Download Copy Reference Part 1

AdonisC2_ENcopy122F_FM.book Page 75 Thursday, February 15, 2001 3:23 PM
Size Magnification
Size Magnification
This function calculates an enlargement or reduction ratio based upon
the lengths of the original and copy.
B Press the [Specifid Ratio] key.
2
Amm
amm
C Make sure that the [Specifid Ratio]
key is highlighted.
Preparation
Measure and specify the lengths of
the original and copy by comparing “A” with “a.”
Limitation
❒ If the calculated ratio is over the
maximum or under the minimum
ratio, it is corrected within the
range of the ratio automatically.
However, with some ratios, parts
of the image might not be copied
or blank margins will appear on
copies.
Note
❒ A ratio is selected in the range of 25
to 400%.
A Press the [Reduce/Enlarge] key.
D Enter
the length of the original
with the number keys and press
the [#] key.
Note
❒ You can enter sizes within the
following ranges:
Metric 1 – 999mm (in 1mm steps)
version
Inch
0.1" – 99.9" (in 0.1" steps)
version
❒ To change the length entered,
press the [Clear] or {Clear/Stop}
key and enter the new length.
75