Download Savin 4018 Specifications

Message List
Message
Causes and solutions
inetd start.
An inetd has started.
<interface> started with IP: <IP address>
<IP address> has been set for <Interface> and
<Interface> started.
<Interface>: Subnet overlap.
Subnet from Netmask and the IP address you
tried to set for <Interface> overlap the subnet
of another interface.
Set Subnet so it does not overlap with another
interface.
IPP cancel-job: permission denied.
The printer could not authenticate the name of
the user attempting to cancel a job.
ipp disable.
Printing with ipp is disabled.
ipp enable.
Printing with ipp is enabled.
IPP job canceled. jobid=%d.
The spooled job has been canceled due to error or user request.
job canceled. jobid=%d.
The spooled job has been canceled due to error or user request.
LeaseTime=<lease time>(sec), RenewTime=<renew time>(sec).
The resource lease time received from the
DHCP server is <lease time> in seconds. The
renewal time is also <renew time> in seconds.
Login to fileserver <file server name>
(<IPX|IP>,<NDS|BINDERY>)
(In print server mode) Logged on to the file
server with NDS or BINDERY mode.
multid start.
Data transmission service for multiprotocols
has started.
Name registration failed. name=<NetBIOS
name>
The printer could not register the name of
NetBIOS.
Name registration success in Broadcast
name=<NetBIOS name>
The NetBIOS name was successfully registered from a broadcast.
Name registration success. WINS Server=<WINS Server Address> NetBIOS
Name=<NetBIOS name>
The NetBIOS name was successfully registered to the WINS server.
nbstart start.(NetBEUI)
The server for setting the NetBEUI protocol
stack has started.
nbtd start.
nbtd (NetBIOS over TCP/IP Daemon) has
started. (Available only in DHCP mode)
9
NetBEUI Computer Name =<computer name> The NetBEUI Computer Name is defined as
<computer name>.
nmsd start. (NetBEUI)
nmsd (Name Server Daemon) has started.
nprinter start. (NetWare)
(In remote printer mode) NetWare service has
started.
nwstart start. (NetWare)
The service for NetWare protocol stack setting
has started.
123