Download Carrier 73X Technical data

ALX
73x
STARTUP AND OPERATION
Inserting label material
WARNING!
Danger of injury due to moving and rapidly
rotating parts!
 Before inserting the label roll ensure that
the printer and dispenser are both in offline
mode.
Danger of injury caused by falling label roll.
 Wear safety shoes.
Inserting the label roll
1. If necessary, adjust the diameter of the unwinding
mandrel to the core diameter of the material roll;
see section Adjusting the core diameter of the
unwinder on page 75.
2. Push the material roll [44A] onto the dispenser until
it stops.
B
A
3. Turn the knob [44B] clockwise until the label roll is
firmly seated.
 For the remainder of the material flow, see section Threading in the label web  on page 65.
[44] Inserting a material roll
64 | Inserting label material
Operating manual ALX 73x | file version 05 | 03/2012