S ETUP UTILITY Advanced USB C onfiguration Enab les support for lega cy USB. AUTO opti on disables lega cy support i f no U SB devices a re conn ected. Modul e Version - 2 .24.3-13.4 USB D evices Enable d: Legac y USB Support USB 2 .0 Controller Mode BIOS EHCI Hand-Off [ Enabled] [ HiSpeed] [ Enabled] > USB Mass Storage Device Conf iguration S elect Screen S elect Item C hange Option +F1 G eneral Help F1 0 S ave and Exit ES C E xit vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc. Legacy USB Support T his item determines if the BIOS should provide legacy support fo r USB devices like the keyboard, mouse, and USB drive. T his is a useful feature when using such USB devices with operating systems that do not natively support USB (e.g. Microso ft DOS or Windows NT). Options: Enabled (Default) / Disabled USB 2.0 Controller Mode T his item allows you to select the operation mode of the USB 2.0 controller. Options: HiSpeed (Default) USB 2.0-480Mbps FullSpeed USB 1.1-12Mbps 14 TA785G3/TA780G3/TA760G3 BIOS Manual BIOS EHCI Hand-Off T his item allows you to enable support for operating systems without an EHCI hand-o ff feature. Options: Enabled (Default) / Disabled USB Mass Storage Dev ice Configuration BIOS SETUP UTILITY Advanced USB Mass Storage Device Configuration USB Mass Storage Reset Delay [20 Sec] Device # Emulation Type Number of seconds POST waits for the USB mass storage device after start unit command. [Auto] +F1 F10 ESC Select Screen Select Item Change Option General Help Save and Exit Exit vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc. USB Mass Storage Reset Delay T his item allows you to set the reset delay for USB mass storage device. Options: 20 Sec (Default) / 10 Sec / 30 Sec / 40 Sec Emulation Type T his item allows you to select the emulation type of the USB mass storage device. Options: Auto (Default) / Floppy / Forced FDD / Hard Disk / CDROM 15 TA785G3/TA780G3/TA760G3 BIOS Manual 3 PCIPnP Menu T his section describes con figuring the PCI bus system. PCI, or Personal Computer Interconn ect, is a system which allows I/O devices to operate at speeds nearing the speed o f the CPU itself uses when communicating with its own special components. Notice z Beware of that setting inappropriate values in items of this menu may cause system to malfunction. Main Advanced PCIPnP BIOS S ETUP UTILITY Boot Chips et Advan ced PCI/PnP S ettings T-Series Exit Clea r NVRAM duri ng Syst em Boot. WARNI NG: Setting w rong values in below sec tions may cause system to m alfunction. Clear NVRAM Plug & Play O/S PCI L atency Timer Alloc ate IRQ to PC I VGA Palet te Snooping PCI I DE BusMaster [ No] [ No] [ 64] [ Yes] [ Disabled] [ Enabled] > PCI Resource > PCI Express Conf iguration +F1 F1 0 ES C S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc. Clear NV RAM T his item allows you to clear the data in the NVRAM (CMOS) by selecting “Yes”. Options: No (Default) / Yes Plug & P lay OS When set to YES, BIOS will only initialize the PnP cards used for the boot sequen ce (VGA, IDE, SCSI). The rest of the cards will be initialized by the PnP operating system like Window™ 95. When set to NO, BIOS will initialize all the PnP cards. For non-PnP operating systems (DOS, Netware™), this option must set to NO. Options: No (Default) / Yes 16 TA785G3/TA780G3/TA760G3 BIOS Manual PCI Latency Timer T his item controls how long a PCI device can hold the PCI bus before another takes over. T he longer the latency, the longer the PCI device can retain control of the bus before handing it over to another PCI device. Options: 64 (Default) / 0-255 Allocate IRQ to PCI V GA T his item allows BIOS to choose a IRQ to assign for the PCI VGA card. Options: Yes (Default) / No Palette Snooping Some old graphic controllers need to “ snoop” on the VGA palette and then map it to their display as a way to provide boot information and VGA compatibility. This item allows such snooping to take place. Options: Disabled (Default) / Enabled PCI IDE BusMaster T his item is a toggle for the built-in driver that allows the onbo ard ID E controller to perform DMA (Direct Memory Access) trans fers. Options: Enabled (Default) / Disabled PCI Resource BIOS SETUP UTILITY PCIPnP PCI Resource IRQ3 IRQ4 IRQ5 IRQ7 IRQ9 IRQ10 IRQ11 IRQ14 IRQ15 DMA DMA DMA DMA DMA DMA [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Available] Channel Channel Channel Channel Channel Channel 0 1 3 5 6 7 Reserved Memory Size [Available] [Available] [Available] [Available] [Available] [Available] Available: Specified IRQ is available to be used by PCI/PnP devices. Reserved: Specified IRQ is reserved for use by Legacy ISA devices. +F1 F10 ESC Select Screen Select Item Change Option General Help Save and Exit Exit [Disabled] vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc. 17 TA785G3/TA780G3/TA760G3 BIOS Manual IRQ3/4/5/7/9/10/11/14/15 T hese items will allow you to assign each system interrupt a type, depending on the type of device using the interrupt. T he option “Available” means the IRQ is going to assign automatically. Options: Available (Default) / Reserved DMA Channel 0/1/3/5/6/7 T hese items will allow you to assign each DMA channel a type, depending on the type of device using the channel. T he option “ Available” means the channel is going to assign automatically. Options: Available (Default) / Reserved Reserved Memory Size T his item allows BIOS to reserve cert ain memory size for speci fic PCI device. Options: Disabled (Default) / Enabled PCI Express Configuration BIOS SETUP UTILITY PCIPnP PCI Express Configuration Active State Power-Management[Disabled] Enable/Disable PCI Express L0s and L1 link power states. +F1 F10 ESC Select Screen Select Item Change Option General Help Save and Exit Exit vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc. Active State Power-Management T his item sets the ASPM configuration for the PCI Express devices b efore the operating system boots. T his function is for OS which does not support ASPM. Options: Disabled (Default) / Enabled 18 TA785G3/TA780G3/TA760G3 BIOS Manual 4 Boot Menu T his menu allows you to setup the system boot options. Main Advanced PCIPnP BIOS S ETUP UTILITY Boot Chips et Boot Settings Conf iguration > > > > T-Series Exit Spec ifies the Boot Device Prio rity sequenc e. Boo t Device Prio rity Har d Disk Drives Rem ovable Drives CD/ DVD Drives Quick Boot Full Screen LOGO S how AddOn ROM Display Mode Bootu p Num-Lock Inter rupt 19 Captu re Ignor e Memory Erro r Messages BOOT SUCCESS BEEP [ Enabled] [ Enabled] [ Force BIOS] [ ON] [ Disabled] [ Disabled] [ Enabled] S elect Screen S elect Item En terG o to Sub Scr een F1 G eneral Help F1 0 S ave and Exit ES C E xit vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc. Boot De vice Priority Items in this sub-menu specify the boot device priority sequence from the available devices. T he number of device items that appears on the screen depends on the number of devi ces installed in the system. Options: Removable / Hard Disk / CDROM / Legacy LAN / Disabled Hard Disk Drives T he BIOS will attempt to arrange the hard disk boot sequence automatically. You can also ch ange the booting sequence. T he number of device items that appears on the screen depends on the number of devices installed in the system. Options: Pri. Master / Pri. Slave / Sec. Master / Sec. Slave / USB HDD0 / USB HDD1 / USB HDD2 / Bootable Add-in Cards Removable Drives T he BIOS will attempt to arrange the removable drive boot sequence automatically. You can also change the booting sequence. The number of device items that appears on the screen depends on the number of devices installed in the system. Options: Floppy Disks / Zip100 / USB-FDD0 / USB-FDD1 / USB-ZIP0 / USB-ZIP1 / LS120 19 TA785G3/TA780G3/TA760G3 BIOS Manual CD/DV D Drives T he BIOS will attempt to arrange the CD/DVD drive boot sequence automatically. You can also change the booting sequence. The number of device items that appears on the screen depends on the number of devices installed in the system. Options: Pri. Master / Pri. Slave / Sec. Master / Sec. Slave / USB CDROM0 / USB CDROM 1 Quick Boot Enabling this option will cause an ab ridged version o f the Power On Sel f-T est (POST ) to execute after you power up the computer. Options: Enabled (Default) / Disabled Full Screen LOGO Show T his item allows you to enable/disable Full Screen LOGO Show function. Options: Enabled (Default) / Disabled AddOn ROM Display Mode T his item sets the display mode for option ROM. Options: Force BIOS (Default) / Keep Current Bootup Num-Lock Selects the NumLock State after the system switched on. Options: ON (Default) / OFF Interrupt 19 Capture When set to Enabled, this item allows the option ROMs to trap interrupt 19. Options: Disabled (Default) / Enabled Ignore Memory Error Messages When set to Enabled, BIOS would ignore memory error messages. Options: Disabled (Default) / Enabled BOOT S UCCESS BEEP When this item is set to Enabled, BIOS will let user know boot success with beep. Options: Enabled (Default) / Disabled 20 TA785G3/TA780G3/TA760G3 BIOS Manual 5 Chipset Menu T his submenu allows you to configure the speci fic features of the chipset installed on your system. T his chipset manage bus speeds and access to system memory resources, such as DRAM. It also coordinates communications with the PCI bus. Main Advanced PCIPnP BIOS S ETUP UTILITY Boot Chips et Advan ced Chipset S ettings T-Series Exit Opti ons for SB > Sou thBridge Conf iguration > RX7 80 Configurat ion > OnB oard Peripher als Configur ation S elect Screen S elect Item En terG o to Sub Scr een F1 G eneral Help F1 0 S ave and Exit ES C E xit vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc. SouthBridge Configuration BIOS S ETUP UTILITY Chips et South Bridge Chipse t Configurat ion Opti ons for SB H D Azal SB700 CIMx Version : 4.3.0 > SB Azalia Audio Configuratio n > EC Configuration OHCI OHCI EHCI OHCI OHCI EHCI OHCI HC(Bus HC(Bus HC(Bus HC(Bus HC(Bus HC(Bus HC(Bus 0 0 0 0 0 0 0 Dev Dev Dev Dev Dev Dev Dev 18 18 18 19 19 19 20 Fn Fn Fn Fn Fn Fn Fn OnChi p SATA Channe l OnChi p SATA Type SATA IDE Combined Mode 0) 1) 2) 0) 1) 2) 5) [ Enabled] [ Enabled] [ Enabled] [ Enabled] [ Enabled] [ Enabled] [ Enabled] [ Enabled] [ Native IDE] [ Enabled] S elect Screen S elect Item En terG o to Sub Scr een F1 G eneral Help F1 0 S ave and Exit ES C E xit vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc. 21 TA785G3/TA780G3/TA760G3 BIOS Manual SB Azalia Audio Configuration BIOS S ETUP UTILITY Chips et HD Au dio Azalia De vice Azali a Clock Gatin g [ Enabled] [ Disabled] Options Auto Disa bled Enab led +F1 F1 0 ES C S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc. HD Audio Azalia Device T his item allows you to control the HD audio device. Options: Enabled (Default) / Auto / Disabled Azalia Clock Gating Options: Disabled (Default) / Enabled EC Configuration BIOS S ETUP UTILITY Chips et SureB oot Feature SureB oot Timeout [ Enabled] [ 4 Seconds] Options Disa bled Enab led +F1 F1 0 ES C S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc. 22 TA785G3/TA780G3/TA760G3 BIOS Manual SureBoot Feature T his item allows you to control the SureBoot function. SureBoot is a technology that ensures a complete Windows environment will be available disaster recovery situations. Options: Enabled (Default) / Disabled SureBoot Timeout T his item allows you to control the SureBoot timeout. Options: 4 Seconds (Default) / 1 Second / 2 Seconds / 3 Seconds OHCI HC(Bus 0 Dev 18/19/20 Fn 0/1/5) Options: Enabled (Default) / Disabled EHCI HC(Bus 0 Dev 18/19 Fn 2) Options: Enabled (Default) / Disabled OnChip SATA Channel T his option allows you to enable the on-chip Serial AT A. Options: Enabled (Default) / Disabled OnChip SATA Type T his option allows you to select the on-chip Serial AT A operation mode. Options: Native IDE (Default) / RAID / AHCI / Legacy IDE / IDEÆAHCI Option ROM POST Delay Options: Disabled (Default) / 1 ~ 7 Seconds SATA IDE Combined Mode T his option controls the SAT A/PAT A combined mode. Options: Enabled (Default) / Disabled Power Saving Features Disable / Enable power saving features in SB. As general rule, this feature should be disabled for desktop and enabled fo r mobile. See AMD SB700 Power Saving document fo r more details. Options: Disabled (Default) / Enabled 23 TA785G3/TA780G3/TA760G3 BIOS Manual RS780 Configuration BIOS S ETUP UTILITY Chips et Inte rnal Graphic s Conf RS780 Chipset Conf iguration RS780 CIM X Version : 4.4.0 > Int ernal Graphic s Configurat ion > PCI Express Conf iguration Prima ry Video Cont roller [ PCI-GFX0-GPP -IGFX] NB Po wer Managemen t Features [ Auto] S elect Screen S elect Item En terG o to Sub Scr een F1 G eneral Help F1 0 S ave and Exit ES C E xit vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc. Internal Graphics Configuration BIOS S ETUP UTILITY Chips et Inter nal Graphics Configuratio n Options Inter nal Graphics Mode UMA Frame Buffer Size [ UMA] [ Auto] Surro und View FB Lo cation [ Auto] [ Above 4G] AMD 7 80 HD Audio [ Enable] Disa ble UMA +F1 F1 0 ES C S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc. Internal Graphics Mode T his item allows you to select the memory mode used for internal graphi cs device. Options: UMA (Default) / Disable 24 TA785G3/TA780G3/TA760G3 BIOS Manual UMA Frame Buffer Size T his item allows you to choose the UMA frame buffer size for internal graphics. Options: Auto (Default) / 32MB / 64MB / 128MB / 256MB / 512MB Surround View T his item allows you to control the Surround View Function. Options: Auto (Default) / Disabled FB Location T his item allows you to set the FB-DIMM location. Options: Above 4G (Default) / Under 4G AMD 780 HD Audio T his item allows you to control the northbridge HD azalia (HDMI audio) function. Options: Enabled (Default) / Disabled PCI Express Configuration BIOS S ETUP UTILITY Chips et PCI E xpress Config uration GPP S lots Power Li mit, W [ 25 ] > Por t #02 Feature s > NB- SB Port Featu res S elect Screen S elect Item En terU pdate F1 G eneral Help F1 0 S ave and Exit ES C E xit vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc. GPP Slots Power Limit, W Options: 25 (Default) / 0-255 25 TA785G3/TA780G3/TA760G3 BIOS Manual Port #02 Features BIOS S ETUP UTILITY Chips et Gen2 Link Link Slot High Speed Mo de ASPM Width Power Limit, W [ Auto] [ Disabled] [ Auto] [ 75] Auto - RC only adve rtize Gen2 capa bility. +F1 F1 0 ES C S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc. Gen2 High Speed Mode Options: Auto (Default) / Disabled / Software Initiated / Advertised RC Link ASPM Options: Disabled (Default) / L0s / L1 / L0x & L1 Link Width Options: Auto (Default) / x1 / x2 / x4 / x8 / x16 Slot Power Limit, W Options: 75 (Default) / 0-255 NB-SB Port Features BIOS S ETUP UTILITY Chips et NB-SB Link ASPM [ L1] NP NB -SB VC1 Traff ic Support [ Disabled] Link Width [ Auto] Options Disa bled L1 +F1 F1 0 ES C S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc. 26 TA785G3/TA780G3/TA760G3 BIOS Manual NB-SB Link ASPM Options: L1 (Default) / Disabled NP NB-SB VC1 Traffic Support Options: Disabled (Default) / Enabled Link Width Options: Auto (Default) / x1 / x2 / x4 Primary Video Controller T his option allows you to select the video controller in charge. Options: PCI-GFX0-GPP-IGFX (Default) / GFX0-GPP-IGFX-PCI / GPP-GFX0-IGFX-PCI / IGFX-GFX0-GPP-PCI NB Power Management Features T his option controls the NB power management function. Options: Auto (Default) / Disabled OnBoard Peripherals Configuration BIOS S ETUP UTILITY Chips et MAC I D Information Realt ek PCIE NIC Real tek Option RO M [ Enable] [ Disabled] Enab le/Disable Onbo ard RTL8111D L PCIE Network Cont roller +F1 F1 0 ES C S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc. MAC ID Information T his area shows the MAC ID. 27 TA785G3/TA780G3/TA760G3 BIOS Manual Realtek PCIE NIC T his option allows you to control the onboard LAN controller. Options: Enable (Default) / Disable Realtek Option ROM T his item allows you to enable or disable the Onboard LAN Boot ROM. Options: Disabled (Default) / Enabled 28 TA785G3/TA780G3/TA760G3 BIOS Manual 6 T-Series Menu T his submenu allows you to change voltage and clock of various devices. (Howev er, we suggest you use the default setting. Changing the voltage and clock improperly may damage the device.) Notice z Beware of that setting inappropriate values in items of this menu may cause system to malfunction. Main Advanced PCIPnP BIOS S ETUP UTILITY Boot Chips et T-Series T-Ser ies Settings Exit Options WARNI NG: Pl ease Clear C MOS if syste m no display af ter overcloc king. OverC lock Navigato r [ Normal] ===== ====== Automa te OverClock System ==== ======= Auto OverClock Sys tem [ V6-Tech Engi ne] ===== ======= Manua l OverClock System ===== ======= CPU/H T Reference C lock (MHz) [ 200] CPU C onfiguration [ Auto] > CPU Tuning > Clo ck Control > Vol tage Configua tion > DRA M Timing Conf iguration > Mem ory Configura tion > G.P .U Phase Cont rol Integ rated Memory Test [ Disabled] Norm al Auto mate OverClo ck Manu al OverClock +F1 F1 0 ES C S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc. OverClock Navigator OverClock .Navigator is designed for beginners in overclock field. Based on many test and experiments from Biostar Engineer Team, OverClock Navigator provid es 3 default overclo ck con figurations that are able to raise the system perfo rmance. Options: Normal (Default) / Automate OverClock / Manual OverClock 29 TA785G3/TA780G3/TA760G3 BIOS Manual Auto OverClock S ystem Main Advanced PCIPnP BIOS S ETUP UTILITY Boot Chips et T-Series T-Ser ies Settings Exit Options WARNI NG: Pl ease Clear C MOS if syste m no display af ter overcloc king. OverC lock Navigato r [ Automate Ove rClock] ===== ====== Automa te OverClock System ==== ======= Auto OverClock Sys tem [ V6-Tech Engi ne] ===== ======= Manua l OverClock System ===== ======= CPU/H T Reference C lock (MHz) [ 200] CPU C onfiguration [ Auto] > CPU Tuning > Clo ck Control > Vol tage Configua tion > DRA M Timing Conf iguration > Mem ory Configura tion > G.P .U Phase Cont rol Integ rated Memory Test [ Disabled] Norm al Auto mate OverClo ck Manu al OverClock +F1 F1 0 ES C S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc. T he Overclock Navig ator provides 3 different engines helping you to overclock your system. T hese engines will boost your system performan ce to different level. Options: V6 Tech Engine T his engine will make a good over-clock perfo rmance. V8 Tech Engine T his engine will make a better over-clo ck perfo rmance. V12 T ech Engine T his engine will make a best over-clock performance. Cautions: Not every AMD CPU performs the above overclock setting ideally; the difference may vary with the installed CP U model. 30 TA785G3/TA780G3/TA760G3 BIOS Manual Manual Overclock System (M.O.S.) Main Advanced PCIPnP BIOS S ETUP UTILITY Boot Chips et T-Series T-Ser ies Settings Exit Options WARNI NG: Pl ease Clear C MOS if syste m no display af ter overcloc king. OverC lock Navigato r [ Manual OverC lock] ===== ====== Automa te OverClock System ==== ======= Auto OverClock Sys tem [ V6-Tech Engi ne] ===== ======= Manua l OverClock System ===== ======= CPU/H T Reference C lock (MHz) [ 200] CPU C onfiguration [ Auto] > CPU Tuning > Clo ck Control > Vol tage Configua tion > DRA M Timing Conf iguration > Mem ory Configura tion > G.P .U Phase Cont rol Integ rated Memory Test [ Disabled] Norm al Auto mate OverClo ck Manu al OverClock +F1 F1 0 ES C S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc. MOS is designed for experienced overclock users. It allows users to customize personal overclock setting. CPU/HT Reference Clock (MHz) T his item allows BIOS to select CPU Over Clock. Options: 200MHz (Default) / 200MHz~600MHz CPU Configuration T his item allows you to save CPU configuration. Options: Auto (Default) / Configure 1~7 31 TA785G3/TA780G3/TA760G3 BIOS Manual CPU Tuning BIOS S ETUP UTILITY T-Series CPU Vcore Contro l CPU T uning CPU V core CPU N B Over Voltag e Custo m P-States SVID Override NODE0 :PCI-X2 HT Li nk HT Li nk Speed : HT Li nk Width : Advan ced Clock Cal ibration Core Leveling [Auto] [ Auto] [ Disabled] [ Disabled] [ Auto] [ Auto] [ Disabled] [ Auto] +F1 F1 0 ES C S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc. CPU Vcore T his item allows you to select CPU Vcore Control. Options: Auto (Default) / +0.050V ~ +1.450V (Interval: 0.05V) CPU NB Ov er Voltage T his item allows you to select NB Over Voltage Control. Options: Auto (Default) / +0.1V / +0.2V / +0.3V Custom P-States T his item tells BIOS whether to use the setup options below this to configure the P-States, or whether to configure the P-States automatically. Options: Disabled (Default) / Enabled Core FID T his item allows you to select the Ratio/Frequency of AM2+ CPU. Options: x8.0 1600MHz ~ x15.0 3000MHz (Differed by CPU) 32 TA785G3/TA780G3/TA760G3 BIOS Manual Core VID T his function allows you to adjust the voltage of CPU. Options: 0.0125V ~ 1.3500V (Differed by CPU). Core DID Options: Divided by 1 (Default) / Divided by 2 / Divided by 4 / Divided by 8 / Divided by 16 NB VID Set the voltage to use for NB PState selected Value is saved in the _PSS object.. Options: 1.2000V (Default) / 0.0125V ~ 1.3500V. NB FID T his item allows you to select the Frequency o f NB chip. Options: 2000MHz (Default) / 800MHz ~ 2000MHz NB DID Options: Divided by 1 (Default) / Divided by 2 SVID Override Options: Disabled (Default) / 0.800V ~ 1.550V (Interval: 0.025V) HT Link Speed T he HyperT ransport link will run at this speed if it is slower than or equ al to the system clock and the board is capable. Options: Auto (Default) / 200MHz / 400MHz / 600MHz / 800MHz / 1GHz / 1.2GHz / 1.4GHz / 1.6GHz / 1.8GHz / 2.0GHz HT Link Width T he HyperT ransport link will run at this width. Options: Auto (Default) / 8 Bit / 16 Bit 33 TA785G3/TA780G3/TA760G3 BIOS Manual Advanced Clock Calibration Advanced Clock Calibration (ACC) is an enhanced technology fo r overclocking, needing support from both chipset and CPU. When enabled, it will improve the stability of advanced overclocking greatly. Options: Disabled (Default) / Auto / All Cores / Per Core Value (All Cores) / Value (Core 0) / Value (Core 1) / Value (Core 2)/ Value (Core 3) T his item shows only when “ Advanced Clock Calibration” is set to “All Cores” or “Per Core”. Options: -2% (Default) / 0% / +2% / +4% / +6% / +8% / +10% / +12% / -4% / -6% / -8% / -10% / -12% Core Leveling Options: Auto (Default) / Force Single Core / Force Dual Core / Force Tri Core / Enable all Cores Clock Control BIOS S ETUP UTILITY T-Series Clock Control PCIE Reference Clo ck (MHZ) SB Re ference Clock (MHZ) Sprea d Spectrum GFX E ngine Clock O verride [ 100] [ 100] [ Disabled] [ Disabled] +F1 F1 0 ES C S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc. PCIE/SB Reference Clock (MHz) T his item allows you to select AT IG/SB Referen ce Clock. Options: 100 (Default) / 101~500 34 TA785G3/TA780G3/TA760G3 BIOS Manual Spread Spectrum T his item allows you to control Spread Spectrum fun ction. Options: Disabled (Default) / Enabled GFX Engine Clock Override T his item allows you to control the internal GFX engine clock override function. Options: Disabled (Default) / Enabled GFX Engine Clock T his item allows BIOS to select onboard GPU Over Clock. Options: 500 (Default) / 150 ~ 1000 Voltage Configuration BIOS S ETUP UTILITY T-Series Volta ge Configurat ion CPU V core CPU-N B Over Voltag e Memor y Over Voltag e HT Over V oltage Chips et Over Volta ge CPU Vcore Contro l [Auto] [ Auto] [ 1.60V] [1.2 2V] [ 1.14V] +F1 F1 0 ES C S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc. CPU Vcore T his item allows you to select CPU Vcore Control. Options: Auto (Default) / +0.050V ~ +1.450V (Interval: 0.05V) CPU NB Ov er Voltage T his item allows you to select NB Over Voltage Control. Options: Auto (Default) / +0.050V ~ +1.450V (Interval: 0.05V) 35 TA785G3/TA780G3/TA760G3 BIOS Manual Memory Over Voltage T his item allows you to select DDR Over Voltage Control. Options: 1.60V (Default) / 1.70V ~ 2.30V (Interval: 0.1V) HT Ov er Voltage T his item allows you to select chipset Voltage Control. Options: 1.22V (Default) / 1.27V / 1.32V / 1.37V Chipset Over Voltage T his item allows you to select Vtt Voltage Control. Options: 1.14V (Default) / 1.18V / 1.23V / 1.27V DRAM Timing Configuration BIOS S ETUP UTILITY T-Series DRAM Timing Config uration Memor y Clock Mode Mem ory CLK DRAM Timing Mode [ Auto] : [ Auto] CAS Lat ency(Tcl) : RAS /CAS Delay(Tr cd) : Row Precharge Ti me(Trp): Min Active RAS(T ras) : RAS /RAS Delay(Tr rd) : Row Cyc le (Trc) : Sele ct the DRAM Freq uency progra mming meth od. If Auto, the DRAM speed w ill be b ased on SPDs . If L imit, the DR AM spe will not exceed the spec ified value. If Manu al, the DRAM speed spec ified will b e prog rammed regar dless. S elect Screen S elect Item +C hange Option F1 G eneral Help F1 0 S ave and Exit ES C E xit vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc. Memory Clock Mode T his item allows you to control the Memory Clock. Options: Auto (Default) / Manual / Limit Memclock Value T his item allows you to set the Memory Clock. Options: DDR3-800 (Default) / DDR3-1066 / DDR3-1333 / DDR3-1600 / Auto 36 TA785G3/TA780G3/TA760G3 BIOS Manual DRAM Timing Mode T his item allows you to choose to manually or automatically regul ate the DRAM T iming. Options: Auto (Default) / DCT0 / DCT 1 / Both CAS Latency (CL) Options: Auto (Default) / 3~6 CLK / 7CLK DH_Only 2T Command Options: Auto (Default) TR CD Options: Auto (Default) TRP Options: Auto (Default) tR TP Options: Auto (Default) TR AS Options: Auto (Default) TR C Options: Auto (Default) tWR Options: Auto (Default) TR RD Options: Auto (Default) 37 TA785G3/TA780G3/TA760G3 BIOS Manual tWTR Options: Auto (Default) tRFC0 / tRFC1 / tRFC2 / tRFC3 Options: Auto (Default) Memory Configuration BIOS S ETUP UTILITY T-Series Memor y Configurati on Bank Interleaving Chann el Interleavi ng Enabl e Clock to Al l DIMMs MemCl k Tristate C3 /ATLVID Memor y Hole Remapp ing DCT U nganged Mode Power Down Enable Pag e Smashing Enab le Bank Memo ry Inte rleaving [ Auto] [ XOR of Addre ss bit] [ Disabled] [ Disabled] [ Enabled] [ Always] [ Disabled] [ Disabled] > ECC Configuratio n +F1 F1 0 ES C S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc. Bank Interleaving Bank Interleaving is an advanced chipset technique used to improve memory perform ance. Memory interleaving increases bandwidth by allowing simultaneous access to more than one piece of memory. Options: Auto (Default) / Disabled Channel Interleaving T his item allows you to control the DDR2 dual-channel function. Options: XOR of Address bits [20:16, 6] (Default) / XOR of Address bits [20:16, 9] / Address bits 6 / Address bits 12 / Disabled 38 TA785G3/TA780G3/TA760G3 BIOS Manual Enable Clock to All DIMMs T his item determines whether the BIOS should actively reduce EMI (Electromagn etic Interference) and reduce power consumption by turning off unoccupied or inactive DIMM slots. Options: Disabled (Default) / Enabled MemClk Tristate C3/ATLVID T his item enables or disables the MemClk T ristate function in C3 Mode. Options: Disabled (Default) / Enabled Memory Hole Remapping T his item allows you to enable or disable the remapping of the overlapped PCI memory above the total physical memory. Only 64-bit OS supports this function. Options: Enabled (Default) / Disabled DC T Unganged Mode T his item controls the DRAM controller ganged (128bit*1) / unganged (64bit*2) dual-chann el operation mode. If two DRAM modules with different size are installed, using unganged mode can still make it run in dual-channel operation. Options: Always (Default) / Auto Power Dow n Enable T his item controls the DRAM power down function. Options: Disabled (Default) / Enabled Page Smashing T his item is S/W Control of Page Smashing Mechanism. Options: Disabled (Default) / IC / DC / Both 39 TA785G3/TA780G3/TA760G3 BIOS Manual ECC Configuration BIOS SETU P U TILITY T-Series ECC Configurat ion ECC Mode DRAM ECC Ena ble DRAM SCRUB R EDIRECT 4-Bit ECC Mo de DRAM BG Scru b Data Cache B G Scrub L2 Cache BG Scrub L3 Cache BG Scrub [Dis abled] [Dis abled] [Dis abled] [Dis abled] [Dis abled] [Dis abled] [Dis abled] [Dis abled] Set the level of ECC protection. Note: The Super ECC mode dynamically sets the DRAM scrub rate so all of memory is scrubbed in 8 hours. +F1 F10 ESC S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit vxx .xx (C)Copyright 1985-200x, American Me gatrends, Inc. ECC Mode T his item allows you to select the DRAM ECC Mode. Options: Disabled (Default) / Basic / Good / Super / Max / User DRAM ECC Enabled Options: Disabled (Default) / Enabled DRAM Scrub Redirect Options: Disabled (Default) / Enabled 4-bit ECC Mode Options: Disabled (Default) / Enabled DRAM BG Scrub/Data Cache BG Scrub/L2 Cache BG Scrub/L3 Cache BG Scrub Options: Disabled (Default) / 40ns / 80ns / 160ns / 320ns / 640ns / 1.28us / 2.56us / 5.12us / 10.2us / 20.5us / 41.0us / 81.9us / 163.8us / 327.7us / 655.4us 40 TA785G3/TA780G3/TA760G3 BIOS Manual G.P.U Phase Control BIOS S ETUP UTILITY T-Series G.P.U Phase Contro l Phase Status Options : Auto Off CPU V core: : Curre nt CPU Power : Effic iency : G.P.U Phase Mode [ Auto] +F1 F1 0 ES C S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc. G.P.U Phase Mode T his item allows you to control G.P.U Phase Mode (power saving technology). Options: Auto (Default) / Off 41 TA785G3/TA780G3/TA760G3 BIOS Manual Integrated Memory Test Integrat ed Memory T est allows users to test memory module compatibilities without additional device or softw are. Step 1: T his item is disabled on default; change it to “ Enable” to precede memory test. Main Advanced PCIPnP BIOS S ETUP UTILITY Boot Chips et T-Series T-Ser ies Settings Exit Options WARNI NG: Pl ease Clear C MOS if syste m no display af ter overcloc king. Enab led Disa bled OverC lock Navigato r [ Normal] ===== ====== Automa te OverClock System ==== ======= Auto OverClock Sys tem [ V6-Tech Engi ne] ===== ======= Manua l OverClock System ===== ======= CPU/H T Reference C lock (MHz) [ 200] CPU C onfiguration [ Auto] > CPU Tuning > Clo ck Control > Vol tage Configua tion > DRA M Timing Conf iguration > Mem ory Configura tion > G.P .U Phase Cont rol Integ rated Memory Test [ Enabled] +F1 F1 0 ES C S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc. Step 2: When the process is done, change the setting back from “Enabled” to “Disabled” to complete the test. Main Advanced PCIPnP BIOS S ETUP UTILITY Boot Chips et T-Series T-Ser ies Settings Exit Options WARNI NG: Pl ease Clear C MOS if syste m no display af ter overcloc king. OverC lock Navigato r [ Normal] ===== ====== Automa te OverClock System ==== ======= Auto OverClock Sys tem [ V6-Tech Engi ne] ===== ======= Manua l OverClock System ===== ======= CPU/H T Reference C lock (MHz) [ 200] CPU C onfiguration [ Auto] > CPU Tuning > Clo ck Control > Vol tage Configua tion > DRA M Timing Conf iguration > Mem ory Configura tion > G.P .U Phase Cont rol Integ rated Memory Test [ Disabled] Enab led Disa bled +F1 F1 0 ES C S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc. 42 TA785G3/TA780G3/TA760G3 BIOS Manual 7 Exit Menu T his menu allows you to load the optimal default settings, and save or discard the changes to the BIOS items. Main Advan ced PCIPnP BIOS SETU P U TILITY Boot Chipset Exit Options T-Series Exit Exit system setup after saving the changes. Save Changes a nd Exit Discard Change s and Exit Discard Change s F10 key can be used for this operation. Load Optimal D efaults CMOS Backup Fu nction Security Setti ngs S elect Screen S elect Item EnterG o to Sub Screen F1 G eneral Help F10 S ave and Exit ESC E xit > Security vxx .xx (C)Copyright 1985-200x, American Me gatrends, Inc. Save Changes and Exit Save all configuration changes to CMOS RAM and exit setup. Discard Changes and Exit Abandon all changes made during the current session and exit setup. Discard Changes Abandon all changes made during the current session and restore the previously saved values. Load Optimal Defaults T his selection allows you to reload the BIOS when problem occurs during system booting sequence. T hese con figurations are facto ry settings optimized fo r this system. 43 TA785G3/TA780G3/TA760G3 BIOS Manual CMOS Backup Function It allows users to save different CMOS settings into BIOS-ROM and reload any saved CMOS setting for customizing system configurations. Moreover, users are able to save an ideal overclock setting during overclock operation. T here are 10 sets o f record address es in total, and users are able to nam e the CMOS data acco rding to personal preference. Main Advan ced PCIPnP BIOS SETU P U TILITY Boot Chipset T-Series Exit Exit Options Save Changes a nd Exit Discard Change s and Exit Discard Change s Load Optimal D efaults CMOS Backup Fu nction CMOS Backup Func CMOS Data Reload CMOS Data Save Security Setti ngs S elect Screen S elect Item EnterG o to Sub Screen F1 G eneral Help F10 S ave and Exit ESC E xit > Security vxx .xx (C)Copyright 1985-200x, American Me gatrends, Inc. Security T his sub-menu allows you to provide/revise supervisor and user password. BIOS SETU P U TILITY Exit Security Setti ngs Install or Change the password. Supervisor Pas sword :Not Installe d User Password :Not Installe d Change Supervi sor Password User Access Le vel Change User Pa ssword Clear User Pas sword Password Check [Ful l Access] [Set up] Boot Sector Vi rus Protection [Dis abled] S elect Screen S elect Item EnterC hange F1 G eneral Help F10 S ave and Exit ESC E xit vxx .xx (C)Copyright 1985-200x, American Me gatrends, Inc. 44 TA785G3/TA780G3/TA760G3 BIOS Manual Change Supervisor Passw ord Setting the supervisor password will prohibit everyone except the supervisor from making changes using the CMOS Setup Utility. You will be prompted with to enter a password. User Acess Level T his item allows supervisor to set the user level. Options: Full Access (Default) / No Access / View Only / Limited Change User Password If the Supervisor Password is not set, then the User Password will function in the same way as the Supervisor Password. If the Supervisor Password is set and the User Password is set, the “User” will only be able to view configurations but will not be able to change them. Clear User Passw ord T his item is for clearing user passwo rd. Passw ord Check T his item is for setting the timing that checking password. Options: Setup (Default) / Always Boot Sector Virus Protection T his option allows you to choose the VIRUS Warning feature that is used to protect the IDE H ard Disk boot sector. If this fun ction is enabled and an attempt is made to write to the boot sector, BIOS will display a warning message on the screen and sound an alarm beep. Options: Disabled (Default) / Enabled 45