Download Multi-Tech ISIHI-2S User guide

Transcript
Hardware Installation
ISIHP-2U LED Indicators
P LED Indicator
D P
LINE 1
D P
LINE 2
• Indicates U interface status connection.
• Controlled by NT-1, which converts S/T
interface (4-wire ISDN) to U interface
(2-wire ISDN).
• When U interface and S/T interface are NOT
active, LED remains off.
• Flashes 8 times/second (8 Hz)—U interface
is attempting to activate.
• Flashes once/second (1 Hz)—U interface is
active; S/T interface is not fully active.
• Lit, not flashing—Both U and S/T interfaces
are active.
D LED Indicator
• Lights when the ISIHP-2U is turned on.
• Flashes until SPIDs are verified with the
central office switch; then remains lit without
flashing.
•
Indicates data link layer status.
MultiModemISI Hybrid Server Cards, ISIHP & ISIHI Series
21