Download Accessline DPS FLEX Specifications

Strata CIX200
4
The Strata CIX200 supports 192 ports and can be
configured as a one or two cabinet system,
consisting of a Base Cabinet and one optional
Expansion Cabinet. One processor model
supports all Strata CIX200 configurations from
smallest to largest.
These cabinets are designed specifically to fit
standard (customer-supplied) 19” racks. The 19”
rack and rack screws must be supplied by the
dealer. Interface cables connect directly to the
front panel or exit the cabinet through a port on
the right side of the cabinet.
The CIX200 uses a single-card common control
processor unit (LCTU2A), with a high-speed 32bit RISC processor, 64 MB DRAM working
memory, SRAM with lithium battery on-board
flash program memory, and removable Toshiba
Secure Digital flash memory.
Base Cabinet
The Base Cabinet (CHSUB192A) has four slots. The upper left slot, labeled B101 is reserved for
the common control unit. The other three slots (labeled S101, S102 and S103) are universal card
slots capable of hosting any of the station, line, and option interface PCBs compatible with the
Strata CIX systems. The Base Cabinet also has a dedicated LSLU slot located at the back of the
cabinet for two analog ports with two connectors on the front of the cabinet.
Expansion Cabinets
One Expansion Cabinet (CHSUE192A) can be added to increase the system station and CO line
capacity. The Expansion Cabinet has four universal slots for interface cards (labeled S201 ~ S204).
Compatible interface cards include the MIPU / LIPU / LIPS IP interface cards and the current
Strata CIX interface cards that support CO lines, digital telephones, analog stations, etc.
Refer to “Capacities” on page 215 for cabinet slot and station/line capacities.
Strata CIX General Description
08/14
19