Download Sharp LC-30AA1H Specifications

Basic adjustment settings
No signal Off
No operation Off
When set to “Enable”, the power will automatically shut
down if no signal inputs for 15 minutes.
When set to “Enable”, the power will automatically shut
down if there is no operation for 3 hours.
1
Press MENU and the MENU screen displays.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Power Control”.
2
Press c/d to select “Power Control”.
3
Press a/b to select “No Signal Off”, and
then press ENTER.
3
Press a/b to select “No Operation Off”, and
then press ENTER.
• Power control menu displays.
MENU
[Power control ... No Signal Off]
Power control
MENU
[Power control ... No Operation Off]
Power control
Setup
[Manual]
Power Save
No Signal Off
[Disable]
No Signal Off
[Disable]
No Operation Off
[Disable]
No Operation Off
[Disable]
Press c/d to select “Enable”, and then
press ENTER.
Enable
4
Press c/d to select “Enable”, and then
press ENTER.
Disable
Enable
• Five minutes before the power shuts down,
remaining time displays every minute.
NOTE
•
• “Disable” is factory preset value.
42
42
Disable
Five minutes before the power shuts down,
remaining time displays every minute.
NOTE
• “Disable” is factory preset value.
• When a TV programme finishes, and the AVC System
receives signal input, this function may not operate.
LC-37AA1H(E)-e
Setup
[Manual]
Power Save
4
• Power control menu displays.
03.11.6, 8:21 AM