Download Velocity Edge GX440 User guide

ALEOS 4.2.3 User Guide
Status Field
Description
Bytes Received
Number of bytes received from the network since system startup or reboot.
Packets Sent
Number of packets sent to the network since system startup or reboot.
Packets Received
Number of packets received from the network since system startup or reboot.
Figure 3-4: ACEmanager: Status - WAN/Cellular - GSM
Status Field
Description
Cellular IP Address
Provides the cellular WAN IP Address.
ESN/EID/IMEI
Provides the Electronic Serial Number for the internal radio.
SIM ID
Provides the identification number for the current SIM card in use.
APN Status
Identifies the current APN in use by the network connection.
• (Auto Configured) is a default APN based on the SIM card in use.
• (User Entered) is a custom APN entered manually into the configuration.
Note: APN is configured on the WAN configuration tab.
IMSI
Identifies the International Mobile Subscriber Identity number.
Cell ID
A unique number that identifies each base transceiver station (BTS) or sector of a BTS
within an LAC.
LAC
The Location Area Code.
BSIC
The Base Station Identity Code.
Keepalive IP Address
The IP address that WAN Keep Alive uses to test cellular connectivity (if enabled).
Keepalive Ping Time
(min)
The amount of time between Keep Alive pings in minutes.
30
20080616