Download Copy Reference Part 1

AdonisC2_ENcopy122F_FM.book Page 9 Thursday, February 15, 2001 3:23 PM
Control Panel
1. Screen Contrast knob
8. {Energy Saver}} key
Adjusts the brightness of the display panel.
Press to switch to and from Energy Saver
mode. ⇒ P.68 “Energy Saver Mode”.
2. Indicators
9. {Interrupt}} key
These indicators show errors or the status
of the machine. ⇒ P.169 “Troubleshooting”.
Press to make interrupt a long copy job to
make copies. ⇒ P.68 “Interrupt Copy”.
3. {User Tools/Counter}} key
This indicator goes on when the main
power switch is turned on, and goes off
when the switch is turned off.
• User Tools
Press to change the default settings
and conditions to meet your requirements.
• Counter
Press to check or print the total number of copies made.
4. Display panel
Shows operation status, error messages,
and function menus. ⇒ P.11 “Display
Panel”.
5. {Check Modes}} key
Press to check the entered copy job settings.
6. {Program}} key
Press to select the program mode. ⇒ P.64
“Programs”.
7. {Clear Modes}} key
Press to clear the previously entered copy
job settings.
10. Main power indicator
11. Operation switch
Press this switch to turn the power on
(the On indicator goes on). To turn the
power off, press this switch again (the On
indicator goes off).
12. {Sample Copy}} key
Use this key to make a single sample
copy before starting a long copy run. By
checking the sample copy and making
any necessary changes to the image quality settings before you make multiple
copies, you can save time and paper. ⇒
P.69 “Sample Copy”.
13. {Start}} key
Press to start copying. Press to start scanning and printing in Document Server
mode.
9