Download WAGO Modular IO System INTERBUS S Technical data

The numerical formats
All temperature values are represented in a uniform numerical format. In the default
setting (type K) one Bit corresponds to 0.1°C. The output value corresponds to the
temperature range of each sensor as defined according to standards. By using a
configuration tool, the output formats can be chosen. The linearization can be switched
off and the building of the reference temperature can be switched off also. The
following table identifies the numerical format on the default range (type K).
Temp.
°C
850
Voltage
(uV)
35314
100
Binary Value
0010 0001 0011 0100
Hex.
2134
Dec.
8500
4095
0000 0011 1110 1000
03E8
1000
25,5
1021
0000 0000 1111 1111
00FF
255
0,1
4
0000 0000 0000 0001
0001
1
0
0
0000 0000 0000 0000
0000
0
-0,1
-4
1111 1111 1111 1111
FFFF
-1
-25,5
-986
1111 1111 0000 0001
FF01
-255
-100
-3553
1111 1100 0001 1000
FC18
-1000
Table 2: Numerical formats
Input for thermocouple modules 750-462,469
4
:$*2Ç,2Ç6<67(0