Download BMW E36 Convertible Operating instructions
Transcript
that the lower inside male clip fits into the metal Dring on the chassis. (pictured above). Page 1 2 q q q If you can not get the bottom inside clip in place you can simply break it off (if it is not already broken). Do not worry about this as the bottom seat cushion holds the bottom of the bolster firmly in place. Push in the top of the side bolster to the upper mounting point. To reinstall the black plastic cap to the top of the bolster, you have to pop out a plastic pin from the top of the cap. This pin should be pushed or pulled up to reinstall the cap and than pushed down to lock the cap back onto the car. Once this is done you can reinstall the black circular finishing cap to the side of the top cap.