Download Mircom QMT-5302 Specifications
Transcript
FleX-NetTM Installation and Operation Manual QMP-5101N Network Paging Wiring for Mass Notification QMP-5101N Network Master Paging Control Module Wiring to the ANC-5000 Audio Network Controller Module MNS - ACU FX- LOC(R) TWISTED SHIELDED PAIR CABLE QMP-5101N Network Master Paging Module PTT TWISTED SHIELDED PAIR CABLE Wire the Paging Bus to all other ANC-5000 Audio Network Controller Modules OUT to IN. See Figure 73 for more details. NOT USED G.A. Input RS-485 IN IN - This connection to Aux Power is not required when ANC-5000 is installed in the Audio Card Cage + - MIC PTT OUT S + + + - QMP-5101N Network Master Paging Module S - MIC Daisy chain PTT and MIC to next FX-LOC(R). At the last FX-LOC(R) QMP-5101N Paging Mocule connect EOL resistors (3K9 ohms value) to + and - of both the MIC and PTT terminals. S - + S - + L - + S - + S - + - + - + PAGING BUS PTT ANC-5000 Audio Network Controller Module in the MNS (ACU) Remote Power Input MIC JW8 JW7 Jumpers JW7 and JW8 must be installed at all times. 139