Download Viessmann VD2-860 Technical data
Transcript
Components – Vitotronic 100 Flue gas temperature sensor (for VD2/VD2A/CT3 only) The sensor measures the flue gas temperature and monitors the selected limit value. Electrical connection The sensor is inserted in socket ”15” on the boiler control. Check flue gas temperature sensor 1. Disconnect plug aG in the terminal compartment of the boiler control. 2. Measure resistance of sensor at terminals ”1” and ”2” of the plug. 1020 980 Flue gas temperature in °C / °F Resistance in Ω 180 / 176 160 / 320 200 / 392 650 800 880 3. Compare the value measured with the actual temperature. If the value differs significantly, check installation and, if necessary, replace sensor. 940 900 860 Technical data Degree of protection: IP 60 Ambient temperature: During operation: –20 to + 600°C 32 to + 1112°F During storage and transport: –20 to + 670°C –4 to + 158°F 820 780 740 700 660 620 Resistance in Ω 5351 340 v1.4 580 540 500 0 32 40 80 120 160 200 240 104 176 248 360 392 464 280 536 Flue gas temperature in °C / °F 139