Download Craftsman 917.28863 Product specifications
Transcript
Operator's IlJlllllllllllll II I Manual II (RRFTSMRN° IIIIHIII III I LAWN TRACTOR 26.0 HP,* 54" Mower Electric Start Automatic Transmission Model No. 917.28863 • Espa_ol, p. 37 [_ differently This product from haspreviously a low emission built engines, engine which Before operates you start the engine, read and understand this manual. IMPORTANT: For answers to your questions Read and follow all Safety Rules and Instructions before about this product, Call: operating this equipment. 1-800-659-5917 SEARS Craftsman 5 am - 5 pro, Mon- Help Line Sat Gasoline containing up to 10% ethanol (El0) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (ElO)wiii void the product warranty. Esta m_quina puede utilizar gasolina con un contenido de hasta el 10% de etanol (Et0). El uso de una gasolina que supere el 10% de etanol (El0) anulard la garantla del producto. Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A. Visit our Craftsman website:www.sears.com!craftsman *Asra_ed bytheeng_ns manufacturer ........ 581887396 Warranty .................................................. 2 Safety Rules ............................................ 3 Product Specifications ............................. 6 Assembly/Pre-Operation ......................... 7 Operation ............................................... 13 Maintenance Schedule .......................... 2t Maintenance .......................................... 21 Service and Adjustments ....................... 26 Storage .................................................. 3I Troubleshooting ..................................... 32 Sears Service .......................... Back Cover Craftsman Riding Equipment Warranty CRAFTSMAN FULL WARRANTY FOR TWO YEARS from the date of purchase, all non-expendable parts of this riding equipment are warranted against any defects in material or workmanship. A defective non-expendable part will receive free in-home repair or replacement if repair is impossible. FOR FIVE YEARS from the date of purchase, the frame and front axle of this riding equipment are warranted against any defects in material or workmanship. A defective frame or front axle will receive free in-home repair or replacement ff repair is impossible. FOR 90 DAYS from the date of purchase, the battery (an expendable part) of this riding equipment is warranted against any defects in material or workmanship (our testing proves that it will not hold a charge), A defective battery will receive free in-home replacement. ADDITIONAL LIFETIME LIMITED WARRANTY on CAST IRON FRONT AXLE (if equipped) FOR AS LONG AS IT iS USED by the original owner after the fifth year from the date of purchase, the cast iron front axle (if equipped) of this riding equipment is warranted against any defects in material or workmanship. With proof of purchase, a defective cast front axle will receive free in-home replacement. WARRANTY SERVICE For warranty coverage details to obtain free repair or replacement, call 1-800-659-5917 or visit the web site: www.craftsman.com in all cases above, if part repair or replacement is impossible, the riding equipment will be replaced free of charge with the same or an equivalent model. All of the above warranty coverage is void if this riding equipment is ever used while providing commercial services or if rented to another person. This warranty covers ONLY defects in material and workmanship. Warranty coverage does NOT include: • Expendable parts (except battery) that can wear out from normal use within the warranty period, including but not limited to blades, spark plugs, air cleaners, belts, and oil filters. • Standard maintenance servicing, oil changes, or tune-ups. • Tire replacement or repair caused by punctures from outside objects, such as nails, thorns, stumps, or glass. -=_-Tire Orwheeirepiacernent_or repair improperoperation or .... maintenance. • Repairs necessary because of operator abuse, including but not limited to damage caused by . towing objects beyond the capability of the riding equipment, impacting objects that bend the frame, axle assembly or crankshaft, or over-speeding the engine. • Repairs necessary because of operator negligence, including but not limited to, electrical and mechanical damage caused by improper storage, failure to use the proper grade and amount of engine oil, failure to keep the deck clear of flammable debris, or failure to maintain the riding equipment according to the instructions contained in the operator's manual. • Engine (fuel system) cleaning or repairs caused by fuel determined to be contaminated or oxidized (stale). In general, fuel should be used within 30 days of its purchase date. • Normal deterioration and wear of the exterior finishes, or product label replacement. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Sears Brands Management ...... Corporation, Hoffman Estates, IL 60179 d_I_DANGER:This cutting machine is capable of amputating hands and feet and throwing objects, Failure to observe the following safety instructions could result in serious injury or death. _IbWARNING: 1n orderto prevent accidental starting when setting up, transporting, adjusting or making repairs, always disconnect spark plug wire and place wire where it cannot contact spark plug. • Never direct discharged materialtoward anyone. Avoid discharging material against a wall or obstruction, Material may ricochet back toward the operator. Stop the blades when crossing gravel surfaces. _ILWARNING: Do not coast down a hill in • Do not operate machine without the enneutral, you may lose control of the tractor. tire grass catcher, discharge chute, or othersafety devices inplace and working, _I_WARNING: Tow only the attachments • Slow down before turning, that are recommended by and comply with • Never leave a running machine unatspecifications of the manufacturer of your tended. Always turn off blades, set tractor. Use common sense when towing. parkingbrake, stop engine, and remove Operate only at the lowest possible speed keys before dismounting. when on a slope. Too heavy of a load, while • Disengage blades when not mowing. on a slope, is dangerous. Tires can lose Shut off engine and wait for all parts to traction with the ground and cause you to cometo a complete stop before cleaning lose control of your tractor. the machine, removing the grass catcher, or unclogging the discharge chute. _WARNING: Engine exhaust, some of • Operate machine only in daytight or good itsconstituents, and certain vehicle compoartificial light, nents contain or emit chemicals known to ° Do not operate the machine while under the State of California to cause cancer and the influence of alcohol or drugs. birth defects or other reproductive harm. o Watch for traffic when operating near or _t, WARNING: Battery posts, terminals and crossing roadways. related accessories contain lead and lead • Use extracare when loading or unloading compounds, chemicals known tothe State of the machine into a trailer or truck. California to cause cancer and birth defects • Always wear eye protection when operator other reproductive harm. Wash hands ing machine. after handling. • Data indicates that operators, age 60 years and above, are involved in a large I. GENERAL OPERATION percentage of riding mower-related injuries. These operators should evaluate • Read, understand,and follow allinstructheir ability to operate the riding mower tions on the machine and in the manual safely enoughto protectthemselves and before starting. o ' " *injury ' others from senous ...... Dp°r_s°trPUthe?n.. ds °T&Itnn_ep!clenag ........... " ...Fo!!owthe manufa._ure[:s iecornmenda_" ....... ttonforwheel weights or counterweights of the di schar ge opening at all times, • Only allow responsible adults, who are " Keep machine free of grass, leaves or other debris build-upwhich can touchhot familiar with the instructions, to operate exhaust/engine parts and burn, Do not the machine. allow the mower to plow leaves or other • Clear the area of objects such as rocks, debris which can cause build-up to octoys, wire, etc., which could be picked cur, Clean any oil or fuel spillage before up and thrown by the blades. operating or storing the machine, Allow • Be sure the area is clear of bystanders machine to cool before storage, before operating. Stop machine ifanyone enters the area, . Never carry passengers. • Do not mow inreverse unless absolutely necessary.Always look down andbehind before and while backing. Ii, SLOPE OPERATION • Keep children out of the mowing area and inthe watchful care of a responsible Slopes are a major factor related to loss of adult other than the operator. control and tip-over accidents, which can , Be alert and turn machine off if a child result in severe injury or death. Operation enters the area. on all slopes requires extra caution. If you ° Before and while backing, look behind cannot back up the slope or ifyou fee] uneasy and down for small children. on it, do not mow it. , Never carry children, even withthe blades - Mow up and down slopes, not across. shut off. They mayfall offand be seriously - Watch for holes, ruts, bumps, rocks, or injured or interfere with safe machine other hidden objects. Uneven terrain operation. Children who have been given could overturn the machine. Tall grass can hide obstacles. rides inthe past may suddenly appear in the mowing area for another ride and be • Choose a tow ground speed so that you run over or backed over bythe machine. will not have to stop or shift while on the • Never allow children to olqeratethe maslope. chine. • Do not mow on wet grass. Tires may lose traction. • Use extra care when approaching blind corners, shrubs, trees, or other objects Always keep the machine in gear when that may block your view of a child. going down slopes. Do notshiftto neutral and coast downhill. IV. TOWING • Avoid starting, stopping, or turning on a ° Tow only witha machine that has a hitch slope. Ifthe tires Iosetraction, disengage designed for towing. Do not attach towed the blades and proceed slowly straight equipment except at the hitch point. down the slope. • Foltowthe manufacturer's recommenda° Keep all movement on the slopes slow tionfor weight limits for towed eq uipme nt and gradual. Do not make sudden and towing on slopes. changes in speed or direction, which • Never allow children or others in or on could cause the machine to roll over. towed equipment, • Use extra care while operating machine • On slopes, the weight ofthetowed equipwith grass catchers or other attachments; ment may cause loss oftraction and loss they can affect the stability of the maof control. chine. Do no use on steep slopes. • Travel slowly and allow extra distance to , Do not try to stabilize the machine by stop. putting your foot on the ground. V. SERVICE ° Do not mow near drop-offs, ditches, or embankments, The machine could SAFE HANDLING OF GASOLINE suddenly roll over if a wheel is over the To avoid personal injury or property damedge or if the edge caves in. age, use extreme care in handling gasoline. I!1. CHILDREN Gasoline is extremely flammable and the ___ vapors are explosive, WARNING: CHILDRENCAN BE INJURED.........; Exfinguist_ all cigarettesl Cigarsl pipesl ..... BYTHIS EQUIPMENT.The American Acadeand other sources of ignition. my of Pediatrics recommends that children • Use only approved gasoline container. be a minimum of t 2 year of age before op° Never remove gas cap or add fuel with erating a pedestrian controlled lawn mower the engine running. Allow engine to cool and a minimum of 16 years of age before before refueling. operating a riding lawn mower. • Never fuel the machine indoors. ° Never storethe machine orfuel container Tragic accidents can occur if the operator is not alert to the presence of children, where there is an open flame, spark, or Children are often attracted to the machine pilot light such as on a water heater or and the mowing activity. Never assume other appliances, • Never fill containers inside a vehicle or that children will remain where you last saw them. • on a truck or trailer bed with plastic liner, Always place containers on the ground away from your vehicle when filling. * Remove gas-powered equipment from ° Nevertamperwith safety devices. Check thetruckortrailerandrefuel it onthe their proper operation regularly. ground. Ifthisisnotpossible, thenrefuel • Keep machine free of grass, leaves, or suchequipmentwith aportablecontainer,other debris build-up. Clean oil or fuel rather thanfroma gasoline dispenser spillage and remove any fuel-soaked denozzle. bris. Allow machineto cool beforestoring. . Keep thenozzle incontact withtherim • If you strike a foreign object, stop and inspectthe machine. Repair,if necessary, ofthefueltankorcontainer opening at alltimes until fueling iscomplete. Donot before restarting. • Never make any adjustments or repairs useanozzle lock-open device. • lffuelisspilled onclothing, change cloth- with the engine running. • Check grass catcher components and the ingimmediately. discharge chute frequently and replace • Never overfill fueltank. Replace gascap with manufacturer's recommended parts, andtighten securely. GENERAL SERVICE . • ° Never operate machine in aclosed area. Keep all nuts and bolts tightto be sure the equipment is in safe working condition. - • when necessary. Mowerblades are sharp. Wrapthe blade or wear gloves, and use extra caution when servicing them. Check brake operation frequently. Adjust and service as required. . Be alert and turn machine off if a child Maintain or replace safety and instruction enters the area. labels, as necessary. • Before and while backing, look behind • Be sure the area is clear of bystanders and down for small children. before operating. Stop machine if anyone enters the area. • Mow up and down slopes (15° Max), not across. • Never carry passengers. • Choose alow ground speed so that you • Do not mowin reverse unless absolutely will not have to stop or shift while on the necessary. Always look down and behind slope, before and while backing. • Avoid starting, stopping, or turning on a • Never carry children, even with the slope. Ifthetires Iosetraction, disengage blades shut off, They may fall off and ............ beseriouslyinjuredotinterfeCewithSa.fe ................... the blades and proceed slowly straight machine operation. Children who have down the slope. • If machine stops while going uphill, been given rides inthe past maysuddenly disengage blades, shift into reverse and appear in the mowing area for another back down slowly. ride and be run over or backed over by the machine. • Do not turn on slopes unless necessary, and then, turn slowly and gradually Keep children out of the mowing area and inthe watchful care of a responsible downhill, [f possible. ° When loading or unloading this machine, adult other than the operator. do not exceed the maximum recommended operation angle of 15°. • PRODUCT In the state of Californiathe above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws, Federal laws apply on federal lands. A spark arrestor for the muffler is ava ablethrough your nearest Sears service center (See REPAIR PARTS manual). SPECIFICATIONS Gasoline Capacity and type: 3.0 Gal_ons!t 1,35 L Regular Unleaded Oil Type; API: SG-SL) SAE30 (above 32°F/0°C SAE 5W30 (below 32_F/0°0 Oi} Capacity: Wl Fitter: W/out Filter: Spark Plug: Champion QC12YC (Gap: ,040"/1,02 ram) Charging System: 1S Amps @3600 RPM Battery: AmpiHr: Min, CCA: Case size: Blade Bolt Torque: 45-55 Ft. Lbs./62-75 54 Oz./1.95 L 80 Oz./1.77 L REPAIR PROTECTION AGREEMENTS Congratulations on making a smart purchase, Your new Craftsman@ product is designed and manufactured for years of dependable operation, But like all products, itmay require repair from timetotime, That's when having a Repair Protection Agreement can save you money and aggravation. Purchase a Repair Protection Agreement now and protect yourself from unexpected hassle and expense. 28 230 U1R Nm CONGRATULATIONS onyour purchase of a new tractor, It has been designed, engineered and manufacturedto giveyou the best possible dependability and performance. Should you experience any problem you cannot easily remedy, please contact a Sears or other qualified service center. We have competent, well-trained representatives and the proper tools to service or repair this tractor. Please read and retain this manual. The instructions will enable you to assemble and maintain your tractor properly. Always observe the 'SAFETY RULES". CUSTOMER Here's what's included in the Agreement: RESPONSIBILITIES ° Expert service byour 12,000 professionaI repair specialists. * Unlimited service and no charge for parts and labor on all covered repairs. • Product replacement if your covered product can't be fixed. , Discount of 10% from regular price of service and service-related parts not covered by the agreement; also, 10% off regular price of preventive maintenance check. • Read and observe the safety rules. , Follow a regular schedule in maintaining, • Fast help by phone - phone support caring for and using your tractor. from a Sears representative on products • Follow instructions under "Maintenance" requiring in-home repair, plus convenient and "Storage '_sections of this manual. repair scheduling. • Wear proper Personal Protective EquipOnce you purchase the Agreement, a simple ment (PPE) while operating this machine, phone call is allthat ittakes for youto schedincluding (at a minimum) sturdy footwear, ule seNice. Youcan call anytime day or night, eye protection, and hearing protection. or schedule a service appointment online. Do not mow in shorts and/or open toed footwear. Sears has over 12,000 professional repair -LAIways letsomeoneknowyouareoutside ............. specialists, who have access to over 4.5 .... million quality parts and accessories. That's mowing. the kind of professionalismyou can count on _,WARNING: This tractoris equipped with to help prolong the life of your new purchase an internal combustion engine and should for years to come. Purchase your Repair not be used on or near any unimproved Protection Agreement today! forest-covered, brush-covered or grassSome limitations and exclusions apply. covered land unless the engine's exhaust For prices and additional information call system is equipped with a spark arrestor 1-800-827-6655, meeting applicable local or state laws (if SEARS INSTALLATION SERVICE any), If a spark arrestor is used, it should be maintained in effective working order by For Sears professional installation of home the operator. appliances, garage door openers, water heaters, and other major home items, inthe U.S.A. call 1-800-4-MY-HOME@ 6 i iiiii 11, 11, Mower Mower i Front Wheel © (2) Rear __ O,D, Washers (5) 1-3/t6 Lift Link _} Assemblies _-_ (1) Shoulder Bolt (1) 1-1/40.D, Washer W (1) Small _@ Retainer Springs (1) Front Lift Link _\ Assembly "<_._ \_ (1) 3/s-16 (1) Wheel Locknut Retainer Springs 11,1, Slope Sheet If Equipped (1) Anti-Sway Bar Keys (1) 3/40,D, Washers (1) Small Retainer Springs *Installed by Dealer *BrushGuardKit ,,, (2) Keys i Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to ensure proper tightness. TOOLS REQUIRED FOR ASSEMBLY • Release lever to lock seat in position. A socket wrench set will make assembly easier. Standard wrench sizes are listed. (2) 7/16" wrenches Utility knife (1) 1/2" wrench (1) 3/4" wrench Tire pressure gauge Pliers (f) 3/4" socket w!drive ratchet (1) 9/16" wrench Flashlight When right or left hand is mentioned in this " manual, it means when you are in the operating position (seated behind the steering wheel). TO REMOVE CARTON UNPACK • • • • TRACTOR FROM CARTON Remove allaccessible loose parts and parts cartons from carton. Cut along dotted lines on all four panels of carton. Remove end panels and lay side panels flat. Remove mower and packing materials. Check for any additional loose parts or cartons and remove. BEFORE FROM REMOVING TRACTOR SKID TO CHECK BATTERY 1. Lift hood to raised position, NOTE: if this battery is put into service after month and year indicated on label (label is located between terminals) charge battery for minimum of one hour at 6-10 amps, (See "BATTERY" in Maintenance section of this manual for charging instructions). . • For battery & battery cable installation see .......................... "REPLACING BATI'ERY" in the "Service and Adjustments" section in this manual. Label TO ADJUST SEAT • Sit in seat. • Uft up adjustment lever (A) and slide seat until acomfortable position is reached which allows you to press clutch/brake pedal all the way down. NOTE: You may now roll your tractor off the skid. Follow the appropriate instruction below to remove the tractor from the skid. _, WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects. TO ROLL Operation TRACTOR section OFF SKID for location (See and function of controls) 1. Raise attachment lift lever to its highest position. 2. Release parking brake bydepressing brake pedal. 3. Place freewheel control in disengaged position to disengage transmission (See "TO TRANSPORT" in the Operation section of this manual). 4. Roll trastorforward off skid. Continue with the instructions that follow. TO INSTALL MOWER 1. SET PARKING BRAKE LEVER AND LOWER ATTACHMENT LIFT LEVER :Depress clutch!brake Pedal all the way....... down and hold. * Pullparkingbrake]everupandhold, release pressure from clutch/brake pedal, then release parking brake lever. Pedal should remain in brake position. Ensure parking brake will hold tractor secure. _CAUTION: Lift lever is spring loaded, Have a tightgrip on lift lever, lower it slowly and engage in lowest position, Lift lever is located on left side of fender, 3. TURN STEERING WHEEL LEFT AND POSITION MOWER * Turn steering wheel to the left as far as it willgo and position mower on rightside of tractorwith deflectorshield (Q)tothe right, Lift Lever 2, ASSEMBLE Front FRONT (W) TO FRONT GAUGE WHEEL OF MOWER Transaxle Q. Deflector Shield H. W. X. Y. Z. A. B. C. D. E, E H. Front Mower Bracket Front Gauge Wheel Shoulder Bolt 1-1/40.D. Washer 318-16 Locknut 4. SLIDE MOWER UNDER TRACTOR • Bring beltforwardand check beltforproper routing in all mower pulley grooves. NOTE: Be sure mower side suspension arms (A) are pointing forward before sliding mower under tractor. ° Slide mower under tractor until it is centered under tractor. Mower Side Suspension Arms Retainer Spring Rear Lift Link(S) Right Side Rear Mower Bracket Front Lift Link Assembly Front Suspension Bracket Front Mower Bracket I. K. L M. Q. S. W, Left Side Rear Mower Bracket Belt Tension Rod Locking Bracket Engine Clutch Pulley Deflector Shield Anti-Sway Bar Front Gauge Wheel • • Pivot the integrated washer end of antisway bar IS)towards mower deck bracket on right side of mower. Insert integrated washer end of bar into hole inrear mower bracket (D), Move mower as needed to insert integrated washer end of bar into rear mower bracket (D). Secure with small washer and small retainer spring as shown, A. MowerSide SusaensionArms Q, DeflectorShield 5. INSTALL ANTI-SWAY BAR IS) (IF EQUIPPED) _ ANTI-SWAY Towards Transaxle 90° End • BAR IS) Towards Mower Deck _1_ D. Right SideRear MowerBracket S. Anti-SwayBar T TransaxleBracket IntegratedWasherEnd l" From right side of mower, first insert 90 ° end of anti-sway bar IS) into hole in transaxle bracket IT), located near Ieft rear tire in front of transaxle. NOTE: Flashlight may be helpful. Anti-Sway Bar IS) Location,,, _'t i_ .............. r 6, ATTACH MOWER SIDE SUSPENSION ARMS (A) TO CHASSIS • Positionfront hole inside suspension arm (A) over pin on outside of tractor chassis and secure with large washer and large retainer spring (B), • Repeat on opposite side of tractor. f) _x,,_y..................",, U'! i I_ \ 7. ATTACH REAR LIFT LINKS (C) Insert rod end of rear lift link (C) into hole (U) in tractor lift shaft suspension arm and pivot link down to mower. Liftrear corner of mower and position slot in link assembly over pin on rear mower bracket (D) andsecure with large washer and large retainer spring. • Repeat on opposite side of tractor, NOTE: Depending on model, bracket (_ may be differentthan shown but hole for anti-sway bar will be in same position/location, 10 9 ° - 8 • ATTACH FRONT LINK (E) ]3Jrn steering wheel to position wheels straight forward. • From front of tractor, insert rod end of front link (E) through front hole in tractor front suspension bracket (F). • Movetoleftsideofmower andand insert large retainer spring (G) through hole in front link (E) behind front suspension bracket (F). Insert other end of link (E) into hole in front mower bracket (H) and secure with washer and smalt retainer spring (J). NOTE: Requires deck lifting. Front Unk i INSTALL BELT ON ENGINE CLUTCH PULLEY (M) Disengage belt tension rod (K) from locking bracket (L). Install bettonto engine clutch pulley (M). M.Engine Clutch Pulley IMPORTANT: Check belt for proper routing in all mower pulley grooves and under mandrel covers. • Engage belt tension rod (K) on locking bracket (L). _ICAUT!ON: Belt tension rod is spring foaded. Have atight grip on rod and engage slowly. • Raise attachment lift lever to highest position. • If necessary, adjust gauge wheels before operating mower as shown inthe Operation section of this manual. MOWER DRIVE BELT INSTALLATION Follow procedure described in "TO REPLACE MOWER BLADE DRIVE BELT" in the "Service and Adjustments" section of this manual. ._..... ' / .......... "\ 1! CHECK TIRE PRESSURE The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for 6est cutting performance. o Reduce tire pressure to PSI shown on tires. _CHECKLIST Before you operate your new tractor, we wish to assure that you receive the best performance and satisfaction from this Quality Product, Please review the following checklist: d" All assembly instructions have been completed. J" No remaining loose parts in carton. J" Battery is properly prepared and charged, J Seat is adjusted comfortably and tightened securely. J All tires are properly inflated. (For shipping purposes, the tires were overinflated at the factory). v/ Be sure mower deck is properly leveled side-to-side/front-to-rear for best cutting results. (Tires must be properly inflated for leveling). J Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers. vt Check wiring. See that all connections are still secure and wires are properly clamped, _" Before driving tractor, be sure freewheel control is in"transmission engaged" position (see "To Transport" in the Operation section of this manual). CHECK DECK LEVELNESS For best cutting results, mower housing should be properly leveled. See "TO LEVEL MOWER" in the Service and Adjustments section of this manual. CHECK FOR PROPER OF ALL BELTS POSITION See the figures that are shown for replacing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly. CHECK BRAKE SYSTEM After you learn how to operate your tractor, check to see that the brake is operating properly, See "TO CHECK BRAKE" in the Service and Adjustments section of this manual. While learning howto use your tractor, pay extra attention to the following important items: J" Engine oil is at proper level, v/ Fueltank is filledwith fresh, clean, regular unleaded gasoline. !/" Become familiar with all controls, their location and function. Operate them before you start the eng!_ne_ ............................... -Z-Besure brake sys:temiS insafe operating condition, Be sure Operator Presence System and Reverse Operation System (ROS) are working properly (See the Operation and Maintenance sections in this manual). d" it is important to purge the transmission before operating your tractor for the first time. Follow proper starting and transmission purging instructions (See "TO START ENGINE" and "PURGE TRANSMISSION" in the Operation section ofthis manual). 12 These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. R N REVERSE H NEUTRAL I'-.! L HIGH LOW CHOKE SLOW FAST lnNmON i.mt ENGINE OFF LIGHTS ON REVERSE OPERATION SYSTEM (ROS) FUEL ATTACHMENT CLUTCH DISENGAGED ENGINE BATTERY ON ENGINE REVERSE ATTACHMENT CLUTCH ENGAGED START PARKING FORWARD DANGER, KEEP HANDS AND FEET AWAY BRAKE CRUISE KEEP MOWER HEIGHT CLEAR (SEE SAFETY MOWER LIFT CLUTCWBRAKE PEDAL CONTROL AREA SWITCH SLOPE RULES HAZARDS SECTION) DANGER will result indicates in death aorhazard seriouswhich, injury,if not avoided, FREE WHEEL (Automatts Models only) WARNING hazard which, if not avoided, could resultindicates in deatha or serious injury. CAUTION indicates a hazard which, injury. if not avoided, might result in minor or moderate CAUTION when used without the alert Symbol, indicates a situation that could result in damage to the tractor and/or engine. Failure to follow instructions could result in serious injury or death. The safety alert symbol is used to identify safety information about hazards which can result in death, serious injury and!or oroDertv damaae. HOT SURFACES indicates a hazard which, ,,_,_,_., if not avoided, could result in death, serious injury •""'-" and/or property damage. _'_.41_'J. FIRE indicates e hazard which, if not avoided, could result in death, serious injury and/or property damage, 13 KNOWYOURTRACTOR READ THISMANUAL ANDSAFETY RULES BEFORE OPERATING YOUR TRAC- TOR Compare the illustrations with your tractor to familiarize yourself with the locationsof various controls and adjustments. Save this manual for future reference. Our tractors conform to the applicable safety standards of the American Natfonal Standards Institute, (A) ATTACHMENT LIFT LEVER - Used to rafse and lower the mower or other attach- (H) LIGHT SWITCH - "SJrns the headlights on and off. ments mounted to your tractor. (J) CRUISE CONTROL LEVER - Used to (B) BRAKE PEDAL- Used for braking the set forward movement of tractor at desired tracto[_and=sta_t!_gthe engir)e. .................................. speed without ho!ding the forward _driye pedal, (C) PARKING BRAKE- Locksclutch/brake pedal intothe brake position. (K) FORWARD DRIVE PEDAL - Used for forward movement of tractor. (D) THROTTLE/CHOKE CONTROL- Used for starting and controlling engine speed. (L) REVERSE DRIVE PEDAL- Used for reverse movement oftractor, (E) ATTACHMENT CLUTCH SWITCH - Usedto engagethe mower blades, or other attachments mounted to your tractor. (M) FREEWHEEL CONTROL- Disengages transmission for pushing or slowly towing the tractor with the engine off. (F) IGNITION SWITCH - Used for starting and stopping the engine. (P) SERVICE REMINDER/HOUR METER - indicates when service is required for the engine and mower. (G) REVERSE OPERATION SYSTEM (ROS) "ON" POSITION - Allows operation ofmowerorother 3owered attachment while in reverse, 14 ii The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage, Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs, We recommend standard safety glasses or a ............... w!de vision safety mask worn over spectacles. ..... HOW TO USE YOUR TRACTOR TO SET PARKING BRAKE Your tractor is equipped with an operator presence sensing switch. When engine is running, any attempt bythe operatorto leave the seat without first setting the parking brake will shut off the engine. 1. Depress brake pedal (B)alltheway down and hold. 2, Pull parking brake lever (C) up and hold, release pressure from brake pedal (B), then release parking brake lever. Pedal should remain in brake position. Make sure parkingbrake will holdtractorsecure, I I | I I NOTE: Failure to move throttle control between haft and full speed (fast) position, before stopping, may cause engine to "backfire". o Turn ignition key (F) to "STOP" position and remove key. Always remove keywhen leaving tractor to prevent unauthorized use. • Never use choke to stop engine. IMPORTANT: Leaving the ignitionswitch in any position other than "STOP" will cause the battery to discharge and go dead. NOTE: Undercertain conditionswhentractor is standing idle with the engine running, hot engine exhaust gases may cause "browning" of grass. To eliminate this possibility, always stop engine when stopping tractor on grass areas. _JLCAUTION: Always stop tractor completely, as described above, before leaving the operator's position. STOPPING MOWER BLADES • To stop mower blades, push attachment clutch switch into disengaged position (O). (I) Attachment Clutch Switch Pull Out To "Engage" TO USE THROTTLE CONTROL (D) Always operate engine at full speed (fast). • Operating engine at less than fult speed (fast) reduces engine's operating efficiency, • Full speed (fast) offers the best mower performance. (O) Push-In to "Disengaged" STOPPING GROUND DRIVE • Tostop ground drive, depress brake pedal all the way down. ENGINE • Move throttle control (D) between half and full speed (fast) position. 15 TO MOVE FORWARD AND BACKWARD The direction and speed of movement is controlled by the forward and reverse drive pedals. 1. Start tractor and release parking brake. 2. Slowly depress forward (K) or reverse(L) drive pedal to begin movement, Ground speed increases the further down the pedal is depressed. TO USE CRUISE CONTROL The cruise control feature can be used for forward travel only, SYSTEM CHARACTERISTICS The cruise control should only be used while mowing or transporting on relatively smooth, straight surfaces. Other conditions such astrimming at stow speeds may cause the cruise control to disengage. Do not use the cruise control on slopes, rough tertian or while trimmimg or turning. • With forward drive pedal depressed to desired speed, pull cruise control lever (J) up and hold while lifting your foot off the pedal, then release the lever. Todisengage the cruise control, depress the brake pedal, tap on forward drive pedal or push the cruise control tever down, TO ADJUST MOWER CUTTING HEIGHT The position of the attachment lift lever (A) determines the cutting height. The cutting height range isapproximately 1" to 4". The heights are measured from the ground tothe bladetip withthe engine not running.These heights are approximate and may vary depending uponsoil conditions, height of grass and types of grass being mowed, • The average lawn should be cut to approximately 2-t/2" during the cool season and to over 3" during hot months. For healthier and better looking lawns, mow Often and after moderate growth. • For best cutting performance, grass over 6 inches in height should be mowed twice, Make the first cut relatively high; the second to desired height. TO ADJUST GAUGE WHEELS Gauge wheels are properly adjusted when they are slightly offthe ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions, NOTE: Adjust gauge wheels with tractor on a flat level surface. 1, Adjust mower to desired cutting height (See "TO ADJUST MOWER CUTTING HEIGHT" in this section of manual). 2. With mower indesired height of cut position, gauge wheels should be assembled so they are slightly offthe ground, Install gauge wheel inappropriatehole, Tighten securely. 3. Repeat for all, installing gauge wheel in same adjustment hole. TO OPERATE MOWER Your tractor is equipped with an operator presence sensing switch. Any attempt bythe operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine. You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting offwhen operating your equipment on rough, rolling terrain or hills. I. Select desired height of cut with attachment lift lever, 2. Start mower blades by engaging attachment clutch control, . Put attachment liftlever in desired cutting height slot. 16 TO STOP MOWER BLADES • Disengage attachment clutch control. _CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, orthe deflector shield (S) in place. REVERSE OPERATION SYSTEM (ROS) Your tractor is equipped with a Reverse Operation System (ROS). Any attempt by the operator to travel in the reverse direction withthe attachment clutch engaged willshut off the engine unless ignition key is placed in the ROS "ON" position. TO OPERATE ON HILLS _WARNING: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope, Use the slope guide provided at the back of this manual, • Choose the slowest speed before starting up or down hills. . Avoidstopping or changingspeed on hills. • If stopping is absolutely necessary, push brake pedal quickly to brake position and engage parking brake. o Torestart movement, slowlyrelease parking brake and brake pedal. • Slowly depress appropriate drive pedal to slowest setting. • Make all turns slowly. TO TRANSPORT When pushing or towing your tractor, be sure to disengage transmission by placing freewheel control in freewheeling position. Free wheel control is located at the rear drawbar of tractor. • Raise attachment lift to highest position with attachment lift control, • Pul! freewheel control out and into the slot and release so it is held inthe disengaged position. . Do not push or tow tractor at more than two (2) MPH. • To reengage transmission, reverse above procedure_ _WARNING: Backing up with the attachment clutch engaged while mowing is strongly discouraged. Turning the ROS "ON", to allow reverse operation with the attachment clutch engaged, should only be done when the operator decides it is necessary to reposition the machine with the attachment engaged, Do not mow in reverse unless absolutely necessary, USING THE REVERSE OPERATION SYSTEM Only use if you are certain no children or other bystanders willenter the mowing area. 1. Depress brake pedal all the way down, 2, With engine running, turn ignition key counterclockwise to ROS "ON" position. 3. Look down and behind before and NOTE: To protect hood from damagewhen transporting yourtractor on atruck or atrailer, while backing, -4,-Slowly depress reverse drive peda{ to.................. besure hood isclosed andsecuredtotractor, ..... Use an appropriate means of tying hood to start movement. 5. When use of the ROS is no longer tractor (rope, cord, etc.). needed, turn the ignition key clockwise TOWING CARTS AND OTHER ATTACHto engine "ON" position. MENTS ROS "ON" Position Tow only the attachments that are recommended by and comply with specifications of the man_acturer of your tractor, Use common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor. Engine "ON" Position (Normal Operaling} 17 SERVICE REMINDER/HOUR METER Service reminder shows the total number of hours the engine has run and indicates when the engine or mower needs servicing. After every 50 hours of operation the oil can icon will stay on for 2 hours or until a manual reset occurs. To reset the display manually turn the ignition switch to the on position, then the off position five times (! second on, 1 second off). To service engine and mower, seethe Maintenance section of this manual• Note: Service reminder runs when the ignition key is in any position but "STOP", For accurate reading, be sure key remains in the "STOP" position when engine is not running, BEFORE STARTING THE ENGINE CHECK ENGINE OIL LEVEL The engine in your tractor has been shipped, from the factory, already filled with summer weight oil, t. Check engine oil with tractor on level ground. 2. Remove oil fill cap/dipstick and wipe clean, reinsert the dipstick and screw cap tight, wait for a few seconds, remove and read oil level. If necessary, add oil until "FULE' mark on dipstick is reached. Do not overfill, * For cold weather operation you should change oil for easier starting (See the oil viscosity chart in the Maintenance section of this manual). . To change engine oil, see the Maintenance section in this manual. - Fill fuel tank to bottom of filler neck. Do not overfill. Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane. (Use of leaded gasoline will increase carbon and lead oxide deposits and reduce valve life). Do not mix oil with gasoline. Purchase fuel in quanti............................................................. ties tf_at can 5e used witRln 30 _ays to assure fuel freshness. CAUTION: Wipe off any spilled oil or • Do not store, spill or use gasoline near an open flame, IMPORTANT: When operating in temperatures below 32°F(0°C), use fresh, clean winter grade gasoline to help insure good cold weather starting. I8 CAUTION: Alcohol blended fuels (called gasoho[ or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage, To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See Storage instructions for additional information. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur. TO START ENGINE When starting the engine for the first time or if the engine has run out of fuel, it will take extra cranking time to move fuel from the tank to the engine. 1. Be sure freewheel control is in the transmission engaged position. 2. Sit on seat in operating position, depress brake pedal and set parking brake. 3. Move attachment clutch to disengaged position. 4. Move throttle control to choke position. NOTE: Before starting, read the warm and cold starting procedures below, 5, Insert key into ignition and turn key clockwise to start position and release key as soon as engine starts. Do not run starter continuously for more than fifteen seconds per minute. If the engine does not start after several attempts, move throttle control to fast position, wait a few minutes and try again. If engine still does not start, move the throttle control back to the choke position and retry. WARM WEATHER STARTING (50 FI( ....................................... 0 C) and above) 6. When engine starts, move the throttle control to the fast position. • The attachments and ground drive can now be used. tf the engine does not accept the load, restart the engine and allow it to warm up for one minute using the choke as described above. COLD WEATHER STARTING (50°F(10°C) and below) 6. When engine starts, leave throttle control in choke position until engine warms up and begins to run roughly. Once rough running begins, immediately move the throttle control to the fast position. Engine warm-up may take from several seconds to several minutes (the colder the temperature, the longer the warm-up). AUTOMATIC TRANSMISSION WARM UP Before driving the unit in cold weather, the transmission should be warmed up as follows: 1. Be sure the tractor is on level ground. 2. Release the parking brake and let the brake slowly return to operating position. 3. Allow one minute for transmission to warm up. This can be done during the engine warm up period. The attachments can also be used during the engine warm-up period after the transmission has been warmed up. NOTE: Ifata high altitude (above 3000 feet) or in cold temperatures (below 32°F(0°C)) the carburetor fuel mixture may need to be adjusted for best engine performance (see "TO ADJUST CARBURETOR" inthe Service and Adjustments section of this manual). PURGE TRANSMISSION _ILCAUTION: Never engage or disengage freewheel lever while the engine is running. Toensure proper operation and performance, it is recommended that the transmission be purged before operating tractor for the first time. This procedure will remove anytrapped air inside the transmission which may have developed during shipping of your tractor. IMPORTANT: Should your transmission require removal for service or replacement, it should be purged after reinstallation before operating the tractor. 1, Place tractor safely on a level surface that is clear of objects and open - with engine off and parking brake set. 2. Disengage transmission by placing freewheel control in disengaged position (See "TO TRANSPORT" in this section of manual). 3. Sitting in the tractor seat, start engine. After the engine isrunning, move throttle control to slow position. Disengage parking brake. ,_CAUTION: At any time, during step 4, there may be movement of the drive wheels. 4. Depress forward drive pedal to full forward position and hold forfive (5)seconds and release pedal. Depress reverse drive pedal to full reverse position and hold for five (5) seconds and release pedal. Repeat this procedure three (3) times. 5. Shutoff engine and set parking brake. 6. Engage transmission by placing freewheel control in engaged position (See "TO TRANSPORT" in this section of manual). 7. Sitting in the tractor seat, start engine. After the engine isrunning, move throttle control to haft (i/2) speed. Disengage ........parking brake; ................................................... ........................... 8. Drive tractor forward for approximately five feet then backwards for five feet. Repeat this driving procedure three times. Your transmission is now purged and now ready for normal operation. 19 MOWING TIPS - Tire chains cannot be used when the mower housing is attached to tractor. • Mower should be properly leveled for best mowing performance. See "TO LEVEL MOWER HOUSING" in the Service and Adjustments section of this manual. • The left hand side of mower should be used for trimming. • Drive sothat clippings are discharged onto the area that has already been cut, Have the cut areato the right ofthetractor. This will result in a more even distribution of clippings and more uniform cutting. • When mowing large areas, start byturning to the right so that clippings will discharge away from shrubs, fences, driveways, etc. After one or two rounds, mow inthe opposite direction making left hand turns until finished. • If grass is extremely tall, it should be mowed twice to reduce load and possible fire hazard from dried clippings. Make first cut relatively high; the second to the desired height. . Do not mow grass when it is wet. Wet grass will plug mower and leave undesirable clumps. Allow grass to dry before mowing, • Always operate engine at full throttle when mowing to assure better mowing performance and proper discharge --of material: Regulate ground speedby selecting a low enough speed to give the mower cutting performance as welt asthe quality of cut desired. • When operating attachments, select a ground speed that will suit the terrain and give best performance of the attachment being used. 20 MAINT E NANCE SCHEDULE T A C ,,,,,, I_ACH ii Operation Check Brake Check T_te Pressure ==Pc.= _sRv use .ou.s iV V B ' V _ If eveRY _Rv _VERV _V_RY e_OnE .OURS .OUAS .OURS 25 50 tO0 nl SEASON STORAGe ii Check Op"rator Presence & ROS Systems Check for Loose,,Fasteners i Check/Replace Mower Blades _ .... ' T Lubrication Chart If 0 Check 1_4 R Clean Battery and Terminals Batte_ Level Transe×le Check Mower Check V-BsII_ Chae_e .... V" , 0[I Engine Change Level OIl (with Cleric Air G C_een Air Screen I Inspect N Replace oiI filter) E Clean eli filter) FiIter I If , I If ..... L*_'t,2 _i.2 V_ ' If V';_ Filter En,gine , _ Muffler/Spark eli HH If En_llne Oil (without Arrester (If equipped) Cooling Replace Spark Replace Air" Filter ReDIace Ik/s Co,cling LeveIness ChEeck Engine If Ik/ Clean Debris Off Steering Plate Check If , _'s Plug _ .... Fins {k #12 , If Paper Carlridge FueI Pi_ter " ...... ,, V" , _;_ If ,, LUBRICATION CHART GENERAL RECOMMENDATIONS The warranty on thistractordoes notcover (_Steering Pivot BoIts items that have been subjected to operator abuse or negligence. To receive full value (_ Spindle Zerk from the warranty, operator must maintain Zerk tractor as instructedin this manual. Front Wheel Some adjustments will need to be made peBearing Zerk riodically to properly maintain your tractor. Wheel At least once a season, check to see if Bearing Zerk you should make any of the adjustments Engine described in the Service and Adjustments _)Steerir 7secti6n ofthismanual: .................................................................................................. Sector............. I • At least once a year you should replace Gear the spark plug, clean or replace air filter, Teeth Mandrel and check blades and belts for wear. A Zerks new spark plug and clean air filter assure proper air-fuel mixture and help your en(_General Purpose Grease gine run better and last longer, (_Refer to Maintenance "ENGINE" Section. BEFORE EACH USE IMPORTANT: Do notoilor greasethe pivot 1. Check engine oil level. points which have special nylon bearings. 2. Check brake operation. Viscous lubricants wilt attract dust and dirt 3. Check tire pressure. that will shorten the life of the self-lubricating 4, Check operator presence and bearings. Ifyou feel they must be lubricated, ROS systems for proper operation. use only a dry, powdered graphite type 5. Check for loose fasteners. lubricantsparingly. 21 TRACTOR CHECK REVERSE OPERATION (ROS) SYSTEM Always observe safety rules when per_ forming any maintenance. • When the engine is running with the BRAKE OPERATION ignitionswitch in the engine "ON" position and the attachment clutch engaged, If tractor requires more than five (6) feet to any attempt by the operator to shift into stop at highest speed in highest gear on a reverse should shut off the engine. level, dry concrete or paved surface, then • When the engine is running with the brake must be serviced, (See "TO CHECK ignition switch in the ROS "ON" position BRAKE" in the Service and Adjustments and the attachment clutch engaged, section of this manual). any attempt by the operator to shift into TIRES reverse should NOT shut off the engine. • Maintain proper air pressure in all tires BLADE CARE (See PSi on tires). For best results mower blades must be • Keep tires free of gasoline, oil, or insect control chemicals which can harm rubsharp. Replace worn, bent or damaged blades. ber, _k CAUTION: Use only a replacement • Avoid stumps, stones, deep ruts, sharp blade approved by the manufacturer of objects and other hazards that may your tractor. Using a blade notapproved cause tire damage. bythe manufacturer of yourtractor is NOTE: To seal tire punctures and prevent hazardous, could damage your tractor and flat tires due to slow leaks, tire sealant void your warranty. may be purchased from your local parts dealer. Tire sealant also prevents tire dry BLADE REMOVAL rot and corrosion. 1. Raise mower tohighest positionto allow OPERATOR PRESENCE SYSTEM AND access to blades. REVERSE OPERATION SYSTEM (ROS) NOTE: Protect your hands with gloves and/ or wrap blade with heavy cloth. Be sure operator presence and reverse 2. Remove blade bolt by turning counteroperation systems are working properly. If clockwise. your tractor does not function as de3. lnstalt newbladewithstamped"THISSIDE scribed, repair the problem immediately. UP" facing deck and mandrel assembly. • The engine should not start unless the IMPORTANT: To ensure proper assembly, brake pedal is fully depressed, and the attachment clutch control is in tfie center hole in blade must align with star on disengaged position. mandrel assembly. 4. Install and tighten blade bolt securely CHECK OPERATOR PRESENCE (45-55 Ft, Lbs. torque), SYSTEM IMPORTANT: Special blade bolt is heat • When the engine is running, any attreated. Mandrel tempt by the operator to leave the seat Assembly withoutfirst setting the parking brake / should shut off the engine. BIade __i • When the engine is running and the ¢--__ _._x attachment clutch is engaged, any atBlade8eltL--_._ _,_'_-/_))_ tempt by the operatortoleavethe seat ........................ (spe,_ial)_ ',-_'_-q. _. 6--_ I......... should shut off the engine, ""_,_4_" ,-_. "_s,a, • The attachment clutch should never op_ ._ .[ "._'%.._,'_ erate unless the operator is in the seat. _Jenler Hole "_& BATTERY ROS"ON" Position Engine"ON" Position (NormalOperating) Your tractorhas a battery charging system which is sufficient for normal use. However, periodic charging of the battery with an automotive charger will extend its life. • Keep battery and terminals clean. • Keep battery bolts tight. ° Keep small vent holes open. • Recharge at 6-10 amperes for 1 hour. 22 NOTE: Although multi-viscosity oils NOTE: The original equipment battery on your tractor is maintenance free, Do not (5W30, 10W30 etc.) improve starting in cold weather, they will result in increased attempt to open or remove caps or covers. oil consumption when used above 32°E Adding or checking level of electrolyte is Check your engine oil level more frequentnot necessary. TO CLEAN BATTERY AND TERMINALS ly to avoid possible engine damage from running low on oil. Corrosion and dirt on the battery and terminals can cause the battery to "leak" power. Change the oil after every 50 hours of operation or at least once a year ff the tractor 1. Remove terminal guard. is not used for 50 hours in one year. 2. Disconnect BLACK battery cable first Check the crankcase oil level before then RED battery cable and remove starting the engine and after each eight battery from tractor. 3. Rinsethe batterywith plain waterand dry. (8) hours of operation. Tighten oil fill cap/ dipstick securely each time you check the 4. Clean terminals and battery cable ends oii level. with wire brush until bright. 5. Coat terminafs with grease or petroleum TO CHANGE ENGINE OIL jelly. Determine temperature range expected 6. Reinstall battery (See "REPLACING before oil change, All oil must meet API BATTERY" in the SERVICE AND ADservice classification SG-SL, JUSTMENTS section of this manual). * Be sure tractor is on level surface, TRANSAXLE MAINTENANCE - Oil will drain more freely when warm. Thetransmission fan and cooling fins should be kept clean to assure proper cooling. Do ° Catch oil in a suitable container. not attemptto clean fan or transmission while 1. Remove oil fill cap/dipstick, Be careful engine is running or while the transmission notto allow dirt to enter the engine when is hot, Toprevent possible damage to seals, changing oil. do not use high pressure water or steam to 2, Slide oi!drain extension fromthe decking clean transaxle, position on the engine blower housing • Inspect cooling fan to be sure fan blades and extend outward from engine. are intact and clean. • Inspectcoolingfins for dirt, grass clippings Docking Oil Drain and other materials. Topreventdamageto sition seals, do not use compressed air or high pressure sprayer to clean cooling fins, TRANSAXLE PUMP FLUID The transaxle was sealed atthe factory and fluid maintenance is not required for the life of the transaxfe, Should the transaxle ever leak or require servicing, contact your nearest Sears or other qualified service center. V-BELTS Check V-belts for deterioration and wear after 3. To open, twist cap counter-clockwise t00 hours of operation and replace !.................... ff neces" ........ ........................................... '...................................... 4, .After oil is drained-completely, replace..... san/. The belts are not adjustable. Replace cap and twist clockwise until it stops. belts if they begin to slip from wear. 5. Re-attach oil drain extension to engine ENGINE blower housing. LUBRICATION 6, Refill engine with oilthrough oil fill dipstick Only use high quality detergent oil rated tube. Pour slowly, Do not overfill, For apwith APi service classification SG.SL, proximate capacity see "PRODUCT SPSelect the oil's SAE viscosity grade ECIFICATIONS" section of this manual. according to your expected operating 7. Use gauge on oil fill cap/dipstick for temperature. checking level. For accurate reading, tighten dipstick cap securely onto the tube before removing dipstick. Keep oil at "FULL:' line on dipstick, Tighten cap onto the tube securely when finished. " 23 ENGINE OIL FILTER Replace the engine oil filter every season or every other oil change if the tractor is used more than 100 hours in one year, AIR FILTER Your engine will not run properly using a dirty airfilter. Clean the foam pre-cleaner after every 25 hours of operation or every season. Service paper cartridge every 1O0 hours of operation or every season, whichever occurs first. Service air cleaner more often under dusty conditions. 1. Remove cover. TO SERVICE PRE-CLEANER 2. Wash it in liquid detergent and water. 3. Squeeze it dry in a clean cloth, 4. Saturate it in engine oil Wrap it in clean, absorbent cloth and squeeze to remove excess oil. NOTE: If very dirty" or damaged, replace pre-cleaner. TO SERVICE CARTRIDGE 1, Clean cartridge by tapping gently on flat surface. If very dirty or damaged, replace cartridge, 2. Reinstall precleaner cartridge, cover and secure. IMPORTANT: Petroleum solvents, such as kerosene, are not to be used to clean the cartridge. They may cause deterioration of the cartridge. Do not oil cartridge, Do not use pressurized airto clean or dry cartridge. _ CLEAN AIR SCREEN Air screen must be kept free of dirt and chaff to prevent engine damage from overheating. Clean with awire brush or compressed air to remove dirt and stubborn dried gum fibers. CLEAN AIR INTAKE/COOLING AREAS To ensure proper cooling, make sure the grass screen, cooling fins, and other external surfaces of the engine are kept clean at all times. Every 100 hours of operation (more often under extremely dusty, dirty conditions), remove the blower housing and othercooling shrouds. Clean the cooling fins and external surfaces as necessary. Make sure the cooling shrouds are reinstalled. NOTE: Operating the engine with ablocked grass screen, dirty or plugged cooling fins, and/or cooling shrouds removed will cause engine damage due to overheating. MUFFLER Inspect and replace corroded muffler and spark arrester (if equipped) as it could create a fire hazard and/or damage, SPARK PLUG(S) Replace spark plug(s) at the beginning of each mowing season or after every 100 hours of operation, whichever occurs first. Spark plug type and gap setting are shown in "PRODUCT SPECIFICATIONS" section of this manual. IN-LINE FUEL FILTER The fuel filter should be replaced once each season. If fuel filter becomes clogged, obstructing fuel flew to carburetor, replacement is required. 1. With engine cool, remove filter and plug fuel line sections. 2. Place newfuelfilter in position in fuel line with arrow pointing towards carburetor. 3. Be sure there are no fuel line leaks and .......... _la_psai"eprbpe_ly _pSsitiSi_ed....................... 4, tmmediatelywipe up anyspilled gasoline. jOartridge Fuel Filter -------__ Foam _ I PreoC[eaner_f_ 24 CLEANING • Clean engine, battery, seat, finish, etc, of all foreign matter. • Clean debris from steering plate. Debris can restrict clutch/brake pedal shaft movement, causing belt slip and loss of drive. Nozzle Washout Por_ A CAUTION: Avoid all pinch points and movable parts Clutch/brake pedal Clean IMPORTANT: Tug hose ensuring connection is secure. 5. Turn the water on. 6. While sitting in the operator's position Steering on the tractor, re-start the engine and place the throttle lever in the Fast "._y" position. CAUTION: IMPORTANT: Recheck the area making Steering System, Dash, _& Pinch certain the area is clear. Fender and Mower Not Shown _ Points 7. Move the tractor's attachment clutch control to the "ENGAGED" position. • Keep finished surfaces and wheels Remain in the operator's position free of all gasoline, oil, etc. with the cutting deck engaged until the • Protect painted surfaces with automodeck is cleaned. tive type wax. 8. Move the tractor's attachment clutch We do not recommend using a garden hose control to the "DISENGAGED" posior pressure washer to clean your tractor tion. Turn the ignition key to the STOP unless the engine and transmission are position to turn the tractor's engine off. covered to keep water out. Water in engine Turn the water off. or transmission will shorten the useful life of your tractor. Use compressed air or a leaf 9. Pull back the lock collar of the nozzle blower to remove grass, leaves and trash adapter to disconnect the adapter from from tractor and mower. the nozzle washout port. DECK WASHOUT PORT t0. Move the tractor to a dry area, preferably a concrete or paved area. Place Your tractor's deck is equipped with a the attachment clutch control in the washout port on its surface as part of its "ENGAGED" position to remove excess deck wash system, tt should be utilized afwater and to help dry before putting the ter each use. tractor away. 1. Drive the tractor to a level, clear spot _WARNING: A brokenor missingwashout on your lawn, near enough to a water ................ spigot=foryourgarden hose =toreach ............ fltting_could=expose..you=.or other.s.to_thrownu IMPORTANT: Make certain the tractor's objects from contactwith the blade. discharge chute is directed AWAYfromyour • Replacebrokenor missing washoutfiffing house, garage, parked cars, etc. Remove immediately,priorto usingmoweragain. bagger chute or mulch cover if attached. • Plug any holes in mower with bolts and Iocknuts. 2. Make sure the attachment clutch control is in the "DISENGAGED" position, set the parking brake, and stop the engine. 3. Thread the nozzle adapter (packaged with your tractor's Operator's Manual) onto the end of your garden hose. 4. Pull back the lock collar of the nozzle adapter and push the adapter onto the deck washout port atthe [eft end of the mower deck. Release the lock collar to lock the adapter on the nozzle. 25 ,_ 1. 3. 4. 5, 6, WARNtNG: TO AVOIDSERIOUSINJURY,BEFOREPERFORMINGANY SERVICEOR ADJUSTMENTS: Depress clutch/brake pedal fully and set parking brake. Place attachment clutch in "DISENGAGED" position. Turn ignition key to "STOP" and remove key. Make sure the blades and all moving parts have completely stopped, Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug, TO REMOVE MOWER t. Place attachment clutch in "DISENGAGED" position, 2, Lower attachment lift to lowestposition, 3. Disengage belttension rod (K) from lock bracket (L), • ILCAUTION: Rod is spring loaded. Have a tight grip on rod and release slowly, 4, Remove mower belt from electric clutch pulIey (M). 5. Disconnect front link (E) from mower remove retainer spring and washer, 6, Go to either side of mower and disconnect mower suspension arm (A) from chassis and rear lift link (C) from rear mower bracket (D) - remove retainer springs and washers. 26 7. Go to other side of mower and disconnect the suspension arm and rear lift link. _tk CAUTION: After rear lift links are disconnected, the attachment liftleverwitI be spring loaded. Have a tight grip on lift lever when changing position of the lever, 8, From right side of mower, disconnect anti-sway bar (S) from right rear mower bracket (D) - remove retainerspring and washer and pull mower toward you until the bar falls from the hole in bracket. 9. Turn tractor steering wheel to the left as far as it will go, 10. Slide mower out from under right side of tractor. TO INSTALL MOWER Follow procedure described in"TO INSTALL MOWER" in the Assembly section of this manual. TO LEVEL MOWER Make sure tires are properly inflated to the PSi shown on tires. Iftires are over or under inflated, it may affect the appearance of your lawn and lead you to think the mower is not adjusted properly. VISUAL SIDE-TO-SIDE ADJUSTMENT 1. With all tires properly inflated and ifyour lawn appears unevenly cut, determine which side of mower is cutting lower, NOTE: As desired, you can raise the low side of mower or lower the high side. 2. Go to side of mower you wish to adjust. 3. With a 3/4" or adjustable wrench, turn lift link adjustment nut (A) to the left to lower the mower, or,to the right to raise the mower. Turn nut ri to raise mower "Pjrn nut left to lower mower NOTE: Each full turn of adjustment nut will change mower height about 3/16". 4. Test your adjustment by mowing some uncut grass and visually checking the appearance. Readjust, if necessary, until you are satisfied with the results. PRECISION SIDE-TO-SIDE ADJUSTMENT 1. With alltires on level ground or driveway. CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth. 2. Raise mower to its highest position. 3. At both sides of mower, position blade at side and measure the distance (A) from bottom edge of blade to the ground. The distanceshould bethesameon bothsides. 27 4. ff adjustment is necessary, see steps 2 and 3 in Visual Adjustment instructions above. 5. Recheck measurements, adjustif necessary' until both sides are equal. FRONT-TO-BACK ADJUSTMENT IMPORTANT: Deck must be level sideto-side. To obtain the best cutting results, the mower blades should be adjusted so the front tip is 1/8" to 1/2" lower than the rear tip when the mower is in its highest position. CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth. • Raise mower to highest position. - Position any blade so the tip is pointing straight forward. Measure distance (B) to the ground atfront and reartip of the blade. ,, Iffronttip of blade is not t/8" to 1/2" lower than the rear tip, go to the front of tractor. • With an 11/16" or adjustable wrench, loosen jam nut A several turns to clear adjustment nut B. • With a 3/4" or adjustable wrench, turn front link adjustment nut {B) clockwise (Itighten) to raise the front of mower, or, counterclockwise (loosen) to lower the front mower. Tighten adjust nut B to raise mower Loosen adjust nut B to lower mower Loosenjam nut A first NOTE: Each full turn ofthe adjustment nut will change mower height about 1/8". • Recheck measurements, adjust if necessary until front tip of blade is 1/8" to 1/2" lower than the rear tip. - Holdadjustment nut in position withwrench and tighten jam nut securely against adjustment nut. TO REPLACE MOWER DRIVE BELT MOWER DRIVE BELT REMOVAL 1. Park tractor on a level surface, Engage parking brake. 2. Lower attachment lift lever to its lowest position. 3, Disengage belttension rod (K) from lock _lbracket (L). AUTION: Belttension rodis spring loaded. Have afirm grip on rod and release slowly, 4. Remove screws (P) from R.H. and L,H. mandrel covers and remove covers (Q). 5. Remove any dirt or grass clippings which may have accumulated around mandrels and entire upper deck surface. 6. Remove belt from electric clutch pulley (M), both mandrel pulleys (R) and all idler pulleys (S). BELT REMOVAL t. Remove mower (See "TO REMOVE MOWER" in this section of manual). NOTE: Observe entire motion drive belt and position of all belt guides and keepers, 2. Disconnect clutch wire harness (A). 3, Remove anti-rotation link (B) on right side of tractor. 4. Remove belt from stationary idler (C) and clutching idler (D), 5. Remove bett from centerspan idler (E). 6. Pull belt slack toward rear of tractor, Carefully remove belt upwards from transmission input pulley and over cooling fan blades (F), 7, Remove belt downward from engine pulley and around electric clutch (G). 8, Slide belt toward rear of tractor, off the steering plate(H) and removefromtractor. BELT INSTALLATION 1. I nstalt new belt from tractor rear to front, over the steering plate (H) and above clutch brake pedal shaft (J). 2. Pull belttowardfront oftractor andr01tbelt around electric clutch and onto engine pulley (G). 3, Pull belttoward rear of tractor. Carefully work belt down around transmission cooling fan and onto the input pulley (F). Be sure belt is inside the belt keeper, 4. Install belt on centerspan idler (E). 5. tnstali belt through stationary idler (C) and clutching idler (D). 6. Reinstall anti-rotation link (B) on right side of tractor. Tighten securely. 7, Reconnect clutch harness (A). 8. Make sure belt is in all pulley grooves and inside all belt guides and keepers, 9, Install mower (See "TO INSTALL MOWER" in this section of manual), MOWER DRIVE BELT INSTALLATION 1, Install belt around both mandrel pulleys (R) and around idler pulteys (S)as shown. 2. Install beltonto electricclutch pulley (M). IMPORTANT: Check beltfor proper routing in all mower pulley grooves. 3, Reassemble R,H, and L.H. mandrel covers (Q). Securely tighten all screws. ._4+_.Engage belt tension rod (K) on locking ................................ bracket (L), ("=_1 & CAUTION: Belt tension rod is spring load_ ed. Have atight gripon rodand engage slowly, iY',_t I 5. Raise attachment lift lever to highest _-_" position, TO REPLACE MOTION DRIVE BELT Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest. "J 28 (_ TO CHECK BRAKE If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dr:i concrete or paved surface, then brake must be serviced. You may also check brake by: 1. Park tractor on a level, dry concrete or paved surface, depress brake pedal all theway down and engage parking brake. 2. Disengage transmission by placing freewheel control in "transmission disengaged" position. Pullfreewheel control out and into the slot and release so it is held in the disengaged position, The rear wheels must lock and skid when you try to manually push the tractor forward. If the rear wheels rotate, then the brake needs to be serviced, Contact a Sears or other qualified service center. FRONT WHEEL TOE-IN/CAMBER Your new tractor front wheel toe-in and camber is set at the factory and is normal. The front wheeltoe-in and camber are not adjustable. If damage has occurred to affect the factory set front wheel toe-in or camber, contact a Sears or other qualified service center. TO REMOVE WHEEL FOR REPAIRS 1. Block up axle securely. 2. Remove axle cover, retaining ring and washers to allow wheel removal (rear wheels have a square key- Do not lose). 3. Repair tire and reassemble. NOTE: On rearwheels only: align grooves in rear wheel hub and axle. Insert square key. 4. Replacewashers and snap retainingring securely in axle groove. 5. Replace axle cover. NOTE: To seal tire punctures and prevent flat tires due to slow leaks, purchase and usetire sealantfrom Sears. Tire sealant also prevents tire dry rot and corrosion, Battery Washers Retaining Ring _le_Oover TO START ENGINE WITH A WEAK BATTERY _WARNING: Lead-acid batteries generate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries. If your battery is too weakto start the engine, it should be recharged. (See"BATI-ERY" inthe MAINTENANCE section of this manual). If "jumper cables" are used for emergency starting, follow this procedure: IMPORTANT: Your tractor is equipped with a 12 volt system. The othervehicle must also be a 12 volt system. Do not use your tractor battery to start other vehicles. TO ATTACH JUMPER CABLES 1. Connect one end ofthe RED cable tothe POSITIVE (+) terminal of each battery(AB),taking care notto shortagainst tractor chassis. 2. Connect one end of the BLACK cable to the NEGATIVE (-) terminal (C) of fully charged battery. 3. Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery. TO REMOVE CABLES, REVERSE ORDER 1. BLACK cable first from chassis and then from the fu[ly charged battery, 2. RED cable last from both batteries. I '_Square Key(Rear Wheel Only) 29 Battery REPLACING BATTERY n_asWARNING: Do not short battery termiby allowing awrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands, rings, etc. Positiveterminal must be connected firstto preventsparkingfrom accidental grounding. t. Lift hood to raised position. 2. Remove terminal cover. 3. Disconnect BLACK battery cable then RED battery cable and carefully remove battery from tractor. 4. Install new battery with terminals insame position as old battery. 5. Reinstall terminal cover. 6. First connect RED battery cable to positive (+) battery terminal with bolt and nut as shown. Tighten securely, 7. Connect BLACK grounding cable to negative(-) batteryterminal with remaining bolt and nut.Tighten securely 8. Close hood. TO REMOVE HOOD AND GRILL ASSEMBLY 1. Raise hood. 2. Unsnap headlight wire connector, 3. Stand in front of tractor. Grasp hood at sides, tilt toward engine and lift off of tractor, 4. When replacing hood, be sure to reconnect the headlight wire connector. _ H°iladlight Wire Connector TRANSMISSION REMOVAL/REPLACEMENT Should yourtransmission require removalfor service or replacement, it should be purged after reinstallation and before operating the tractor. See "PURGE TRANSMISSION" in the Operation section of this manual. ENGINE TO ADJUST THROTTLE CONTROL CABLE The throttle control has been preset at TO REPLACE HEADLIGHT BULB the factory and adjustment should not be 1. Raise hood. necessary Check adjustment as described 2. Remove bulb holder from the hole inthe below before loosening cable, If adjustment is necessary, see engine manual. backside of the grill. -3;--Repface-bulb in holder- and instatFbulb .......TO.ADJUST CHOKECONTROL ........................ holder securely back into the hole in the The choke control has been preset at backside ofthe grill. the factory and adjustment should not be 4. Close hood. necessary. If adjustment is necessary, see INTERLOCKS AND RELAYS engine manual. TO ADJUST CARBURETOR Loose or damaged wiring may cause your tractortorun poorly,stop running,orpravent Yourcarburetor has been presetatthe factory it from starting. and adjustment should not be necessary. • Check wiring. However, minor adjustment may be required TO REPLACE FUSE to compensate for differences in fuel, temperature, altitude or toad. Ifthe engine does Replace with 30 amp automotive-type plugin fuse. The fuse holder is located behind need adjustment, see engine manual. the dash, 30 Immediately prepare your tractor for storage ENGINE at the end of the season or if the tractor will FUEL SYSTEM not be used for 30 days or more. IMPORTANT: It is important to prevent ,_ILWARNING: Never store the tractor with gum deposits from forming in essential fuel system parts such as carburetor, fuel hose, gasoline inthe tank inside a building where ortank during storage. Also, alcohol blended fumes may reach an open flame or spark, Allow the engine to coo! before storing in fuels (called gasohol or using ethanol or methanol) can attract moisture which leads any enclosure. to separation and formation of acids during TRACTOR storage. Acidic gas can damage the fuel Remove mower from tractor for winter system of an engine while in storage. storage. When mower is to be stored for a • Emptythe fueltank by starting the engine period of time, clean it thoroughly, remove and letting it run until the fuel lines and all dirt, grease, leaves, etc. Store in a clean, carburetor are empty. dry area. • Never use engine or carburetor cleaner 1. Clean entire tractor (See "CLEANING" products in the fuel tank or permanent in the Maintenance section of this damage may occur. manual). - Use fresh fuel next season. 2. Inspect and replace belts, if necessary NOTE: Fuel stabilizer is an acceptable al(See belt replacement instructions in the ternative in minimizing the formation of fuel Service and Adjustments section of this gum deposits during storage. Add stabilizer manual). to gasoline in fuel tank or storage container. 3. Lubricate as shown in the Maintenance Aiways foilowthe mix ratiofound on stabilizer section of this manual, container. Run engine at least 10 minutes 4. Be sure that all nuts, bolts and screws after adding stabilizer to allowthe stabilizerto are securely fastened. Inspect moving reach the carburetor. Do not empty the gas parts for damage, breakage and wear, tank and carburetor if using fuel stabilizer, Replace if necessary. ENGINE OIL 5. Touch up all rusted or chipped paint Drain oil (with engine warm) and replace surfaces; sand lightly before painting, with clean engine oil. (See "ENGINE" inthe BATTER'{ Maintenance section of this manual). CYLINDER(S) • Fully charge the battery for storage. • After a period of time in storage, battery 1. Remove spark plug(s). may require recharging. 2, Pour one ounce of oil through spark plug • Tohelp prevent corrosion and power leakhole(s) into cylinder(s), age during long periods of storage, battery 3. Turn ignition key to "START" position for cables should be disconnected and bata few seconds to distribute oil. tery cleaned thoroughly (see "TO CLEAN 4. Replace with new spark plug(s). BATTERY AND TERMINALS" in the OTHER - Maintenance section ofthiS ma_nual):........................................................................................................ o Do not store gasoline from one season to , After cleaning, leave cables disconnected another. and placecables wherethey cannot come • Replaceyourgasotine can ifyourcan starts in contact with battery terminals, to rust, Rust and/or dirt in your gasoline , If battery is removed from tractor for will cause problems. storage, do not store batter/directly on ° tf possible, store your tractor indoors and concrete or damp surfaces. cover itto give protection from dustand dirt, • Cover your tractor with a suitable protective cover that does not retain moisture, Donot use plastic. Plasticcannotbreathe which allows condensationto form and will cause your tractor to rust. IMPORTANT: Never cover tractor while engine and exhaust areas are still warm, 31 TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center PROBLEM CAUSE ,,,,,, Will not start t Out of fuel. 1 FIII fuel tank. 2 Engine not "CHOKED _ properly. 2 See "TO START ENGINE _ in Operation section. 3 Engine flooded. 3 Wait several minutes before attempting to start. 4 Bad spark plug. 4 Replace spark plug. 5 Dirty air filter. 5 Clean!replace 6 Dirty fuel filter. 6 Replace fuel filter. 7 Waterin 8 Loose or damaged wiring. 8 Check all wiring. 9 Carburetor 9 See "To Adjust Carburetor" in Service and Adjustments section. Engine valves out of adiustment. 10 Contact s Sears or other qualified service center. Dirty air filter. 1 Clean/replace 10 Hardto start 1 2 Engine clacks but wilt not start fuel. ,7 out of adjustment. air filter. Empty fuel tank and carburetor, refill tank with fresh gasoline and replace fuel filter. air filter. Bad spark plug, 2 Replace spark plug, Weak or dead battery. 3 Recharge or replace battery. 4 Dirty fuel tilter. 4 Replace fuel filter. 5 Stale or dirty fuel. 5 Empty fuel tank and refill tank with fresh, clean gasoline. 6 Loose or damaged wiring. 6 Check all wiring. 7 Carburetor 7 See "To Adjust Carburetor" in Service and Adjustments section. 8 Engine valves out of adjustment. 8 Contact a Sears or other qualified sewice center. 1 Clutch/brake 1 Depress clutch!brake 2 Attachment 2 Disengage attachment 3 Weak or dead battery. 3 Recharge or replace battery. 4 =Blown fuse_-................................................................................................................................ 4 Replace fuse. 5 Corroded battery terminals. 5 Clean battery terminals. 6 Loose or damaged wiring. 6 Check all wiring. 7 Faulty ignition switch. !7 Check/replace ignition switch. 8 Faulty solenoid or starter. 8 Check/replace solenoid or starter. 9 Faulty operator presence switch (as). 9 Contact a Sears or other qualified service center. 1 Weak or dead battery. 1 Recharge or replace battery. 2 Corroded battery terminals. 2 : Clean battery terminals. 3 Loose or damaged wiring. 3 Check all wiring. 4 Faulty solenoid or starter. 4 Check!replace i3 Engine will not turn over CORRECTION ......................... out of adjustment. pedal net depressed clutch is engaged. 32 pedal. clutch. solenoid or starter. TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center PROSLEM Loss of power CAUSE ............. CORRECTION 1 Cutting too much grass/too fast, 1 Raise cutting height/reduce 2 Throttle in "CHOKE" position. 2 Adjust throttIe control. speed 3 Build-up of grass, leaves and trash under mower, 3 Clean underside of mower housing, 4 Dirty air _ter. 4 Clean/replace 5 Low oil level/dirty oil, 5 Check oil level/change oil, 6 Faulty spark plug. 6 Clean®aporchangesparkplug 7 Dirty fuel filter, 7 Replace fuel filter. 8 Stale or dirty fuel. 8 Empty fuel tank and refill tank witt" fresh, clean gasoline. 9 Water in fuel. 9 Empty fuel tank and carburetor, refill tank with fresh gasoline end replace fuel fiJter, air filter. !10 Spark plug wire loose. 10 Connect & tighten spark plug wire. 11 Dirty engine air screen/fins, 11 Clean engine air screen/fins. 12 Dirty/clogged muffler, 12 C[eanireplace 13 Loose or damaged wiring. 13 Check all wiring. 14 Carburetor 14 See 'q'o Adjust Carburetor" in Service and Adjustments section. 15 Engine valves out of adjustment. 15 Contact a Sears or other qualified service center. out of adjustment, muffler, ,,,,,,.,,,,,,, .... 1 Worn. bent or loose blade. 1 Replace blade. Tighten blade boit, 2 Bent blade mandrel. 2 Contact a Sears or other qualified service center, 3 Loose/damaged 3 Tighten loose part(s), Replace damaged parts. Engine continues to run when operator leaves seat with attachment clutch engaged 1 Faulty operator-safety control system, I Check wiring, switches and connections. If not corrected, contact a Sears or other Poorcut - uneven t Worn, bent or loose blade. presence ,,,,,,........ 2 1 Replace blade. Tighten blade bolt. _Mowerdeck_ not IeveI_............................................... 2 Buildup of grass, leaves, and trash under mower. 3 Clean underside housing. Bent blade mandrel. 4 Contact a Sears or other qualified service center, Clogged mower deck vent from build-up of grass, leaves, and trash around mandrels. 5 Clean around mandrels open vent holes. to ,,_,,,_,,, ,,., ,,, , 1 Obstruction 1 Remove obstruction, 2 Worn/damaged 2. Replace mower drive belt. 3 Frozen idler pulJey. 3 Replace idler pulley, 4 Frozen blade mandrel, 4 Contact a Sears or other qualified service center. 3 Mower blades will not rotate part(s). in clutch mechanism, mower 33 drive belt of mower TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center PROBLEM 'CAUSE Poor grass discharge Headlight(s) not working (if so equipped) 1 Engine speed too slow. 1 Place throttle control in "FAST" position, 2 Travel speed too fast. 2 Shift to slower speed. 3 Wet grass. 3 Allow grass to dry before mowing 4 Mower deck not level 4 Level mower deck. 5 Low/uneven 5 Check tires for proper PSi. 6 Worn. bent or loose blade. 6 Replace/sharpen blade bolt. 7 Buildup of grass, leaves and trash under mower, 7 Clean underside of mower housing. 8 Mower drive belt worn. 8 Replace mower drive belt. 9 Blades improperly installed. 9 Reinstall blades sharp edge down tire air pressure. blade. Tighten 10 Improper blades used. 11 Clogged mower deck vent holes 11 from buildup of grass, leaves, and trash around mandrels. Clean around mandrels to open vent holes. I Ught swi'tch is "OFF'. Turn {ight switch "ON". 2 Bulb(s) or lamp(s) burned out. 2 Replace bulb(s) or lamp(s). 3 Faulty light _tch. 3 Check/rep[ace 4 Loose or damaged wiring. 4 Check wiring and connections. 5 Blown fuse. 5 Replace fuse. Bad battery cell(s). 1 Replace battery. 2 Poor cable connections. 2 Check/clean 3 Faulty regulator (if so equipped). 3 Rep{ace regulator. 4 Replace alternator. 1 Place freewheel control in "ENGAGED" position. ,,,,,,,,,,,,,,,,,,,,,, , Battery charge CORRECTION"' "10 Replace with blades listed in thJs manual. '_ !1 light switch. ,,,,, will not 1 ,,,, 4 Faulty alternator. _ Freewheel control in "DISENGAGED" position. "" "" all connections. ,_, Loss of drive ,u,,, 2 Debds on steering plate (if 2. See "CLEANING" in the .......................................................................................... eciu!pped)_........................................................................................ rDaintenance s_qt!Qn ...................................... 3 Motion drive belt worn, damaged, or broken. 3 Replace motion drive belt. 4 Air trapped in transmission during shipment or servicing. 4 Purge transmission. 5 Axle key missing. 5 Install axle keyat rear wheel. See "TO REMOVE WHEEL" in the Service and Adjustments section. 1 Engine throttle control not se_ I between half and full speed (fasl position before stopping engine, Move throttle control between half and full speed (fast) position before stopping engine. 1 Reverse operation system (ROS) is not "ON" while mower or other attachment is engaged, , Engine "backfires" when turninq engine "OFF" ,,,,,, ,,, ...... Engine dieswhen tractor is shifted into reverse ,,, , 34 ...... 1 , Turn ign;tion key to ROB "ON" position. See Operation section. TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center NEED MORE HELP? find the answer and more You'll on managemyhome.com - for free! i • Findthisand a[[your otherproductmanuaLsonUne. ....... Get-answers-from our team-of_h0meexperts; ............................................................................................................. " Get a personalized maintenancep[anforyour home. , Findinformation and tooLsto helpwith home projects, manage home brought to you by Sea_s 35 SUGGESTED co o3 GUIDE FOR SIGHTING SLOPES ONLY RIDE UP AND DOWN NOT ACROSS HILL 15 DEGREES 1 FOR SAFE OPERATION HILL, MAX. down the face of slopes, never across the face. Do not mow WARNING: To avoid serious injury, operate your f_ractor up and slopes greater than 15 degrees. Make turns gradually to prevent tippTng or ioss of control. Exercise extreme caution when changing direction on slopes. 1, Fold this page along dotted line indicated above. 2. Hold page before you so that its left edge is vertically parallel to a tree trunk or other upright structure, 3, Sight across the fold in the direction of hill slope you want to measure. 4. Compare the angle of the fold with the slope of the h_lL Garantia .......................................................... Reglas de Seguridad ...................................... Especificaciones del Producto ........................ Montaje/Pre Operaci6n ................................... Operaci6n ....................................................... Mantenimiento ................................................ 37 38 41 42 48 56 Programa de Mantenim[ento .......................... 56 Servicio y Ajustes ........................................... 61 Almacenamiento ............................................. 66 Identificaci6n de Problemas ........................... 67 Servicio Sears .................................. Contratapa Garantia para equipos tractores Craftsman GARANTiA COMPLETA DE CRAFTSMAN POR DOS AI_JOS desde la fecha de compra, todae las partee no sustituiblee de eete equipo tractor eet.'__n garantizadas contra cualquier defecto de material o mano de obra. Una parle no sustitu[ble defectuosa recibir& reparaciSn o reemp[azo gratuito encaea eila reparaci6n ee imposible. POR CINCO AI;,IOS deede la fecha de compra, el bastidor y el eje delantero de eete equipo tractor eetdn garantizados contra cualquier defecto de material o maria de obra. Un bastidor o eje delantero defectuoso recibir__reparaci6n o reemplazo gratuito en case si la reparaci6n es imposib[e. DURANTE 90 D[AS desde la fecha de compra, la bateria (Una parts eustitu[ble) de este equipo tractor est& garantizada contra cualquier defecto de matedaI o mano de obra (nusstra prueba comprueba que no contendrd carga). Una bater[a defectuoea recibir_, un reemplazo gratuito encaea. GARANTiA LIMITADA est_ provisto) DE POR VIDA ADICIONAL en el EJE DELANTERO DE HIERRO COLADO (sl DURANTE EL TIEMPO EN QUE $E USE por el propietario original despu_s del quinto aP,o a partir de la fecha de compra, el eje delantero de hierro colado (ei est,. prov[sto) de este equipo tractos eetd garantizado contra cualquier defecto de material o mano de obra. Con el comprobante de compra, un eje de_antero de hierro colado recibir& un reemplazo gratuito encasa. SERVIClO DE GARANTiA Pars conccer los detalles de la cobertura de garantia pars obtener una reparaci6n IEame at 1 -B00-659-5917 6 visite el sitio web: wv_v. crafteman.com En todoe los casoe anteriores, si el reemplazo el miemo modelo o uno equivalents. o reemplazo gratuito, es impoeible, el equipo tractor ser_ sust[tuido sin cargo con Toda la cobertura de garantia anterior set& nula ei este equipo tractor se utiliza alguna vez pars brindar eervicios comerciales o si se alquila a otra persona. Eeta garantta cubre 0NICAMENTE defectosde materialy mano de obra. Lacobertura de garantia NO incluye: • Partes sustituibles (excepto la bateria) que se puedan desgaetar per el uso normal dentro del periodo de garantia inclueo, pero sin limitarse a, cuchillas, bujias, filtros de airs, correas y filtroe de aceite.. • Servicios de mantenimiento eet_.ndar' cambios de aceite o afinacionee. • Reemplazo o reparaci6n de neum_.t[cos por pinchazos caueados por objetos extemos como clavos, espinas, toconee o vidrios. • Reemplazo o reparaci6n de naum=Sticoe o ruedas pot desgaste normal, accidentes o por operaciSn o ......mantenimiento incorrectos: .......................................................................................................................................................................... • Reparaciones necesarias pot abuso deI operador inc]ueo, pero sin limitaree a, daflos caueados por remolcar objetoe que superen la capacidad deI equipo tractor, chocar contra objetos que doblen el bastidor, el eneamble deI eje o el cigLieSaI o eobrepasar la velocidad del motor. • Reparaciones necesarias pot negl[gencia del operador, incluso (pero sin Fimitaree a elIo) daflos el6ctricos y mec&nicoe causados por el a[macenamiento incorrecto, pot no usar et grado y la cantidad correctos de aceite de motor, por no mantener del muel[e libre de residuos inflamablee o por no mantener el equipo tractor de acuerdo con lae inetrucciones que contiene el manual del operador. • Limpieza o reparaciones del motor (sistema de combustible) cuando ee determina que se us6 combustible contaminado y oxidado (sarro), En general, el combustible debe uearse dentro de los 30 dies postedores a su compra. • Deterioro y desgaste normal de los acabados exteriores o sustituci6n de r6tulos de productos. Esta garantia le otorga derechos legales especfficos, y ueted tambi_n puede tener otros derechos que vat{an de un estado a otro. Sears Brands Management Corporation, Hoffman Estates, IL 60179 37 ,_PELIGRO: Esta Maquina cortadora es capaz de amputar las manosy los pies y de lanzar objetos, si no se observan las instrucciones de seguridad siguientes se pueden producir lesiones graves o la muerte. ° No maneje la m_quina si no tiene Ia trampa _ADVERTENC1A: Siempre desconecteel alampara c@spedcompleta, la canaleta de descarga bre de Ia bujia y p6ngalo donde no pueda entrar u otrosdispositivos de seguridad en su lugar en contacto con la bujla, para evitar el arranque yen funcionamiento. por accidente, durante ]a preparaci6n, el trans• Ralentizar antes de girar. porte, el ajuste o cuando se hacen reparaciones. • Nunca dejar una m__quinaencendida sin vigi_0_DVERTENCIA-" No avarice cuestaabajo a punlancia. Apagar siempre Ias cuchillas, poner el to muerto yaque podrfa perder el control del tractor. freno de estacionamiento, parar el motor, y ,_ADVERTENCIA: RemoIque solamente los quitar [as Ilaves antes de bajar. accesodos recomendados y conformes alas • Desenganche Ias hojas cuando no est@cortancaracteristicas indicadas pot el fabricante de su do c6sped. Apague el motor y espere hasta que tractor. Tenga coidado y prudencia al utilizar el todas las partes se detengan por completo antractor. Cuando se encuentre en un declive, oper tes de limpiarIa m&quina, retirar latrampa para utilizando exclusivamente la velocidad m,_s baja. c@sped o destapar la canaleta de descarga. En caso de un declive una carga e×cesiva po• Hacer funcionar Ia m_.quina SSIocon la luz deI dria resultar peligrosa. Los neum_.ticos pueden dia o luz artificial buena. perder la tracci6n con el suelo y hacerle perder • No hacer funcionar la m&quina estando bajo el control de su tractor. los efectos de alcohol o droga. _I_ADVERTENCIA: El tubo de escape del motor, • Poner atencibn al tr&fico cuando se opera cerca de calles o se cruzan. algunos de sus constituyentes y afgunos componentes del-veh_culo contienen o desprenden , Poner la m_v,ima atencidn al cargar o descarproductos quimicos conocidos en el Estado de gar Ia m&quina en una caravana o cami6n. California como causa de c&ncer y defectos al • Uevar siempre gafas de protecci6n cuando se nacimiento u otros dafios reproductivos. hace funcionar la m&quina. _ADVERTENCtA: Los bornes, terminales y ac• Los datos indic.anque los operadores a partir cesorios re]ativos de la bateria contienen piomo de los 60 afios estan afectados por un gran o compuestos de plomo, productos quimicos porcentaje de heridas retativas a Ia conducci6n conocidos en el Estado de Califomia como causa del cortac@sped. Estos operadores tendrian de c&ncer y defectos al nacimiento u otros daSos que evaluar su habilidad de hacer funcionar reproductivos. Lavar tas manos despu_s de el cortac@sped de modo Io bastante seguro para proteger a si mismos y a otras personas rnanipular|os. de heridas graves. I. FUNCIONAMIENTO GENERAL - Seguir Ias recomendaciones de[ fabricante •Leer, entenderyseguirtodaslasinstrucciones para los pesos y contrapesos de tas ruedas. sobre [a mdquina yen el manual antes de • Mantener la m&quina Iibre de hierba, hojas u empezar, otros escombros que pueden tocar el tubo de • No poner 1asmanos o los pies cerca de partes escape/partes deI motor calientes y quemarse. giratorias o debajo de la m_.quina, mantener No permitir queet puente del cortac@sped siempre limpia la abertura de descarga, cargue hojas u otros residuos que pueden • Permitir el funcionamiento de la m_.quina s61o causar acumulaciones. Limpiar toda salpica_-adultos que tengan familiaridad con las ............dora de aceite o carbttrante ant_s de hacerinstrucciones. operaciones sobre Ia m,_quina o guardarla. • Limpiar el &rea de objetos como piedras, Dejarla enfriar antes de guardarla. juguetes, cables, etc. que pueden ser reeogiIi. FUNCIONAMIENTO EN PENDIENTES dos y disparados con las cuchillas. Las pendientes son el mayor factorde acoidentes • Asegurarse de que el &rea est_ IJbrede otras relativos a la p6rdida de control y vuelco, que personas antes de ponerla en marcha. Parar pueden causar severas heridas o muerte. El funIa m&quina si alguien entra en el _rea. cionamiento en pendientesrequiere una atenci6a • Nunca Ilevar pasajeros. extra. Si no es posible hacer marcha atr&s en una • No cortar marcha atr&s al no ser absolupendiente o site sientes incomodo,no In cortes. tamente necesario. Mirar siempre abajo y * Cortar hacia arriba y abajo de una pendiente, detante mientras se procede atr_is. no de modo horizontal. • Nunca dirigir el material descargado hacia na, Poner atenciones a los hoyos, las raices, los die. Evitar descargar material contra paredes bultos, las piedras u otros objetosescondidos. u obstrucciones. El material podria rebotar : Et terreno irregularpuede volcar la m_.quina. hacia el operador. Parar las cuchilias cuando se pasan superficies de grava, La hierba alta puede esconder obst&culos. 38 • Escoger una velocidad de marcha baja de modo que no sea necesario pa.rarse o cambiar estando en una pendiente. - No cortar la hierba rnojada. Las ruedas pueden perder traccibn. Porter siempre una rnarcha cuando se est& en pendientes. No poner en punto muerto e ir cuesta abajo. • Evitar arrancar, pararse o girar en una pendienre. Si las ruedas pierden traccibn, desconectar las cuchillas y proceder despacio cuesta abajo en la pendiente. • Mantener todo los movimientos en Ias pendientes Ientos y gradual. No hacer cambios repentinos de velocidad o direcci6n, ya que pueden causar et escape de la m_.quina. • Poner la m&xima atenci6n cuando la m&quina funciona con captadores de hierba u otros dispositivos enganchados; pueden afectar la estabilidad de Ia m&quina. No usar en pendientes empinados. • No intentar estabilizar la rn&quina poniendo el pie en el terreno. • No cortar cerca de bajadas, cunetas y orillas. [_as m&quina puede voicarse improvisamente si una rueda est& en el horde o se hunde. • Tenet el m&ximo cuidado cuando se acerca a cantos ciegos, arbustos, &rboles u otros objetos que pueden impedir la vista de niSos. IV. REMOLQUE * Remoicar s6Io con una m&quina que tenga un gancho disefiado para rernolcar. Enganchar el equipo o remolcar s61oen el punto dispuesto al efecto. - Seguir las recomendacionesdel productorcon respecto a los limites deI equipo por remolcar y et remolque en pendientes. , l'-,luncapermitir qua nifios u otras personas est6n dentro deI equipo por remolcar. * En pendientes, el peso det equipo remotcado puede causar la p6rdida de tracci6n y la perdida de control. , Viajar despacio y dejar rn_.sdistancia para frenar. V. SERVIClO MANIPULACION SEGURA DE LA GASOLINA Para evitar heridas personales o daSos alas cosas, poner el m_imo cuidado a la hora de manipular la gasolina. La gasotina es extremamente inftamable y los vapores son explosivos. * Apagar todos los cigarrillos, cigarros, pipas y o_'as fuentes de ignici6n. • Usar s6tocontenedores para gasolina aprobados. , Nunca quitar ef tap6n de la gasolina o aSadir carburante con el motor en marcha, dejar enfriar el motor antes del abastecimiento de la gasolina. , Nunca abastecer Ia mz_quinaal interior de un local. • Nunca guardar la m__quina o e] contenedor deI carburante donde haya una llama abierta, chispas o una Iuz piloto como un calentador de agua u otros dispositivos. , Nunca flenar los contenedores a! interior de un vehiculo o en una caravana o cami6n III, NIl;lOS _ADVERTENCIA: LOS NII_IOS PUEDEN SUFRIR DANOS CON EL USO DE ESTE EQUIPO. La Academia Estadounidense de Pediatria (American Academy of Pediatrics) recomienda que s61o se permita a ni_os con una edad m_nima de 12 afios manejar m_.quinas cortac_sped rnanua]es, y al menos de 16 argospara maneiar tractores cortac_sped. Si eI operador no pone atenci6n a la presencia de los niSos pueden ocurriraccidentes tr&gicos. Los niSos a menudo est&natraidos por la m&quinay las actividad de cortar. No dar por hecho de que los nifios se queden adonde estaban la 51tima vez que los vistes. Mantener los nifios fuera de! &rea de corte y recubiertos can un forro de pI&stico. Colocar ---=qigil_,closp6rL_fiadulto i'espor_sa.ble_que n0sea ................ siempre los contenedores enel-terreno-tejos ....... el operador, del vehiculo cuando se est,. llenando. ° Quitarel equipo de gas del cami6n o caravana Estar alerta y apagar la m&quina si un niSos y abastecerlo en el terreno. Si no es posible, entra en et &rea. abastecer dicho equipo con un contenedor porAntes y durante la marcha atr_s, mirar adelante t&til, m&s bien que de un surtidor de gasoiina. y abajo para vet si hay niSos pequeSos. ° Mantener la boquilla a contacto del borde Nunca Ilevar niSos, incluso si hay las cuchiilas de] dep6sito de carburante o ]a abertura del apagadas. Podrian caer y herirse seriamente contenedor durante toda la operaci6n de o intefferircon el funcionamiento seguro de la abastecimiento. No utilizar un dispositivo con m&quina, los nifios que se han lievado precboquilla cerrada-abierta. edentemente pueden aparecer de pronto en el ° Si se vierte carburante sobre Ia ropa, cambi&rea de corte por otro paseo y ser atropeltados arse la ropa inmediatamente. o tumbados pot Ia m,_quina. ° Nunca ]lenar el dep6sito m&s de lo debido. Nunca dejar que los niSos manipulen la m_Volver a colocar el tap6n deI gas y cerrar de quina. modo firme. 39 OPERACIONES DE SERVtCIO GENERALES • Nunca hacer funcionar la m_quina en un &rea cerrada. • Mantener todas las tuercasy pemos apretados para asegurarse de que trabaja en condiciones seguras, ° Nunca modificar los dispositivos de seguridad. Controlar su correcto fiJncionamiento regularmente. • Mantener la m_quina libre de hierba, hojas u otros residuos acumulados, Limpiar las salpicaduras de aceite o carburante y quitar cualquier cosa mojada con carburante. Dejar que Ia m&quina se enfrie antes de guardarla. • Si se golpea un objeto ajeno, hay que pararse e inspeccionar la m&quina, Reparar, si es necesario, antes de volver a poner en marcha, • Nunca hacer ning0n ajuste o reparaci6n con el motor en funci6n. • Verifique los componentes de la trampa para c_sped y la canaleta de descarga con frecuencia y sustituya con repuestos recomendados por el fabricante cuando sea necesado. • Las cuchillas del cortac_sped son afiladas. Envolver la cuchilla, ponerse guantes y poner la m_.ima atenci6n cuando se hacen operaciones en elias, • Controlarel funcionamiento del frenofrecuentemente. Ajustar y hacer las operaciones de mantenimiento cuando eso sea necesario, • Estar alerta y apagar la m_.quina si un nifios entra en el _.rea, Antes y durante la marcha atr&s, mirar adelante ° Mantener y sustituir las etiquetas de seguddad y abajo para ver si hay nifios pequefios, e instrucci6n, cuando sea necosario, • Cortar hacia arriba y abajo de una pendiente ° Asegurarse de que el &rea est6 libre de otras (I 5° M_), no de modo horizontal. personas antes de ponerla en marcha, para Ia • Escoger una velocidad de marcha baja de m_.quina si alguien entra en el &rea. modo que no sea necesario pararse o cambiar • Nunca Ilevar pasajeros, estando en una pendiente. • No cortar marcha atr&s al no ser absolutamente • Evitar arrancar, pararse o girar en una pendiennecesado. Mirar siempre abajo y delante te. Si las ruedas pierden tracci6n, desconectar mientras se procede atr&s, las cuchillas y proceder despacio cuesta abajo en la pendiente. • Nunca Ilevar niSos, inoluso si hay las cuchillas apagadas, Podrian caer y herirse seriamente - Si la m&quina se para mientras va cuesta o interferir con el funcionamiento seguro de Ia arriba, desconectar las cuchillas, poner la marcha atr_s y ir hacia atr_.s despacio. m&quina, los nifios que se han Ilevado precedentemente pueden aparecer de pronto en el • No girar estando en pendientes si no es nece_rea de corte por otto paseo y ser atropellados sario, y luego girar despacio y gradualmente o tumbados per la m&quina. cuesta abajo, si es posible. -'--Mantene_losnifiosfueradel&readecortey • ........ AI cargaro descargarla m&quina_no sobrepasevigilados per un adulto responsable que no sea el &ngulo m&ximo recomendado de 15°, el operador. 4O ESPECIFICACIONES DEL 3_0 Galones/11,35 L Regular Sin PIomo Tipo de Aceite (AP_: SG-SL): SAE 30 (sobre 32°F]0°C) SAE 5W30 (deabajo B2°F,/0°C) Capacidad Aceite: Con Fil_ro: Sin Filtro: de En el estado de California, Laley exige Io anterior (Secci6n 4442 deI "California Public Resources Code"). Otros estados pueden contar con otras leyes parecidas. Las Ieyes federales se aplican en la tierras federales. Su centro de Servicio m&s cercano tiene disponible amortiguadores de chispas para el silenoiador. (Vea laseccibn de Partes de Repuesto en el manual Ingl6s deI duefio.) PRODUCTO Capacidad y Tipo de Gasolina: 64 Ozj1.96 L 60 OzJ1.77 L ACUI=RDOS DE PROTECCi6N PARA LA REPARACION Congratulaciones por su buena compra. Su Sistema de 16 Amps @ 3600 RPM nuevo producto Craftsman® est,. diseSado y Carga: fabricado para funcionar de modo fiable pot Bateria: Amp/Hr: 28 muchos amos. Pero como todos ios productos, Min. CO.&: 230 puede necesitar alguna reparaci6n de tanto en Mode[o TamaSo: U_ R tanto. En este caso tenor un Acuerdo de ProtecTorsi6n del Perno 45-55 Ft. LbsJ62-75 Nm cibn para Ia Reparaci6n puede hacerles ahorrar de la Cuch[lla: dinero y fastidios. Cornpre ahora unAcuerdo de Protecci6n para la FELICffACIONES por la compra de su tractor.Ha Reparaci6n y prot6gese de molestias y gastos sido disefiado, planificadoyfabricadopara darle la inesperados. mejor confiabilidady el mejor rendimiento posible. Un Aouerdo incluye los puntos siguientes: En el caso de que se encuentre con cualquier • Servieio experto de nuestros 12.000 espeproblema que no pueda solucionarfdcilmente, cialistas profesionales en la reparaci6n. haga el favor de ponerse en contacto con un centro de servicio Sears o con un otto centro de • Servicio ilimitado sin cargo alguno para serviciocualificado. Cuenta con representantes las partes y la mano de obra sobre todas las bien capacitados y competentes y con las herreparaciones garantizadas. ramientas adecuadas para dade servicio e para • Sustituci6n del producto si su producto reparar este tractor. garantizado no puede set arreglado. Haga el favor de leer y de guardar este manual • Descuento de110% sobre e] precio corriente Estas instruc-cionesle permitir&nmontar y mandel servicio y de [as partes relativas al servicio tener su unidad en forma adecuada. Siempre no cubiertas pot el acuerdo; tambi6n el 10% observe las "REGLAS DE SEGUR]DAD." menos sobre el precio corriente de un control de mantenimiento preventivo. RESPONSABILIDADES DEL CLIENTE • Ayuda r_pida pot tet_fono - soporte telefSni• Lea y observe Ias reglas de seguridad. co pot parte de un representante Sears sobre • Siga un programa regular de rnantenimiento, productosque requieren un arreglo en casa, y cuidado y uso de su tractor. adem&s una programaci6n sobre los arreglos • Siga Ias instrucciones descritas en las secm&s convenientes. ciones "Mantenimiento" y '_lmacenamiento" Cuando se ha comprado el Acuerdo, basta con de este manual. una I]amada telef6nica para programar el servicio. • Utilice prendas de seguridad adecuadas al Puede Ilamar cuando quiera, dla y neche o fijar manejar Ia mdquina, incluidos(como minimo) en I|nea una cita para obtener e] servicio. Sears calzado de seguridad, galas protectorasy protiene m&s de 12.000 especialistas profesionales tecci6n auditiva. No utilice pantalones cortos en la reparaciSn, que tienen acceso a m_.s de y!o caizado abierto cuando corte Ia hierba. 4.5 millones de partes y accesorios de calidad. --- -lnforme siempre a alguieri de que se dispone ........ Este esel tipo de pr0fesionalidadcon que puede a cortar ]a hierba en el exterior, contar para ayudar a alargar Fa vida del producto que acaba de comprar, pot muchos afios. _Iv_.DVERTENCIA" Este tractor viene equipado iCompre hoy su Acuerdo de Protecci6n para ta con un motor de combusti6n internay no se debe Reparaoi6n! usar sobre, o cerca, de un terreno no desarroliado Se aplican algunas limitaciones y exclusiones. cubierto de bosques, de arbustos o de c_sped, Para conocer los precios y toner mds Inforo menos queet sistema de escape del motor macibn, Ilame al 1-800-8276655, venga equipado con un amortiguador de chispas Bujia Champion QC12YC (Abertura: .040"/1.02 mm) que cumpla con tas [eyes Iocales o estatales (si existen). Si se usa un amortiguador de chispas, el operador debe mantenerlo en condiciones de trabajo eficientes. SERVIClO DE INSTALACI(_N SEARS Para /a insta/acidn profesiona/ Seara de aparatos de casa, puertas de garaje, calentadores de agua y otros importantes artfculos para ta casa, en U.S.A Ilamar a 1-800-4-MY-HOME@ 41 Segadora Rueda Delantera De La Segadora (2) Conjunto de eslabones de levantamiento (5) 1-3/16" Arandela \\ ,_j (1) Perno (1) 1-1/4" Arandela traseros (1) Abrazadera peque_o _\ de retenci6n _ -%. (___ (1) Es|abones _\ de ievantam|ento "% delanteros "_ (1)3t8-16" (1) Rueda Tuerca (5) Abrazadera grande de retenci6n Si Los Tiene, (1) Barra Antioscilaci6n (1) Abrazadera peque_o (1) 3/4" Arandela Llaves de retenci6n (2) Llaves *lnstalado por el d[stribuidor *Juego de cubierta 42 Hoja de pendiente ! Su tractor nuevo ha sido montado en la f&brica con la excepci6n de aquellas partes que no se ban montado pot razones de env_o. Para asegurarse que su tractor funcione en forma adecuada y segura todas Ias partes y los articulos de ferreteria que se monten tienen que set apretados en forma segura. Use Ias herramientas correctas, seg_n sea necesario, para asegurarse de que est_n apretados en forma segura. HERRAMIENTAS NECESARIAS PARA EL MONTAJE Un juego de Ilaves de tubo facilitarb el montaje, A continuaci6n se enurneran los tamafios de las I[aves estbndar, (2) Uaves de 7/t 6" Cuchillo (1) Llaves de U2" Medidor de preal6n (1) Llave de 3/4" Pinzas {1) Montura de 3/4 pulg. con mando de trinquete (1) Uaves de 1/2" Linterna Cuando en este manual se mencionan los t@rminos"mano derecha" o "mano izquierda" se refiere a cuando usted se encuentra en Ia posici6nde operaci6n (sentadola detr_s del volante de direcci6n). PARA REMOVER EL TRACTOR CAJA DE CARTON DE LA DESEMPAQUE LA CAJA DE CARTON • Remueva todas las partes sueltas que est&n accesibles, y las cajas de partes, de la caja de cart6n grande, • Cortaralo Iargode Iaslineas de puntos entodos los cuatro paneles de cart6n. Remover los paneles de cierre y aplanar los paneles laterales. ° Remueva la segadora y los materiales del embalage, Revise si hay partes sueltas adicionales o cart6n y remu@valas. ANTES DE REMOVER EL TRACTOR DE LA CORREDERA 3. Desconecte la palanca para trabar el asiento en la posici6n. AVISO: Ahora puede rodar su tractor fuera de fa corredera. Siga Ias siguientes instrucciones para remover el tractor de la corredera. ADVERTENCIA: Antes de empezar, leer, entender y seguir todas las instruccionespresentes en la secci6n Operaciones de este manual, Asegurarse que el tractor est_ en un &rea bien ventilada, Asegurarse que la zona delante deI tractor est_ Iibre de otras personas y objetos. PARA HACER RODAR ELTRACTOR FUERA DE LA CORREDERA (Veaiaseccibndela operacibn para la Iocalidad y la funcibn de los controles) • Levante la palanca de Ievantamiento deI accesorio a su posici6n m&s alta. ° Suelte el freno de estacionamiento presionando el pedal deI embrague/freno. Ponga el control de Ia rueda libre en la posici6n de giro libre para desenganchar la transmisi6n, (Vea "PARA TRANSPORTAR" en Ia secci6n de Operaci6n de este manual). • Haga rodar et tractor hacia delante fuera de la corredera. VERIFIQUE LA BATERIA t, Levante del capota a la pos[ci6nievantada. Continuar con las siguientes instrucciones. AVISO: Siesta bateria esta utilizadadespu@sdel INSTALE LA SEGADORA rues y a_o indicado sobre la etiqueta (Ia etiqueta quese encuentraentre los terminales), eargue la 1. ACCIONE LA PALANCA DEL FRENO DE bateria pot un,m_nimo de una hora a 6-10 amps. ESTACIONAMIENTO Y LA PALANGA DE LE(Vea "BATERI_' en la secci6n de Mantenimento VANTAMIENTO DELACCESORIO INFERIOR de este manual). • Pres[one el pedaI de embrag ueifreno cornpie...... ------Para-instate-Ia batefia; y cable de la.................... " bateria, realice el procedim!entodescrito en tamente hasta abajo y mant6ngalo apretado. "REEMPLAZAR LA BATERIA_'del capituIo de • Tire y mantenga Ia palanca del freno de estaServicio y Ajustes de este manual, cionamiento hacia arriba, libere la presi6n deI pedal de embrague!freno y, luego, suelte la palancadelfrenodeestacionamiento. El pedal debe permanecer en posici6n de frenado. Aseg_rese de que elfreno de estacionamiento mantendr& asegurado e] tractor. AJUSTE EL ASIENTO 1. Si_ntese sobre el asiento. 2. Levante Ia palanea del ajuste (A) hacia ardba y mueva el asiento hasta que alcance una posic[6nc6modaquele permitapresionar completamente sobre el pedal del embragueifreno. 43 PRECAUCION: Lapalancade Ievantamiento est_.accionada pot resorte. Sost@ngaIafirmemente apretada, b&jela Ientamente y eng&nchela en ]a posicibn m&s baja, La palanca deIevantamiento se encuentra en el lado izquierdo de Ia defensa. 3. GIRE ELVOLANTE HACIA LA tZQUIERDA Y UBIQUE LA CORTADORA DE CESPED EN SU LUGAR ° Gire el volante completamente hacia la izquierda y ubique la cortadora de c@sped en el lado derecho del tractor con et blindaje deflector (Q) a la derecha, Palanca De Levantamiento Parte Delantera 2. ARMELARUEDACALIBRADORADELANTERA _W) ENLAPARTE DELANTERA DE LACORTADORA DE CESPED J ' =*'" ='_1_ _Transeje Parte Trasera Ho Escuadra De La Cortadora De C(_sped Delantera W. Rueda Calibradora Delantera X, Perno Con Resalto Y. Arandela De 1-1/4 Z. Tuerca De Seguridad De 3/8-16 Q. Blindaje Deflector 4. DESLICE DEBAJO LA CORTADORA DEL TRACTOR DE CISSPED • L/eve la correa hacia adelante y veritique que su trayectoria sea correcta en todos Ios surcos de la polea de la cortadora de c_sped, NOTA: Aseg_rese de que los brazos de suspensi6n lateral de la cort_dorade c_sped (A) est_n orientados hacia adelante antes de deslizar la cortadora de c_sped debajo del tractor. Deslice Eacortadora de c_sped debajo del tractor hasta que se encuentre centrada debajo del tractor. ® A. Brazos De Suspensi6n Lateral De La Cortadora De C6sped B, Resorte De Retencidn C, Eslabones De Levantamiento Traseros D, Escuadra Trasera Derecha De La Cortadora De C@sped E. Conjunto De Eslabones De Levantamiento Delanteros E Escuadra De Suspensi6n Delantera H. Escuadra De La Cortadora De C_sped Delantera I. Escuadra Trasera Izquierda De La Cortadora De C_sped K, VariIla Tensora De La Correa L Escuadra De Bloqueo M, Polea Del Embrague DeI Motor Q, BIindaje Deflector S. Barra Antibalanceo W, Rueda Catlbradora Delantera 44 Haga oscilar el extrerno con la arandela integrada de la barra antibalanceo (S) hacia la escuadra de la plataforma de la cortadora de c_sped en el lado derecho de la cortadora, Inserte el extremo con la arandela integrada de la barra en el agujero de la escuadra trasera de la cortadora de c_sped (D). Mueva la cortadora de c_sped seg6n sea necesario para insertar el extremo con la arandela integrada de la barra en la escuadra trasera de Ia cortadora de c_sped (D). Asegure con una arandeta pequeSa y un resorte de retenci6n pequefio, como se ilustra. Deflector 5. SILATIENE0 INSTALEELA BARRA ANTIBALANCEO (S) BARRA HaCia El ANTIBALANCEO (S) Hacia La Plataforma nseje Extremo En 90 ° Extremo Con Arandela Integrada T. Desde el lado derecho de la cortadora de c_sped, inserte primero el extremo en 90° de Ia barra antibalanceo (S) dentro del agujero de la escuadra de transeje (T), ubicadocerca de la rueda trasera izquierda adelante del transeje. NOTA: Puede resultar 6til usar una Iinterna. 6. • Ubicaci6n _"_ .? .......... De La Barra _ ! !S'_S/ ........-_ Antibalanceo (S) _._z._:_ _ i t \ 7. NOTA: Dependiendo del modelo, laescuadra (T) puede ser diferente de Ia que se ilustra, pero el agujero para ta barra antibalanceo estar& en ta misma posici6n/ubicaci6n. 45 Escuadra INSTALE LOS BRAZOS DE SUSPENSION LATERAL DE LA CORTADORA DE CESPED (A) EN EL CHA$IS Ubique el agujero de]antero deI brazo de suspensi6n lateral (A) sobre Ia chaveta en la parte exterior del chasis det tractor y asegure con una arandela grande y un resorte de retenci6n grande (B). Repita en el lado opuesto del tractor. ConadoraDe C6sped Co_adoraDe C_sped INSTALE LOS ESLABONES DE LEVANTAMIENTO TRASEROS (C) Inserte el extremo de varilla del eslab6n de levantamiento trasero (C) dentro del agujero (U) en el brazo de suspensi6n del ejede levantamiento del tractor y haga oscilar el eslab6n hacia abajo hacia Ia cortadora de c@sped. Levante la esquina trasera de ]a cortadora de c6sped y ubique la ranuraen elconjunto de eslabonessobrelachavetaenlaescuadratrasera de lacortadora (D);asegure con unaarandela grande y un resorte de retenci6n grande. Repita en el lado opuesto del tractor. • • • • Mu@vase hasta el lado izquierdo de la cortadora e inserte un resorte de retenci6n grande (G) a traves del agujero del eslab6n delantero (E) detr&s de la escuadra de suspensi6n delantera (F). tnserte el otto extremo del eslab6n (E) en el agujero de Iaescuadra derecha de lacortadora de c_sped (H) y asegure con una arandela y un resorte de retenci6n pequeSo (J), NOTA: Requiere levantar la plataforma. 9. INSTALE LA CORREA EN LA POLEA DEL EMBRAGUE DEL MOTOR (M) Cortadora Agujero U. 8. • • Desenganche la varilla tensora de la correa (K) de la escuadra de bloqueo (L). • Instale Ia correa en la polea del embrague del motor (M) De C@sped INSTALE EL ESLABON DELANTERO (E) Gire el volante hasta ubicar las ruedas derechas en posici6n de avance. Desde ta parte delantera del tractor, inserte el extremo de varilla del eslab6n delantero (E) a trav_s del agujero deiantero de la escuadra de suspensi6n delantera del tractor (F). Ubicaci6n De] Eslab6n DeJantero, • /" i M. Polea De Embrague De! Motor tMPORTANTE: Verifique que la trayectoria de Ia correa sea correcta en todos los surcos de ta polea de la cortadora de c@spedy debajo de las cubiertas de mandril, _'_kA_ <I_:_U / ........i i / ..................... _,. Enganche la vadlla tensora de la correa (K) en la escuadra de bloqueo (L). _ PRECAUCI6N: la varillatensora de la corfea estb accionada por resorte. Sostenga la vari]la firmemente apretada y eng&nchela Ientamente. • Eleve la palanca de levantamiento del accesorio hasta la posici6n m&xima. ° Si es necesado, ajuste las rueditas del calibre antes de poner en funcionamiento la corta_]0ra_ooYn0se ilustrae5 el eapitu!6 de M_iiej6 de este manual. PARA REEMPLAZAR LA CORREA DE LA SEGADORA Realice e[ procedimiento descrito en "PARA REEMPLAZAR LA CORREA DE LA CUCHILLA DE LA SEGADORh_' deI capitulo de Servicio y Ajustes de este manual. M. Polea Del Motor 46 REV|SION DE LA PRESION DE LAS LLANTAS Las Uantas en su unidad fueron infiadas demasiado en fa f&bdca pot razones de envto. La presi6n de fas Ilantas correctas es importante para obtener el mejor rendimiento en el torte. • Reduzca la presi6n de los neum&ticos a la PSI que se indica en estos. JLISTA DE REVISION Antes de operar y de disfrutarde su tractor nuevo, le deseamos que reciba el meior rendimiento y la mayor satisfaccion de este producto de calidad. Haga el favor de revisar la lista a continuacion: J' Se hart completado todas las instrucciones de montaje. J'No quedan partes sueltas en la caja de cart6n. REVISION DE LA NIVELACION DEL CONJUNTO Para obtener los mejores resultados en el corte, la caja de la segadora tiene que estar nivelada en la forma adecuada. Vea "PARA NtVELAR LA CAJA DE LA SEGADOR!_' en la secci6n de Servicio y Ajustes de este manual. REVISION DE LA POSICION ADECUADA DE TODAS LAS CORREAS Vea las figuras que aparecen para cambiar las correas de impulsi6n de la cuchilla de la segadora y de movimiento en Ia secci6n de Servicio y A)ustes de este manual. Verifique que tas correas s_gansu paso correcto. REVISION DEL SISTEMA DE FRENOS Una vez que usted haya aprendido a manejar su tractor, verifique que el freno funcione correctamente. Ver "PARA VERIFICAR SI FUNCIONA BIEN EL FRENO" en el capitulo de servicio y ajustes de este manual. J La bateria est& preparada y cargada en forma adecuada. J El asiento ha sido ajustado en forma c6moda y apretado en forma segura. J'Todas las Ilantas han sido infladas en forma adecuada. (Para fines de env{o, tas ltantas se inflaron demasiado en la f&brica,) v_AsegQrese que el conjunto segador est_ nivelado en forma adecuada, de lado a lado y desde adelante hacia atr&s, para obtener los mejores resultados en el corte. (Las Ilantas tienen que estar infladas en forma adecuada para la nivelaci6n.) J Revise las correas de impu]si6n y de la segadora. Aseg_rese que recorran el paso adecuado alrededor de las poleas y dentro de todos los fijadores de las correas. #' Revise el alambrado. Fijese que todas las cortex|ones todavia est@nseguras y que los alambres est@nsujetos en forma adecuada. #" Antes de conducir el tractor, aseg_rese que el control de rueda libre este en la pomcLon de 'transmisi6n enganchada" (Vea "PARA • TRANSPORTAR" en la secciOn de la Operaci6n de este manual). AI mismo tiempo que aprende a como usar su tractor, presto atencion extra a los puntos de importancia que se presentan a continuacion: J El ace|re deI motor tiene que Ilegar al nivel adecuado, _/El estanque de combustible tiene que estar ileno con gasolina sin plomo regular, nueva y limpia, J Familiaricese con todos los controles - su ubicacibn y su funci6n. Op6relos antes de hacer arrancar el motor. J Asegfirese que el sistema de frenos est@en ......_unacorld!c!6rld.e o_eraci6n segu_"_. .......................... J" Asegurarse de que el Sistema de Presencia del Operador y el Sis_ema de Funcionamiento Atr&s (ROS) funcionan de modo adecuado (Vet las Secciones de Funcionamiento y Mantenimiento en este manual). _/Es importante purgar la transmisi6n antes de operar su tractor por la pdmera vez, Siga las instrucciones adecuadas para el empiezo y para purgar (Vea "PARA EMPESAR EL MOTOR" y "PARA PURGAR LA TRANSMISION" en la secci6n de Ia Operacibn de este manual, .... 47 Estos simbolos pueden aparecer sobre su tractor oen la literatura proporoionadacon e] products. Aprenda y comprenda sus significados. R MARCHA N ATRAS 6 NEUTRO H ALTO I'xl L ESTRANGULACION SAJO R,_PIDO LENTO = MOTOR APAGADO MOTOR S|STEMA ENGENDIDO FUNCIONAMIENTO ATR/_S(ROB) MOTOR FRENODE ENMARCHA ESTACIONAMIENTO ALTURADE LA LEVA_JTAMIENTO SEGADORA DELASEGAOORA o,oooo LUCES ENSENDIDAS COMBUSTIBLE SATERIA MARCHA MARCHA PALANCADE MANDO PEDALDE FRENO/ ATRAS HACIAADSLANTE CRUCERO DE EMBRAGUE ACCESORIOOSL EMSRAGUE ENGANCHAOO ACCESORIOeEL PELIGRO,GUARDELAB EMSRAGUE MANESY LOS PIESLEJOS MANTENGAEL PELIGROSDE OESENGANCHADO AREADESPEJADA PENDIENTES (VealasecciSn6e las teg]asdesegurid_d) PEBGRO muerte indica un petigro que, si no se evita, provoea o lesiones graves. ADVERTENCIA que,graves, si no se evita,. puede provocar indica muerteunopeligro lesiones RUEDA LIBRE (Bo!_mente ;sara los mo_eIos automatics) PRECAUCION un peligro si no se evita, puede provocarindica leslones ngerasque, o moderadas, PRECAUCION cuando ss utiliza sin el simbole de aviso, tractor yto al motor. indica una situaci0n que puede prsvocar da_os al No seguir las siguientes instrucciones puede provocar herJdaso muerte. Los _='='='='='='='='=_ SUPERFICIES CALIENTES indica un peligro que, ,,_t_,, si no se evita, puede provocar la musrte, lesiones ="""graves yfo danes a la m._qulna. simbo[os de aviso de seguridadse utilizan para identificar informaciones de seguridad /_11_5. relativas a peligros que puedenprovocar la _ muerte, heddas graves y/o daSos a la mdquina:. FUEGO indica un peligro que, si no se evita, puede provocar la muerte, lesiones graves y/o danes a la mdquina. 48 FAMILIARICESE CON SU TRACTOR LEA ESTE MANUAL Y LAS REGLAS DE SEGURIDAD ANTES DE OPERAR SU TRACTOR Compare las ilustraciones con su tractor para familiarizarse con las ubicaciones de los diversos controles y ajustes. Guarde este manual para referencia en el futuro. Nuestros tractores cumplen con los est_.ndares de seguridad de1 American National Standard Institute. (A) PALANCA DEL LEVANTAMIENTO DEL (H) INTERRUPTOR DE LA LUZ - Enciende y ACCESORIO - Se usa para levantar, bajar y apaga las luces delanteras, ajustar el conjuntosegador o los dem&sacoeso(J) PALANCA DE MANDO CRUCEROdos montados en su tractor, Se utiliza para fijar el rnovimiento hacia adetante , (B) PEDAL DEL FRENO-Se usa para frenar el del tractor a la velocidad deseada sin apretar el tractor y para hacer arrancar el motor. pedal de marcha atr_.s. (C) PALANCA DEL FRENO DE ESTACIONA(K) PEDAL DE MARCHA ADELANTEMIENTO - Asegura el pedal deI embrague/freno Se utiliza para et movimiento de1 tractor hacia en la posici6n del freno, adelante. (D) CONTROL DE ACELERACION/ESTRAN(L) PEDAL DE MARCHA ATRAS --GUL-AClON=_-Se-usaparahacer arrancar y-.Se utitiza para el movimiento-dei-tractor-.hacia ........ controlar la velocidad del motor. atr&s. (E) INTERRUPTOR DEL EMBRAGUE DELAC(M) CONTROL DE RUEDA LIBRE - DesenCESORIO - Se usa para enganchar las cuchillas gancha ]a trans-misi6n para empujar o arrastrar segadoras, o los dem&s accesorios montados en ientamente el tractor con e] motor apagado. su tractor. (P) DISPOSITIMO DE AMISO DE SERVICIO / (F) INTERRUPTOR DE IGNIC|6N - Se usa para CRONOMETRO - tndica cu_.ndo hay que hacerhacer arrancar o hacer parar el motor. les el servicio al motor y a Ia cortadora. (G) SISTEMA DE FUNOIONAMIENTO HACIA ATRAS (ROS) en posici6n "ON" - Permite la operaciSn deI conjunto segador o otro accesorio accionado mientras queen rev_s. 49 La operaci6n de cualquier tractor puede hacer que salten objetos extrafios dentro de sus ojos, Io que puede producir dafios graves en 6stos. Siempre use anteojos de seguridad o protecoiones para los ojos rnientras opere su tractor o cuando haga ajustes o reparaciones. Recomendames galas de seguridad o una mfiscara de visi6n amplia de seguridad uSada sobre las galas. COMe USAR SU TRACTOR PARA AJUSTAR EL FRENO DE ESTACIONAMIENTO Su tractor viene equipado con un interrupter sensor que exige la presencia del operador. Cuando el motor est& funcionando, si el operador trata de bajarse del asiento sin primero aplicar el freno de estacionamiento, se apagar& el motor. 1. Presione el pedal (B) del freno completamente y sostengale. 2. Jale hacia arriba la palanca de! freno de mane (C) y mant6ngala en esa posici6n; suelte gradualmente el pedal del embragueifreno (B), y luego suelte la palanca del #eno de mane. El pedal tiene que quedar en Ia posici6n de freno. AsegBrese que el freno de estacionamiento va a sujetar el tractor en forma segura. AVISO:Si no se mueve la palanca de mando entre la posici6n de velocidad media y mztxima (rfipida), antes de pararse, se puede causar un "retorno de llama" del motor. • Gire la tlave de ignici6n (F) a la posici6n de apagado "STOP" y remueva la Ilave aI abandonar el tractor para evitar el use no autorizado. • Nunca use Ia estrangulaci6n para parar el motor. IMPORTANTE: Dejando el interrupter de la ignici6n en cualquier posici6n otra que "STOP" causar i qua la bateria se descargue (muerta). AVISO: Bajo ciertas condiciones, cuando el tractor est& parade con el motor andando en vacio, los gases de escape del motor caliente pueden hacer que el c6sped se ponga "car@." Para eliminar esta posibilidad, siempre pare el motor cuando pare e] tractor en fireas con c6sped. _I_PRECAUCI6N: Siempre pare el tractor completamente, seg_n se ha descrito antedormente, antes de abandonar la posici6ndeI operador. PARADA CUCH]LLAS • DE LA SEGADORA - Mueva el interrupter deI embrague sorio a la posici6n desenganchado gaged O). (I) Interrupter del Embrague del Accesorio Estire Para "Enganchar" deI acce(disen- (O) Posici6n de "Desenganchado" (Disengaged) !MPULSION DE RECORRIDO * Para parar el mecanismo impulsor, presione e] pedal del freno completamente. MOTOR - PARA USAR EL CONTROL DE LA ACELERACION (D) Siempre opere el motor a una aceleraci6n completa. • Si el motorfuncionaa una velocidad inferiora la m_×ima (r&pida),su rendimiento disminuye, • Elrendimiento 6primo se obtienea la velocidad m_xima (r_pida), ° Mover la palanca (D) de mando entre la posici6n de velocidad media y mztxima (r&pida). 5O MOVERSE HACIA ADELANTE Y HACIA La gama de la altura de carte es de aproximaATRAS damente 1 a 4 pulgadas. Las alturas se miden La direcci6n y la velocidad de movimientos est_.n controlados par los pedales de marcha adelante y atr_s. 1. Poner en marcha el tractor y quitar el freno de maria. 2. Apretar fentamente el pedal marcha adelante (14)y atr__s(L) para iniciar el movimiento. M&s se aprieta el pedal y mayor es ta velocidad. desde el suelo a la punta de Ia cuchilla cuando el motor no est& funcionando. Estas afturas son aproximadas y pueden variar dependiendo de las condicionesdel suelo, de la altura det c_sped y del tipo del c6sped que se est& segando, * El c6sped promedio debe cortarse aproximadamente a 2-1/2 pulgadas durante la temporada frtay sabre 3 pulgadas durante los meses calurosos. Para obtener un c6sped mils saludable y de rnejor apariencia, siegue a menudo y despu_s de un crecimiento moderado. , Para obtener el mejor rendimiento de carte, el c6sped que tiene m&s de 6 pulgadas de altura debe segarse dos veces. Haga el primer carte relativamente alto; el segundo a la altura deseada. PARA AJUSTAR LAS RUEDAS CALIBRADORAS Las ruedas calibradoras estbn bien ajustadas cuando se encuentran un poco a distancia del terreno al mismo tiempo que la segadora est6 a la altura de carte deseada. Entonces las ruedas calibradoras mantienen el conjunto segador en posici6n para prevenir el carte raspeo en casi todos los terrenos. AVISO: Ajuste las ruedas calibradoras con el tractor en una superficie nivelada plana. 1. Ajuste la segadora a la altura de carte deseada con la manilla de ajuste de altufa (Vea "PARA AJUSTAR LA ALTURA DE CORTE DE LA SEGADORi_' en la secci6n de Operaci6n de este manual). 2. Con Ia segadora a la altura deseada para Ia posici6n de carte, se tienen que nlontar ias ruedas calibradoras de maria que queden un poco sabre el suelo. Instale las ruedas calibradoras en el agujero adecuado con el perno con resalto, la arandeta de 3/8, y la tuerca de seguridad de 3/8-t6 y apri_,telos en farina segura. 3. Repita el procedimiento para el lado opuesto instalando la rueda catibradora en et mismo agujero de ajuste. UTILIZAR EL MANDO CRUCERO El mando crucero se puede utiUzar s6Io durante la marcha hacia adelante. CARACTERiSTICAS TECNICA8 El control de velocidad crucero s61odebe usarse mientras el tractor est6 en labores de siega o transportaci6n, movi6ndose sabre superficies que est6n relativamente planas y rectas. Otras condiciones de trabajo, coma Ia poda, que requiere velocidades bajas, podriandesengranar el control de velocidad crucero. No emplee el control de velocidad crucero mientras el tractor se desplaza par elevaciones, terrenos escarpados o mientras el tractor est@en Iabores de poda o virando. 1. Con el pedal (14)de marchaadelante apretado a Ia velocidad deseada, mover la palanca de mando de crucero hacia adelante hasta la posici6n "SET' y mantenerla mientras se levanta el pie del pedal, tuego soltar la palanca (J) de mando de crucero. Para desconectar el mando de crucero, e pujar Ia palanca hacia atr&s en fa pasici6n "OFF", o apretar completamente et pedal det freno. PARA AJUSTAR LA ALTURA DE CORTE DE LA SEGADORA __Laposici6.nde la patancaelevadora (B)determina a qu_ altura se cortar&el c@sped. • Coloque la palanca elevadora en la ranura de ta altura deseada. 51 PARA OPERAR LA SEGADORA Su tractor "_iene equlpada con un interruptor sensor que exige la presencia del operador. Si el motor est& funcionando y el ernbrague deI accesodo est& enganchado y el operadortrata de bajarse del asiento, se apagar_, el motor. Tiene que mantenerse sentado cornpletay centralmente en el asiento para impedir que el motor vacile o se apague cuando se opere su equipo en terreno disparejo, _spero o en cerros. 1. E]ijaa qu_ aitura cortar_,el c_sped por rnedio de la palanca elevadora. 2. Haga arrancar las cuchillas de la segadora enganchando el control dee ernbrague del accesorio. PARA PARAR LAS CUOHILLAS DE LA SEGADORA- desenganche el control del embrague deI accesorio. _ILPRECAUCI6N: No opere la segadora sin, ya sea, el recogedor de c6sped completo en las segadoras asi equipadas o con la proteccibn contra Ia descarga en su lugar. PARA OPERAR EN CERROS _IbADVERTENCIA: No maneje hacia arriba o haw cia abajo en cerros con pendientes superiores a t 5 ° y no rnaneje atravesando ninguna pendiente. Utilice la guia de la pendiente proporcionada en la parte posteriora de este manual, ° Escoja Ia velocidad m&s lenta antes de arrancar hacia arriba o hacia abajo en eerros, • Evite parar o carnbiar ta velocidad en cerros. • 8iesabsolutarnentenecesarioelparar, ernpuje el pedal de freno r_.pidamente a la posici6nde freno y enganche el freno de estacionamiento, • Para volver a ernpezar con el movirniento, suelte lentamente, el frenode estacionamiento -y el.pedal de freno • Apretar despacio el pedal apropiado basra Ia posici6n m&s lent& • Gire siempre lentarnente. 52 FUNCIONAMIENTO ATRAS Tu tractor es_ equipado con el Sistema de FuncionamientoAtr&s (ROS). Cualquier tentativa de] operador de viajar rnarcha atr_tsconel embrague puesto apagar& el motor a rnenos que ]a Ilave de ignici6nse ponga en la posicibn de "ON" ,deIROS, ATENCION: Ir marcha atr_,s con el embrague puesto para cortar, no es recomendable, Poniendo et ROSen posici6n "ON", para perrnitir el funcionamiento atr&s con el ernbrague puesto, se tiene que hacer s61o cuando el operador ]o considera necesario para reposicionar la rn_.quina con el dispositivo ernbragado. No siegue en rev_s a menos que sea absolutamente necesario. USAR EL SISTEMA DE FUNCIONAMfENTO ATR_.S Utilice el tractor solamente si est_ seguro de que no ingresar&n niSos ni otras personas o anirnates al &tea donde se vaa cortar el c6sped. 1. Presionar el pedal freno hasta et rondo: 2. Con el motor en marcha, girar la Have del interruptor de la ignici6n en el sentido inverso al de Easagujas del reloj hasta Ia posici6n "ON". 3 Mire hacia abajo y hacia arras no s61o antes de ir marcha art&s, sino rnientras est@ yendo marcha atras. 4. Presione lentamente el pedal reverso de la impulsi6n para cornenzar el rnovirniento. 5. Cuando el uso deI ROSes m_s necesario, d@vue]ta a la llave de ignici6n en el sentido de Ias agujas del reloj hasta fa posiei6n "ON". ROS "ON" Position Engine "ON" Position (Normal Operating) PARA TRANSPORTAR Cuando empuje o arrastre su tractor aseg_rese de desenganchar la transmisi6n poniendo el control de la rueda libre en la posici6n de marcha de rueda tibre. El control de marcha d_= rueda libra esta situado en la barra de tracci6n trasera de! tractor, 1. Levante Ia palanca de Ievantamiento deI accesorio a su posici6n m&s a[ta, 2. Tire del mando de Ia rueda libre hacia afuera y hacia abajo hasta que se coloque en la guia y su_lta]o de manera que se mantonga en la posici6n de desenganchada. • No empuje o arrastre el tractor a m_s de dos (2) MPH. • Para volver a accionar ]a transmisi6n, invierta este procedimiento, ANTES DE HACER ARRANCAR EL MOTOR REVISE EL NIVEL DE ACEITE DEL MOTOR El motor en su tractor ha sido enviado desde la _brica ]Ieno con aceite de calidad para verano. 1. Revise el aceite del motor con el tractor en terreno nivelado, 2. Destornille y remuevaIa tapaivarilIaindicadora de nivel de relleno de aceite, limpie el aceite, Vuelva a insertar la varilla indicadora de nivel en el tubo, y haga descansar la tapa deI relIeno del aceite en el tubo. No enrosquela tapa en el tubo. Remueva y lea el nivel del aceite. Si es necesario, agregue aceite hasta se Ilegue a la mama de lleno (FULL) en la varilla indicadora de nivel, No 1o Ilene demasiado, • Para la operaci6n en clima fdo, debe cambiar Transmisi6n Enganchada el aceite para poder arrancar m&s f&cilmente (Vea "Tabla de Viscosidad Del Aceite" en la secci6n de Mantenimento de este manual). • Para cambiar el aceite de1motor, vea Ia secci6n de Mantenimiento en este manual, AGREGUE GASOLINA • Llene el estanque de combustible. Llene hasta Ia parte inferior del cuello de relleno del estanque de gasolina. No lo llene demasiado, Use gasolina regular, sin pLomo,nueva y limpia Transmisibn Desenganchada con el mi'nimo de 87 octanos. (El uso de gasoliAVISO: Para proteger el cap6 contrael daSo na con plomo aumentar& los depOsitos de 6xido cuando transporte su tractor en un cami6n o rede plomo y carbonoy se reducir& la duraci6n de molcador, aseg0rese que el cap6 est6 cerrado Isv&Ivula). No mezcle el aceite con la gasolina. y asegurado al tractor, Use los medios apropiaPara asegurar que la gasolina utilizada sea dos para amarrar el cap6 al tractor (cuerdas, fresca compre estanques los cuales puedan cordeles, etc.), set utilizados durante los primeros 30 dias, REMOLQUE DE CARRETILLAS O OTROS _PRECAUCI6N: Limpie el aceite o el combustible derramado, No almacene, derrame o use ACCESORIOS gasolina cerca de una llama expuesta. Remotque solamente los accesorios recomendaIMPORTANTE: Cuando se opere en temperados y especificados por el fabricante del tractor, Use sentido com0n cuado este remolcando. Las turas per debajo de 32°F (O°C) use gasolina de inviemo limpia y nueva para auedar a asegurar cargas pesadas, cuando este yendo sobre una un buen arranque en clima fdo. pendiente, son peligrosas, tas llantas pueden PRECAUClON: Combustibles mezclados con perder su traccibn con el terreno y pueden ocaalcohol (conocidos como gasohot, o el uso de sionar que pierda el control de su tractor, etanof o metanol) pueden atraer la humedad, MECANISMO DE AVISO DE SERVICIO / ]a que conduce a ta separaci6n y formaci6n de CRONOMETRO &cidos durante el almacenamiento. La gasolina Elrecordatedode servicio muestraeln0merototal acfdica puede dafar el sistema del combustible de boras de funcJonamiento del motor e indica de un motor durante el almacenamiento. Para el momento en que el m0tor o ia corta.dora__de-_--evitarlos pr651emascon el m0t0r, so debe 9aciar ....... c6sped necesita mantenimiento. Despu6s de cada el sistema de combustible antes de guardarlo por 50 horas de funcionamiento, el icono de Iata de un periodo de 30 dias o m&s. Vacie el estanque aceite permanece encendido durante 2 horas o de combustible, haga arrancar el motor y h&gafo hasta que se reaiiza el restablecimiento manual. funcionar hasta que Ias lineas del combustible y el Para restablecer la pantalla manualmente, gire el carburador queden vacios. La pr6xima temporada interruptor de arranque ala posici6n de encendido use combustible nuevo. Vea Ias Instrucciones y despu_s a Ia de apagado cinco veces (1 para el Almacenamiento para m_.s informaci6n. segundo encendido, 1 segundo apagado), Para Nunca use productos de limpieza para el motor o el mantenimiento del motor y de ta cortadora de para el carburadoren el estanque deI combustible c6sped, consulte ta secci6n Mantenimiento de pues se pueden producir daSos permanentes. este manual. NOTA: El recordatorio deservicio se activacuando la Ilave de contacto est& en cualquier posici6n que no sea "STOP". Para una lectura precisa, la Ilave debe permanecer en la posici6n "STOP" cuando el motor no est& en marcha. 53 PARA HACER ARRANCAR ELMOTOR AI hacer arrancar el motor pot la primera vez o si se ha acabado el combustible del motor, se necesitar& tiempo para el arranque extra para mover el combustible desde el estanque hasta el motor. I, 2. Asegt3rese clue el control de rueda libra este en la posici6n enganchada. Si_ntase en el sUl6n en la posici6n de operaci6n, suelte el pedal de]freno y pongael freno de estacionamiento. 3. Muevael embrague deI accesodo a laposiciSn desenganchado. & Mueva {apalancade control de la aceleraci6n a [a posici6n de estrangutaci6n. AVlSO: Antes de arrancar, lea las instrucciones siguientes para el arranque en clima fdo y templado. 5. CALENTAMIENTO AUTOMATICA PARA LA TRANSM[SION Antes de conducir la un[dad en un tiempo frlo, la transmis[6n debeser calentada como las instrucciones siguientes: 1. Aseg_rese que el tractor este situado en una superficie nivelada. 2. AIMe el freno de estacionamiento y deje que el freno vuelva a Ia posicibn de operaclon. 3. Permitaque Iatransmisi6n se caliente durante un minuto. Esto puede ser echo durante et tiempo de calentamiento deI motor. • Los accesorios pueden ser utilizados durante el periodo del recalentamiento del motor despu#s que latransmisi6n halIasido calentada. AVISO: Si se encuentra a mucha altura (sobre 3000 pies) o en clima frio (por debajo de ;32°F [0°C]), la mezola deI combustible del carburador debe set ajustada para el mejor rendimiento det motor. (Vea "PARA AJUSTAR EL CARBURADOR" en ta secci6n de Servicio y Ajustes de este manuel). lnserte laIlave en ta ignici6ny gire {a llave en el sentido qua giran las manillas del reloj a la posicibn de arranque start, y suette la Ilave tan pronto como arranque el motor. No hagafuncionar el arrancador continuamente por m&s de quince segundos por minuto. Si el motor no arranca despu@sde ratios intentarlos,mueva el control de la aceleracibn a ]a posici6n de r&pido, espere unos cuantos minutos ytrate de nuevo. Si el motor sigue sin funcionar, mueva el control de la aceleraci6n a la posici6n de estrangulacibn y intente de nuevo. ARP_ANQUE CON TIEMPO TEMPLADO (50° F/10°C y m&s) 6. Cuando arranque el motor, mueva el con_'o] de la aceleraci_n a la posici6n de r&pido. • Los accesorios y eI embrague ahora pueden ser utilizados. Si el motor no acepta esta carga, vuelva a arrancar el motor para permitirle qua se caliente pot un minuto utilizando el estrangulador como describido arriba. ARRANQUE CON TIEMPO FRiO (50° F/10°C y menos) 6. AI hacer arrancar el motor, rnantenga el control de la aceleraci6n a la posici6n de estrangulaci6n hasta que el motor se caliente y empieze funcionar real. Una vez clue empieze a funcionar maI, mueva inmediatamente e[ -contrordela aceleraci6nafa poslci6nr&pid_. El calentamiento del motor puede tomar a partir de ratios segundos a varios minutos (cuanto m&s fria es ta temperatura, m&s targo es el calentamiento). 54 PURGAR LA TRANSMISION _I, PRECAUCI6N: Nunca enganche o desenganche la palanca del control de rueda libre cuando el motor esta funcionando. Para asegurar ia operaciSn y ejecuci6n adecuada, es recomendado que la transmisi6n sea purgada antes de operar el tractor para la primera vez. Este proceso remover& cualquier aire adentro de ta transmisi6n que se halta formado durante el transporte de su tractor. IMPORTANTE: Si poracaso sutransrnisi6n debe set removida para servicio o reempiazo, debe ser purgada despu_s de la reinstalaci6n y antes de operar el tractor. 1. Para mayor seguridad, ubique el tractor en una superficLe nivelada, despejada de cuaIquiet objeto y abierta, con el motor apagado y el freno de mane puesto. 2. Desenganche Ia transmisi6n poniendo el control de rueda libre en ]a posici6n de desenganchado (Vea"PARA EL TRANSPORTE" en esta seccibn de este manual). 3. Sentado en el asiento deI tractor, empiece el motor. Despu_s que este corriendo et motor, mueva el control de estrangu[aci6n a la posici6n de lento. Quitar el freno de mane. _I_PRECAUCI6N: En el transcurso deI paso 4, puede que de pronto se pongan en movimiento Ias ruedas. 4. Apretar el pedal de marcha adelante hasta el rondo, mantener per cinco (5) segundos y soltar el pedal. Apretar el pedal de marcha atr&s hasta el fondo, mantener per cinco (5) segundos y soltar el pedal. Repetir el procedimiento tres (3) veces. 5. Apague el motor y embrague el freno de estacionamiento. CONSEJOS PARA SEGAR • No se pueden usarlascadenas para IasIlantas cuando Ia caja de Ia segadora est& adjunta al tractor. • La segadora debe estar nivelada en forma adecuada para obtener ef meier rendimiento al segar. Vea "PARA NIVELAR LA CAJA DE LA SEGADOR_' en Ia secci6n de Servicio y Ajustes de este manual. • El lade izquierdo de Ia segadora se debe usar para recorte. • Maneje de mode que los recortes se descarguen en el &tea que ya ha side cortada. Mantenga et _,rea de corte a Ia derecha det tractor. Esto producir,_ una distribuci6n m&s pareja de los recortes y un corte m&s uniforme. • AI segar las &rea grandes, empiece girando a ta derecha de mode que los recortes se descarguen, a[ej_.ndose de los arbustos, cercos, entradasde autom6viles, etc. Despu@sde una o dosvueltas, siegue en Ia direcci6n opuesta, haciendo virajes a la izquierda, hasta que termine, f • Si el c_sped est& demasiado alto, se debe segar dos veces para reducir la cargay los posibles petigros de incendio debido a los recortes secos. Haga el primer corte relativamente alto; el segundo a la altura deseada. 6. Enganche la transmisi6n poniendo el control • No siegue el c@spedcuando est& mojado. El de rueda l]bre en la posici6nde conducir (Vea c@spedmojado taponar& la segadora y dejar& "PARA TRANSPORTAR" en esta secci6n de] montones indeseables. Permita que se seque manual). el ceSspedantes de segarlo. • Siempre opere el motorcon una aceleracibn 7. Sentado en el asiento del tractor, empiece el completa euando siegue para asegurarse motor. Despu_s que este corriendo el motor, de conseguir un mejor rendimiento y una mueva el control de estrangulaci6n media descargaapropiada de los materiales. Regule (1/2) velocidad. Quitar el freno de mane .8,=-Conduzca =su-tractor hacia adelantedurante ............]a=.ye!oc!.dad.=.de t'ecor=[!dose!ecc!or}.ando_u=n"....... aproximadamente cinco pies y entonces hacameto to SUT=c_entemente Da]o para o[_[ener cia marcha atr_,scinco pies (150 cm). Repita un rendimiento de corte de parte de su segaeste proceso tres (3) vecos, dora y tambi@n la calidad del corte deseada. • Cuando opere con accesorios, seleccione una Su transmisi6n esta ahora purgado y dispuesto velocidad de recorrido que se acomode al terpara la operaci6n normal, reno y Ie permita obtener el mejor rendimiento del accesorio que se est,. usando. 55 PROGRAMA DE MANTENIMJENTO R_'vlsat la oper_;i_n Revlsa¢ la. presld_ A_SDE CADAUSO de_ _O _,_m_ur el{es_lsm_ "'V d RO_ V _ ...................... C_rl3_['_' el _ai_s '_11 i_l_l_lSi _ del ._OtO_ dal m_tor {_o_ _) d_I {_II'_ rp_O_O' _ll= ii _ V _ V ) 0 u._.,=.,,o,_,,_.,........ ,_,,,_ T V_ la r_l_ila kle ai_e i l_-_PeCdC_ R !amad_da_ el s=le_cJ_,dor! .... LJmpi_ _ 13_ _ Carr, blat dol a_'it ;_MPORAO_ _ ' ...... _J niv_ ......... HOP_S uu R_sar O ' CAR ...... .im M CADA _S V de la._ H_nf_as T V_ri_z bcom_d_ _eprd,_er,,c= R C_ _OP_S de r.h_pas ,,, ,,H RECOMENDACIONES GENERALES La gar_ntia de este tractor no cubre los arficulos que han estado sujetos al abuso o a Ia negligencia de[ operador, Para recibir todo el valor de la garantia, el operador tiene que mantener Ia segadora segt3n las instrucciones descritas en este rn anual Hay algunos ajustes que se tierlen que hacer en TABLA DE LUBRICACION QPerno articulado deI volant m, .......... _ _._u_,u u_--_f/ \ 3j-_ Accesor_o de .............. _rasa del Arbol @ Aecesor'o__'_@ Accesor,o de forma peri5dica para poder rnantener su tractor ~ Grasa . . del _'_ 1%__-\_. __'_ de Grasa det Hooamlento de adecuadamente. I ' le _.___':_;__ "_ Rodamiento AI menos una vez cada estaci6n comprobar _e?a_e_a /'_'--_-/ r,_.. de la Rueda si es necesario efectuar los adjustes descritos _ _ '_\ "%r_ Delantera en las secciones de Servicio y Ajustes de este _ Pl_ncha / \-,./_ ... [_k_-.,/ --\ manual, def engranaje I_( _ _ "@Motor _Z_"_Una vez aI al%, cambie la bujia, limpieo.cam .......... de.Sector:de ...................................... bie e{ filtro de aire y revise si Ias cuchillas y las Direcci6n I I \ _ ; t" / I I _'_. . correas est&n desgastadas. Una bujia nueva y L.J _" --" ' L_ _eg_e_:_°r'° un filtro de aire limpio aseguran una mezcla de deI mandril H _-I- aim-combustible adecuada y le ayudan a que su motor funcione mejor y que dure m&s. ANTES DE CADA USO 1. Revise el nivel del aceJte del motor. 2, Revise la operacibn de los frenos. 3, Revise la presi6n de Ias Ilantas. 4. Verifique que el sistema de presencia deI operado y el sistema de] ROS funcionen adecuatamente. 5. Revise si hay sujetadores sueltos, F"_ • Grasa de proposito general @ Refi_rase a la secci6n del "MOTOR" en Mantenimiento IMPORTANTE: No aceite o engrase los puntas pivotes, los que tienen rodamientos de nil6n especiales. Los Iubricantes viscosos atraer&n polvo y mugre, Io que acortara la duracidn de los rodamientos auto-Iubricarse, use solamente un ]ubricante tipo grafito de polvo seco in forma moderada. 56 • Cuando el motor est& en marcha con el interruptor de Ilave del sistema de funcionam[ento atr&s (ROS) en la posici6n "ON" y el embrague del accesorio conectado, cualquier tentativa del operador de viajar marcha atr_s, NO apagar& el motor, CUIDADO DE LA CUCHILLA Para obtener resultados 6ptimos, las cuchil[asde Ia cortadora deben estar afiladas+Reemplace las chilIas que es_n gastadas, dobladas o dafiadas+ PRECAUCION: Usar solamente la hojas de repuesto aprobada pot el fabricante de su cortacL=sped. Usar una hoja no aprobada pot el fabricante de su cortac_sped es peligroso, puede dafiar su cortac@sped y anular su garantia. TRACTOR Siempre observe las reglasde seguridad cuando d_ mantenimiento. OPERACION DEL FRENO Si el tractor necesita m&s de cinco (5) pies para detenerse a la m&xima velocidad at camb[o mas alto en una superficie nive[ada, de hormig6n o pavimentada, hay que hacerle e[ servicio al freno. Vet "PARA VERIFICAR SI FUNCIONA BtEN EL FRENO" en el capitulo de Servicio y ajustes de este manual. LLANTAS • Mantenga todos los neum&ticos con la presi6n de aire adecuada (Vet la PSI que se indica en estos)+ • Mantenga las Ilantas sin gasolina, aceite o substancias qu[micas para control de insectos que pueden dafiar la goma+ • Ev[te los tocones, Ias piedras, las gdetas profundas, los objetos afiiados y otros peligros que pueden dafiar alas Ilantas+ AVISO: Para arreglar tas Ilantas perforadas y p_ra prevenir que tenga ltantas pinchadas a causa de pequefias fugas, puede comprar el sello para tlantas de su comerciante de partes de repuesto mils cercano+ Elsetlo previene que las Uantas se sequen y tambi6n ]a corros+on. SISTEMA PFIESENCIA OPERADOR Y SISTEMA FUNCIONAMIENTO ATRAS (ROS) Asegurarse de que el sistema de presencia del operador, el sistema de trabajo y el sistema funcionamiento atras funcionen bien+ Si tu tractor no funci6n corno descrito, reparar el problema inmediatamente. • El motor no arrancar& si el pedal de embragueifreno est_ completamente presionado y el mando del embrague det accesorio est& desconectado+VFcRIFI(_Z SISTEMA PRESENCIA OPERADOR REMOCION DE LA CUCHILLA 1. Levante la segadora a su posici6n m&s alta para permitir el acceso alas cuchil[as. AVISO: Proteja sus manos con guantes y/o envuelva la cuchilla con una tela gruesa. 2. Remueva el pemo de [acuchilla dandote vueltas en el sentido inversoal de lasagujas deI retoj. 3. Instate ta nueva cuchillao cuchilla afiladacon el estampado "THIS SIDE UP" en la direction de la segadora y del conjunto del mandril. IMPORTANTE: Para asegurar la [nstalacion apropiada, posicioneel agujero centra[ de la cuchilla con Ia estrella del conjunto del mandril. 4. Instale y apriete el perno de ta cuchilla firmemente (Par 45-55 pies!libras)+ IMPORTANTE: El perno de la cuchilta es tratado a calo. Si es necessario sust_uir los pernos, sus+ tituirlos s61ocon pernos aprobados mostrados en Partes de Reparaci6n. Conjuntod_l Mandril Cuchilfa ° Cuando el motor est& en marcha, cuatquier tentativa del operador de abandonar el asiento sin haber puesto el freno de estacionamiento primero, apagar_, el motor. • Cuando el motor est& en marcha y el embrague del accesorio est& conectado, cualquier tentativa deI operador de abandonar el asiento, apagar& el motor. Pemo de la Ouchilla nar nunca si el operador no est& en su asiento. Motor on posici6n Posici6n ROS "O N" (Operac (_n Norma "ON" ) [ I V_R]FIF.Z SISTEMA FUNCIONAM]ENTO ATRAS (ROS) • Cuando el motor est_ en marcha con el interruptor de Ilave en posicibnde motor "ON" y el embrague deI accesodo conectado, cualquier tentativa del operador de viajar marcha atrb.s, apagar,_ el motor. 57 BATERIA Su tractor cuenta con un sistema de carga de la bateria que es suficiente para el uso normal. Sin embargo, si se carga la bater[a peri6dicamente, con un cargador de autom6viles, se prolongar& su duraci6n. • Mantenga la bateria y los terminales limpios. • Mantenga los pernos de la bateria apretados. • Mantenga los agujeros de ventilaci6n peque5os abiertos. • Vuelva a cargar de 6-10 amperes pot 1 hora+ AVISO: La bateria del equipo original de su tractor no becesita servicio+ No intente abrir o remover las tapas o cubiertas. No esnecesar{o afiadir o verificar el nivel del electrblito. PARA LtMPIAR LA BATERiA Y LOS TERMINALES La corrosi6n y la mugre de la bateria y de los termina:les puoden producir "escapes" de potencia on la bateria. 1, Remueva la protecci6n de los terminales, 2, Desconecte el cable de la baterta NEGRO primero y luego el cable de ta bateda ROJO y remueva la bateria def tractor, 3. Enjuague la bater_a con agua corriente y s_quela. 4, Umpie Iosterminales y los extremos del cable de la bateria con un cepi]lo de alambro hasta que queden brillantes, 5, Cubra los terminales con grasa o parafina. 6, Reinstate la bateria (Vea "Reemplazar _a Bateda" en la secci6n de Servicio y ajustes de este manual), ENFRIAMIENTO DEL TRANSEJE Las aletas de enfriamiento y el ventilador de [a transmisi6n tienen que mantenerse limpios para asegurar el enfdamiento adecuado, No trate de limpiar el ventilador o la transmisi6n cuando el motor est@func[onando o mientras la transmisi6n est_ caliente. • Inspeccioneel ventilador de enfriamiento para asegurarse que las aspas del ventiladorest_n intactasy limpias. • Inspeccionelasa[etasdeen#iamientoparaverificar si hay mugre, recortes de c_sped u otros materiales, Para impedirdafios a ]asjuntas, no use un rociador de aire compresado o de alta presi6n para Iimpiar las aletas de enfriamiento NIVEL DEL FLU|DO DE LA BOMBA DEL TRANSEJE El transeie ha sido sellado en la f&brica y eJ mantenimiento dol f_uido no es necesario para la vida del transeje. En e] caso de queef transeje se filtrase o necesitase servicio, haga el favor de ponerse en contacto con un centro de servicio AVISO: A pesar de que los aceites de multiviscosidad(5W30, 10W30, etc,) mejoran el arranque en clima frio, estos aceites de multiviscosidad van a aumentar el consumo de aceite cuando se usan en tomperaturas sobre 32 ° F (0° C). Revise el nivel de! aceite del motor m&s a menudo, para evitar un posibledaSo en el motor, debido a que no tiene suficiente aceite. Cambie e] aceite despu6s de 50 horas de operaci6n o pot io menos una vez al afio si el tractor se utiliza menos 50 horas el aSo, Revise el nivel det aceite de] c&rter antes do arrancar el motor y despu6s de cada echo (8) horas de uso continuado. Apriete la tapa del retlenoivarilla indicadora de nivel del aceite en forma segura cada vez que revise el nivel del aceite. PARA CAMBIAR ELACEITE DEL MOTOR Determine la gama de Ia ternporatura esperada antes de cambiar el aceite, Todo el aceite debe cumpIircon Iaclasificaci0n de servicio API SG-SL. • AsegSrese que eltractor estL=en unasuperficie nivelada, ° Et aceite se drenar& m&s f_cilmente cuando est@caliente, • Recoja el aceite en un envase adecuado. 1. Remueva la tapa/vadlla indicadora do nivel para relleno del aceite. Tenga cuidado de no permitir que la mugre entre en el motor cuando cambie el aceite. 2, Deslice el accesorio de purgadel aceite desde la posicibn de ensamblaje en el alojamiento de la turbina deI motor y sep&re!o del motor. Posici6n de Extensor Ensamblaie de drenaje ..... Revise Ias correas V para vedficar si existe detedoro y desgaste despu6s de 100 horas de operaci6n y c&mbielas si es necesario, Las cor_ SearSCoRREAsO reas no con sonVun ajustables, otto centro Cambie de servicio lascualiflcado, correas si empiezan a deslizarse debido al desgaste. MOTOR ............................................................................................................................................................... ___squiWo__ ...... LUBRICACION Use solamente aceite de detergents de alta 3, Para abrido,gire Ia tapa hacia la izquierda. calidad clasificado con la clasificaci6nSG-SL 4, Unavez que hayavaciado completamente el de servicioAPI, Seleccione la calidad de viscoaceite, vuelva a colocar la tapa y girela hacia Sidad del aceite SAE seg_n su temperatura de [a derecha hasta el tope. operaci6n esperada. 5. Vuelva a fijar el accesorio de purga dsl aceite on el alojamiento de ta turbina del motor. 58 6. Vuelva a I]enar el motor con aceite a tray, s deI tubo de la varilla ind[cadora de nivel para relleno deI aceite. Vactelo lentamente. No Io llene demasiado. Para la capacidad aproximadavealas"Especificaciones del Producto" secci6n de este manual. LIMPIEZA DE LA REJILLA DE AIRE La rejilla de aire debe mantenerse sin mugre y paja para evitar et dafio al motor debido al sobrecalentamiento.Limpiela conuncepillode alambre o con aire comprimido para remover la mugre y las fibras de goma secas, pegadas. 7. Use un medidor en latapa/vadllaindicadora del nivel para reflenode lacoite para revisarel niveL Mantenga el aceite en la linea de lleno (FULL) en lavarilla indicadora de niveL Apriete latapa en e] tubo en forma segura ouando termine. LIMPIEZA DE LA ENTRADA DE AIRE/AREAS DE ENFR1AMENTO Para asegurar un enfriamiento adecuado, aseg0rese que ta rejilla del c_sped, tas aletas de enfriamiento, y otras superficies externas del motor se mantengan limpias en todo memento. Cada 100 horas de operacibn (m&s a menudo bajo condiciones extremadamente polvorosas o sucias), remueva Ia caja det ventilador y otras tapas de enfriamiento. Limpie las aletas de enfriamiento y Ias superficies externas, seg0n sea necesario. Aseg0rese que se vuelvan a instalar las tapas de enfdamiento. FILTRO DE ACEITE DEL MOTOR Cambie el filtro de aceite del motor carla temporada ovez por medio que cambie el aceite, si el tractor se usa m&s de 100 horas en un afio. FILTRO DE AIRE Su motor no va a funcionar en forma adecuada si usa un filtro sucio. Limpie el elemento del prefiltro de espuma despu_s de cada 25 horas de operaci6n o carla temporada. Dele servico aI cartucho de papeI cada 100 horas de operaci6n o carla temporada, lo que suceda primero. Dele servicio aI filtro de aire m&s a menudo bajo condiciones potvorosas 1. Remueva tas la cubierta. Para darle servicio al prefiltro. 2, L&velo en detergente liquido y agua. 3. S_quelo apret&ndolo en un paAo limpio. 4. Impregnar en aceite de motor. Envu_lvalo en un patio limpio y absorbente y apri6telo para remover et exceso de aceite. AMISO: Siesta sucio o dafiado reemplace el prefiltro. Para darJe servic[o al cartucho 1, kimpie el eartucho golpe&ndolo suavemente en una superficie plana. Si el cartucho esta muy sucio o dafiado c&mbielo. 2. Reinstale el cartucho deI prefiltro,la cubierta y aseg_relos. AVISO: Los solventes de petr61eo,tales como el kerosene, no se deben usar para limpiar el cartucho. Pueden producirel detedoro de este. No aceite el cartucho. No use aire de presi6n para Iimpiarlo o secarIo. ianilla--_ ,_ \_\"_\\ ........ _._j _ _ _ubierta f --_ AVISO: Si se opera ta m,_quina con una rejilla del c6sped bloqueada, sucia, o con las aletas de enfriamiento taponadas, yio las tapas de enfriamiento removidas se producir&dafio en et motor debido al calentamiento excesivo. SILENCIADOR Inspeccione y cambie el silenciador corroido y el amortiguador de chispas (si viene equipado) pubs pueden crear un peligro de incendio y/o daSos. eUJiA(S) Cambie tas bujia(s) al comienzo de cada temporada de siega o despu_s de cada 100 horas de operaei6n, to que suceda primero. El tipo de bujia y el ajuste de la abertura aparecen en "ESPECIFICACIONES DEL PRODUCTO" secci6n de este manual. FILTRO DE COMBUSTIBLE EN LINEA El filtro de combustible debe cambiarse una vez cada temporada. Si el filtro de combustible se tapona, obstruyendoel flujo del combustiblehacia el carburador, es necesado cambiado. 1. Con el motor frfo, remueva el filtro y tapone Ias secciones de la linea de combustible. 2. Ponga el filtro de combustible nuevo en su posici6n en ]a Iinea de combustible con la flecha ser_alando hacia el carburador. .,._ 3. AsegSrese de que no hayan fugas en la t/]}_//] linea deI combustible y que las grapas est_n ........................................................ colocadas enformaadecuada: ............................................. 4. Inmediatamente limpie toda la gasolina derramada. Cartucho Abrazadera __.._._.. Espuma 59 Abrazadera LIMPIEZA 3, • Limpie todo material extrafio deI motor, ]a bateria, el asiento, el pulido, etc. • Limpie los desechos de la placa guia. Los desechos pueden Iimitar el movimiento del eje del pedal del freno/embrague, Io que har& que patine la correa y que se pierda la tracci6n. _PREOAUC!6N: Evite todos los puntos de enganche y las piezas m6viles. 4, Enrosque el adaptador de la boquilla (empaquetado con el manual dei operador del tracto o en el extreme de la manguera del jardfn. Eche hacia atr_.s la abrazadera de cierre del adaptador de Ia boquilla y empuje _ste en el puerto de lavado de [a cubierta en et extreme izquierdo de la cubierta de la segadora. Suelte la abrazadera de cierre para fijar el adaptador en Ia boquilla. Pedal Del Pue_o de Lavado Adaptador de Placa De \ _]L PRECAUCION; dnLPUNTOS DE ENGANCHE IMPORTANTE: Tire de la manguera para asegurarse de que la conexi6n est,_ bien fija. SISTEMA DE DIRECCION, SALPICADERO, GUARDABARRO8 Y SEGADORA NO MOSTRADOS • • Mantenga lassuperficies pulidasy las ruedas sin derrames de gasolina, aceite, etc. Proteja las superficies pintadas con cera ripe automotriz. No recomendamos que se utilice una manguera de jardin o agua a presi6n para Iimpiar el tractor a no set que el motor y la transmisi6n est@n cubiertos para protegerlos deI agua. El agua en el motor y la transmisi6n acortan Ia vida 6til del tractor. Utilizar airs comprimido o un sop]ador de hojas para remover hierba, hojas y basura del tractor y cortac_spedes. PUERTO DE LAVADO DE LA CUBIERTA La cubierta de su tractor est_ equipada con un puerto de lavado sobre la superficie que forma parts deI sistema de lavado de la cubierta. Se deberia utilizar cada vez que se haya usado eltrac_or. 5. Abra ]a Ilave del agua. 6. Desde la posici6n del operador del tractor, vuelva a arrancar el motor y ponga la palanca de aceleraci6n en la posicibn rApido ("_1('), IMPORTANTE: Vuelva a comprobar la zona para asegurarse de que est& despejada. 7. Mueva elcontrol de[ embrague del accesorio a la posici6n "ENGANCHAR'. Mant6ngase en la posici6n del operador con lacubierta de corte acoplada hasta que la cubierta est6 Iimpia. 8. Mueva elcontrol del embrague del accesodo a la posici6n "DESENGANCHADO". Gire lagave de encendido a Ia posicibn STOP para apagar el motor det tractor. Cierre la llave del agua. 9. Tire hacia atr&s la abrazadera de cierre de{ adaptador de la boquilla para desconectar el adaptador del puerto de lavado de la cubierta. 10. Ueve el tractor a una zona seca, preferenteJ__.LI.e__..el= tractor .a un_luga[ horizontal _y................. mente de-cemente e-pavimentada;- Mueva ..... despejado de su c@sped, Io bastante cerca el control del embrague del accesorio a Ia de una boca de riego come para que Ilegue posici6n "ENGANCHAR" para quitar el exIa manguera def jardin. ceso de agua y ayudar a que se seque antes de guardar e] tractor. tMPORTANTE: AsegSrese de que la boca de descarga del tractor est& orientada LEJOS de _ADVERTENOIA: S! el aeoesorio de lavado su oasa, garaje, coches aparcados, etc. Quite est,, rote o no est&, Ud. y otras personas esla boca de ensacado o cubierta de mantillo si tar_n expuestos a q ue la hoja les lance aquello s est& acoplada. objetos con los que entre en contacto. • Sustituya inmediatamente el accesorio de 2. Mueva et control del embrague del aocesorio lavado rote o que falta antes de volver a a la posicibn"DESENGANCHADO", pong a el usar la segadora. freno de estacionamiento y apague el motor. - Tape todos los orificios de la segadora con pernos y tuercas de seguridad. 60 ADVERTENCIA:PARA EVITAR LESIONES SERIAS, ANTES DE DAR CUALQUIER SERVI CIO O DE HACER AJUSTES: 1, Presione el pedal de[ embrague/freno completamente y aplique el freno de estacionamiento, 2. Ponga la patanca de control de movimiento en ]a posici6n de neutro, 3. Ponga el embrague del accesorio en la posici6n desenganchado (DISENGAGED). 4, Ponga ta llave de lgnici6n en la posici6n de apagado (STOP) y remu_vala. 5. Aseg_Jreseque _ascuchi_as y que t_das _aspar_esm_vib[es se hayan dstenid_ _mp_etamente_ 6, Desconecte el alambre de la bujla y p6nga]o en donde no pueda entrar en contacto con _sta, PARA DESMONTAR LA CORTADORA DE CESPED 1, Ponga el embrague deI accesorio en la pceici6n "DESENGANCHADO", 2. Haga segadora descender a su posici6n m&s baja, 3. Retire la barra de tensi6n de Ia correa (K) de la barra de sujeci6n (L), 7, PRECAUCION: La barra de tens/6n de ta correa funciona a resorte. Suj_te]a con fuerza y su_ltela despaclo, 8. 4, 5. 6, Por el otto lado de la cortadora, desconecte el brazo de suspensi6n y la pieza de uni6n posterior. ,_ PRECAUCION: Una vez que se desconecten las piezas de uni6n posteriores, la palanca elevadora funcionard a resorte. Su_ete con fuerza ta palanca elevadora at cambiada de posici6n. Por el lado derecho de Ia cortadora, desconecte la barra anti-balanceo (S) de [a barra posterior derecha de Ia corladora (D) retire el resorte de contenci6n y la arandela, y ja[e la cortadora hacia usted hasta que la barra se salga det orificio de ]a barra, 9, Haga girar el volante del tractor todo Io posible a ta izquierda, 10. Deslice la cortadora pot debajo det lado derecho deI tractor. PARA INSTALAR LA SEGADORA Retire la correa de la cortadora de la po[ea del embrague el_ctrico (M), Desconecte la pieza de unibn anterior (E)de la cortadora - retire et resorte de contenci6n y la arandela. Por uno de los [ados de la cortadora, desconecte el brazo de suspensi6n de la cortadora (A) del chasis y la pieza de uni6n posterior (C) de ]a barra posterior de la cortadora (D) - retire los resortes de contencl6n y las arandelas, Realice el procedimiento descrito en "PARA INSTALAR LA SEGADOR/_' del capitulo de Armado de este manual. 61 PARA NWELAR LA SEGADORA Aseg6rese de que los neum&ticos est_n inflados a la PSI que se ind[caen estos. Si est&n demasiado inflados o poco inflados, el c_sped no Ie quedar& bien cortado, Io cuaI pedr& llevarlo a pensar qua Ia SEGADORA no eat& bien regulada. REGULAC[ON VISUAL DE LADe A LADe 1. Si todos los neum&tices est_n correctamente inflades yet c6sped parece haber quedado cortado desparejo, determine qu6 lade de la cortadora est,_ cortando m_s al ms. NOTA: Segt3n 1odesee, puede subir el lade m&s bajo o bajar el [ado m&s alto de la segadora. 2. Aborde ellado detacortadoraque quieraregular. 8. Con una Ilave inglesa de 3/4" o de calibre regulable, haga girar hacia la izquierda Ia tuerca de ajuste de la pieza de uni6n {A) para bajar la cortadora, o bien h&gala girar hacia Ia derecha para subirla. NOTA: Cada vuelta comp]eta de ta tuerca de ajuste har&variar la altura de Ia cortadora aproximadamente 3/t6". Iuerca hacia la deracha para subir la segadora IMPORTANTE: El piso debe quedar bien niveIado de lade a lade. Para queet c_sped le quede perfectamente cortado, las cuchillas de la cortadora deben ajustarse de tal manera que la punta anterior quede 1/8" a 1/2" m&s abajo que la punta posterior cuando la cortadora se encuentre en su posici6n m&s alta. _,CUIDADO: Las cuchillas son afiladas. Prot@jase las manes con guantes o envuelva tascuchiIlas con tela gruesa, o bien haga ambas cosas. * Suba la SEGADORA a Ia posici6n m&s alta. - Ubique cualquiera de las hoias de la cuchilla de tal manera que Ja punta quede apuntando directamente hacia adeiante. Mida la distancia (B) que hay entre [a punta anterior y el suelo y entre la punta posterior y el suelo. • Si la punta anterior de la hoja de Ia cuchilla no est& 1/8" a 1/2" m_s abajo qua la punta posterior, dirijase a la parte de adelante del tractor, , Con una llave inglesa de 11/16" o de calibre regulab]e, afloje Ia tuerca A, d&ndole varias vuettas para despejar la tuerca de ajuste B. , Con una Ilave inglesa de 3/4" o de calibre regulable, haga girar la tuerca de ajuste de la pieza de uni6n anterior (B) en sentido horario (ajustar) para elevar la parte de adelante de la cortadora, o bien en sentido antihorario (aflojar) para bajarta. tusrca hacia la izquierda para 4. Pruebe la regulaci6n reaIizada cortando c_sped que aLin no haya cortado y observando c6mo queda. Vuelva a ajustar, en case necesario, hasta obtener resultados safisfactorios. REGULACK_N DE LA PRECISION DE LADe A LADe 1. Con todos los neum&ticos correctamente inflados, estacione el tractor a nivel del suelo o en la entrada a la casa. I_ascuchillas son afiladas. Prot_jase tas manes con guantes o envuelva las cuchiIlas con tela gruesa, o bien haga ambas cosas. 2. Suba la SEGADORA a la posici6n m_s alta. 3, 4. En case que sea necesario realizar un ajuste, lea los pasos 2 y 3 de las instrucciones de Regulaci6n visual que aparecen m&s ardba. 5. Vuelvaa verificar las medidas y ajuste nuevamente, en case necesario, hasta que ambos lades queden iguales. AJUSTE DE DELANTE A ATR%,S A ambos lades de la cortadora, ubique Ia cuchilla hacia un lade y mida Ia distancia(A) que hay entre el horde inferior de la cuchi!Ia y el suelo. Dicha distancia debeser la mnisma a ambos lades. 62 Ajuste la tuerca de regulaci6n de altura B para levantar Ia segadora _ tuerca de regulaci6n de altura B para rgadora Iatuerca A pdmero NOTA: Cada vuelta cornpleta de la tuerca de ajuste hark variar Ia altura de ]a cortadora 1/8". • Vuelva a verificar las medidas y ajuste nuevamanta, en case necesario, hasta que Ia punta anterior de ta hoja de ta cuchilla quede 1/8" a 1/2" m&s abajo qua fa punta posterior. ° Mantenga en la posici6n la tuerca de ajuste per medio de una Ilave inglesa, y apriete bien la tuerca contra dicha tuerca de ajuste, PAPA REEMPLAZAR LA CORREA DE LA CUCHILLA DE LA SEGADORA DESMONTAJE DE LA CORREA DE LA 8EGADORA NOTE: Observe toda la correa de impulsi6n de movimiento y la poeici6n de todas las gufas y guardacorreas. 2. Desconecte elarn6s delcable detembrague (A). 3. Quite fa pieza de uni6n anti-rotacibn (B) que est& det lado derecho deI tractor. 4. Retire la correa del pi56n estacionario {C) y del pifi6n del embrague (D). 5. Retire la correa del pifidn central (E). 6. Jale el cable de la correa hacia la parte de atr&s de] tractor, Con mucho cuidado, retire la correa jalando bacia arriba desde la polea de entrada de la transmisi6n y por encima de las paletas del ventilador (F). 7. Retire la correa jalando hacia abajo desde la polea del motor y atrededor deI embrague el_ctrico (G). 8. Deslice la correa hacia la parte de atr&s det tractor, retirela de la plata de direccidn (H) y s&quela de[ tractor. MONTAJE DE LA CORREA I. Instale Ia correa nueva pas&ndola de ]a parle de atr_.s a la parte de adelante del tractor, por encima de la placa de direcci6n (H) y dot v&stago del pedal del embrague I treno (J). 2. Jale la correa hacia ta parle de adetante del tractor y p&sela alrededor del embrague y por sobre la polea del motor (G). 3. Jale la correa hacia la parte de atr#.s del tractor. Con mucho cuidado, paso la correa de arriba a abajo atrededor del ventilador de transmisi6n y por sobre la polea de entrada (F). Aseg_rese de que la correa est6 dentro dot guardacorrea. 4, Monte la correa en el pifi6n central (E), 5. P&selaa trav6s dot pir_6nestacionario (C) y del pi_6n del embrague (D). 6. Vuelva ainstalar la piezade uni6n anti-rotacibn (B) dot lado derecho de] tractor. AjQstela bien. 7. Vuelva a conectar el arn_s del embrague (A). 8. Aseg_rese de queta correa calce en todas las ranuras de las poleas y dentro de todas las gu[as y guardacorreas. 9. Monte IaSEGADORA (Ver"PARA MONTAR LA SEGADOR/_' en este capitulo del manual). 1, Estacione el tractor en una superficie ni_elad& Ponga el freno de mano. 2, Baje la palanca elevadora a la posici6n de m_.s abajo. 3, Retire la barra de tensi6n de la correa (K) de _lbla barra de sujeci6n (L). CUIDADO: La barra de tensi6n funciona a resorte. Suj_tela con fuerza y su_ltela despac[o. 4. Quite los torniflos (P) de Ias cubiertas derecha e izquierda y retirelas (Q), 5. Quite toda suciedad y testes de hierbas que pueda haberse acumulado alrededor de los dispositivos de recoleccidn y de toda la superficie superior. 6. Retire la correa de lapoleadeI embrague el_ctrico (M), las dos poleas de los dispositivos de recolecci6n (R)y [aspoleas de los pifiones (S). % MONTAJE DE LA CORREA DE LA SEGADORA t. lnstale la correa pas&ndola alrededor de las poleas (R) y alrededor de las poleas (S), come se muestra en la figura. 2. Paso Ia correa por encima de la polea del embrague el_ctrico (M). IMPORTANTE: Verifique que la correa calce bien en todas las ranuras de las poleas de la cortadora. 3. Vue[va a colocar las cubiertas derecha e iz..... _q_u!_[_a_ (Q). Ajuste bien todos los tornillos. 4. Coloque Ja6arC'a-detensi6ri de la _si'fe#,i &_n la barra de sujecidn (L). UlDADO: La barrade tensi6n funciona a resorte. Suj6te]a con fuerza y pbngala despacio. 5, Suba la palanca elevadora a Ia posici6n de m&s arrlba, PAPA CAMBIAR LA CORREA DE IMPULSION DE MOVIM1ENTO Estacione el tractor en una superficie nivelada. Ponga el freno de mano. Si necesita asistenciao del ladode abajo del apoyapi6s izquierdo hay una gu[a pr&ctica para el montaje de la correa DESMONTAJE DE LA CORREA 1. Desmonte la SEGADORA (Ver"PARA DESMONTAR LA SEGADORA en este capitulo del manual). 63 VERIFIQUE EL FRENO Si el tractor exJge m&s de cinco (5) pies para pararse a una velocidad m&s alta en el cambio m&s alto en una superficie nivelada de hormig6n seco o pavimentada, entonces se debe controlar y ajustar el freno. PARA HACER ARRANCAR EL MOTOR CON UNA BATER[A BAJA CONTROL DEL FRENO 1. Aparcar el tractor en una superficie nivelada de hormig6n seco o pavimentada, presionar el pedal del freno hasta eI rondo y aecionar eI freno de estacionamiento. 2. Desembragar la transmisi6n colocando el mando de Ia rueda Iibre en la posici6n "transmisi6n desembragada", Tirar el mando de la rueda fibre fuera y dentro la ranura y soltar asi se coloca en la posici6n desembragada, Las ruedas traseras tiene que bloquearse y patinar cuando se intenta empujar hacia adelante et tractor manualmente. Sustituir las zapatas det freno o contactar con Sears o con un otro centro de servicio cualificado. IMPRESI6N/INCLINAC|ON DE LAS RUEDAS DELANTERAS La impresi6n e inc]inaci6n de las ruedas delanteras de su nuevo tractor vienen asi de f_.brica y son normales. La impresi6n y Ia inclinaci6n de Ias ruedas delanteras no son regulables. En caso que se produzca algfln da5o que afecte la impresi6n o Ia inclinaci6n de las ruedas delanteras taI como vinieron de f_.bdca, p6ngase en contacto con un centro de servicios Sears u otro centro de servicios autorizado. PARA REMOVER LAS RUEDAS PARA HACER REPARACIONES 1. Bloquee el eje en forma segura. 2. Remueva lacubiertadeI eje, el anillo de retenciOny las arandelas para permitir la remoci6n de Ias ruedas (la rueda trasera contiene una gave cuadrada - no la pierda). 3. Repare la tlanta y vu6lvala a montar. AVISO: En las ruedas traseras solamente: alinee Ias ranuras en el cubo de la rueda trasera en el eje. Inserte la Ilave cuadrada. 4. Vuelva a colocarlas arandelas e inserte el aniUo de retenci6nen formaseguraen laranuradeleje. 5. Vuelva a colocar Ia cubierta del eje. -AVISO: Para a-ri_eglarIas Ilantas perfbi_adas-...... y p_ra prevenir que tenga Ilantas pinchadas a causa de pequeSas fugas, comprar de su commerciante Sears y utilizar el sello pare llantas, Elsello previene que las Ilantas se sequen y tambi_n Ia corrosi6n. Arandelas Anillo de Retenci6n Gub{erta "\ LIave Cuadmda (rueda _' trasera solamente) 64 _I=ADVERTENCtA: Las baterias de &cido-plomo generan gases explosivos, Mantenga tas ehispas, las llamas y los materia[es para fumar alejados de las baterias. Siempre use una pro* tecci6n para los ojos alrededor de las baterias. Si su baterfa est& demasiado baja como para hacer arrancar el motor tiene que volverse a cargar, (Vea "Bateria" en la secci6n de Mantenimiento de este manual). Si se usan "cables de empalme" para un arranque de emergencia, siga este procedimiento: IMPORTANTE: Su tractor esta equipado con un sistema de 12 volts. El otro vehicuto tambien tiene que tenet un sistema de 12 volts. No use la bateria de sutractor para hacer arrancar a otros vehiculos, PARA ADJUNTAR LOS CABLES DE EMPALME 1, Conecte cada extrerno del cable ROJO con el terminal (A-B) POSITIVO (+)de cada bateria, preocupdndose de no hacer cortocircuito en el chasis, 2. Conecte un extremo de] cable NEGRO con el terminal (C) NEGATIVO (-) de una bateria completamente cargada. 3. Conecte elotto extremo d.eIcable (D) NEGRO con un buena CONEXION A TIERRA DEL CHASIS, alejado del estanque de combustible y de Ia bateria. PARA REMOVER LOS CABLES, INVIERTA EL ORDEN 1. El cable NEGRO primero del chasis y luego de Ia bater_a completamente cargada. 2. El cable ROJO al 61timo de ambas baterias. Bateda D_bit o Descargada Bater_a GompIetarnente Gargada REEMPLAZAR LA BATERIA _ADVERTENCIA: No hagacortocircuitocon los termina[es de la bater|a aI permitir que una Ilave de tuerca o cualquier otro objeto entre en contacto con ambos terminales a la misma vez. Antes de instalar la bateria remueva las pulseras de metal, los relojes de pulsera de metal, los anilIos, etc. El terminal positivo tiene que conectarse primero para evitar las chispas debido a la conexi6n a tierra por accidente, 1. Levantamos ta capota a la posici6n levantada. 2. Remueve Ia protecci6n de los termina[es. 3, Desconecte el cable de la bateria NEGRO primero y Iuego el cable de la bateria ROJO y remueva la bateria del tractor. 4. Instale la nueva bateria con los t_rminos en misma posici6n como Ia bateria vieja. 5. Reemplazamos cubierta terminal. 6. Primero, conecte el cable de la bateria ROJO con el terminal positivo (+) con el perno hexagonal y la tuerca seg_n se muestra. Apri_telos en forma segura. 7. Conecte el cable de conexibn a tierra NEGRO al terminal negativo (-) con el perno hexagonal y latuerca que queden. Apri_telos en forma segura. 8. Cerramos Ia capota. __ _ Cable Negro Terminal cable_ \ _ _ "d PARA CAMBtAR EL FUSIBLE C&mbielo pot un fusible tipo enchufable de 30 amps, tipo automotriz. El sujetador deI fusible est& ubicado detr&s del tablero. PARA REMOVER EL CONJUNTO DEL CAPO Y DEL ENREJADO 1. Levante el cap6. 2. Desabroche el conector del alambre de tas Iuces delanteras, ,3. P_.rese delante del tractor. Agarre el cap5 en los lados, inclinelo un poco hacia el motor y s&quelo deI tractor. 4. Para volver a instalar el cap6, asegt_rese de volver a conectar el conector deI a[ambre de las lutes. Capota Conector del alambre de las Luces Delanteras TRANSMISION REMOCION/REEMPLAZO DE LA TRANSM1SION Si por acaso su transmisi6n debe set removida para servicio o reemplazo, debe ser purgada despu_s de ta reinstalaci6n y antes de 9pemr el tractor. Vea "PURGAR LATRANSMISION" en la secci6n de la Operaci6n de este manual. MOTOR PARA CAMBIAR LA DELANTERA 1. Levante el cap6. BOMBILLA PARA AJUSTAR EL CABLE DE CONTROL DE LA ACELERACION DE LA LUZ El control de la aceleraci6n ha sido preajustado en la f&brica y no deberia necesitar ajustes, Re-2:--Tire el sujetador de la bombilta- fuera-del ........ vise los ajustes quese describena continuaci6n,agujero en la parte trasera deI enrejado, antes de soltar el cable. Si el ajuste es necesario, yea de manual de motor. 3. Cambie la bombilla en el sujetador y empuje el sujetador de Ia bombilla, en forma segura, PARA AJUSTAR EL CONTROL DE hacia atr&s en el agujero en la parte trasera ESTRANGULACION del enrejado. El control de la estrangulaci6n ha sido preajusta4. Cierre el cap6, do en la f_brica yno deberia necesitar ajustes. ENTRECIERRE Y RELI_S PARA AJUSTAR EL CARBURADOR El alambrado suelto o dahado puede producirel real funcionamiento de su tractor, o que deje de El carburador ha sido preajustado en la f&brica funcionar, o Ie impida et arrancar. y no deberia necesitar ajustes, Sin embargo, se * Revise eIalambrado, Vea eldiagrama deI alambpueden necesltar ajustes de menor importancia radoe[_ctricoenlasecc{6n dePartes de Repuesto. para compeSsar por {as diferencias en el combustible, temperatura, altura o carga. Si el carburador neces_majustes, vea de manual de motor, 65 tnmediatamente prepare su tractor para el almacenamiento aI final de Ia temporada o si el tractor no se va a usar por 30 dlas o m_s. _DVERTENC|A: Nunca almacene e] tractor con gasolina en el estanque dentro de un edificio en donde los gases pueden alcanzar una llama expuesta o una chispa. Permita que el motor se enfrte antes de almacenarlo en cualquier recinto privado. TRACTOR Remueva la segadora del tractor para el almacenamiento por el invierno. Ouando la segadora se va a almacenar pot cierto periodo de tiempo, llmpiela cuidadosamente, quite toda la mugre, ]a grasa, Ias hojas, etc. Gu&rdela en una area limpia y seca. 1. Umpie todo el tractor (vea "LIMPIEZ_' en la secci6n de Mantenimiento en este manual). 2. Inspeccione y cambie las correas, si es necesario (vea las instrucciones para e[ cambio de tas correas en la secci6n de Servicio y Ajustes de este manual). 3. Lubrlque[o, seg_n se muestra en la secci6n de Mantenimiento de este manual. 4. AsegOrese que todas las tuercas, los pernos y los tornillos est_n sujetados en forma segura. Inspeccione las partes movibles para ver_car si hay dafio, rotura o desgaste. C&mbielassi es necesario. 5. Retoque todas superficies pintadas oxidadas o picadas; aplique lija antes de pintar. duce a la separaci6n y a Ia formaci6n de acudos durante elalmacenamiento. La gasolina acidica puede daSar el sistema de combustible de un motor durante el periodo de almacenamiento. • Vaciar el dep6sito del carburante poniendo en marcha el motor y dej&ndolo funcionar hasta que e[ carburante termine el carburador est_ vacio. - Nunca use los productos para limpieza del carburador o deI motor en el estanque de combustible pues se pueden producir daffos permanentes. • Use combustible nuevo la pr6xima temporada. AVlSO: El estabilizador de combustible es una alternativa aceptable para reducir a un minimo la formaci6n de dep6sitos de goma en el combustible durante el periodo de almacenamiento. Agregue estabilizador a lagasolina en el estanque de combustible o en el envase para el almacenamiento. Siempre siga la proporci6n de mezcla que se encuentra en el envase del estabilizador. Haga funcionar e] motor por lo menos 10 minutos despu_s de agregar el estabilizador, para permitir que 6ste Ilegue al carburador. No vaciar la gasolina deI estanque de gasolina y el carburador si se est& usando estabilizador de combustible. ACEITE DEL MOTOR Drene el aceite (con el motor caliente) y c&mbielo con aceite de motor limpio. (Vea "MOTOR" en la secci6n de Mantenimiento" de este manual.) CILINDRO(S) i. Remueva]a(s) bujfa(s). BATERiA 2. Vacie una onza de aceite a tray, s del • Cargue Ia bateria completamente antes de agujero(s) de la bujia en el cilindro(s). guardada. 3. Gire la Havede ignici6n a la posici6n de 'mr• Despu_s de cierto periodo de tiempo en ranque" (Start), por unos cuantos segundos almacenamiento, la bateria puede necesitar para distribuir el aceite. volver a cargarse. 4. Cambie pot bujla(s) nueva(s). • Para ayudar a evitar la corrosi6n y Ias fugas de OTROS potencia durante largos periodos de almace• No guarde la gasolina de una temporada a la namiento, se deben desconectar los cables de otra. Ia bateria y se debe limpiar cuidadosamente • Cambie el envase de Ia gasotina si se empieza (yea "PARA LIMPIAR LA BATERIA Y LOS TERMINALES" en Ia secci6n de Mantena oxidar. La oxidaci6n yio la mugre en su gasoimiento de este manual), lina producir&n problemas. --,_Despu_s de Iimpiarla_ deje Jos cables=_.___Si.es posible, guarde su u0idad er__4nre_cinto cerrado y c_brala para protegerla contra el desconectados y p6ngalos en donde no polvo y la mugre. puedan entrar en contac_o con los terminales • Cubra su unidad con un forro protector adde la bateda. ecuado que no retenga la humedad. No use • Si se remueve la bateria del tractor para el pl_.stico. El pt&stico no puede respirar, Io que atmacenamiento, no ta guarde directamente permite la formaci6n de condensaci6n, Io que sobre concreto o sobre superficies hLlmedas. producir& Ia oxidaci6n de su unidad. MOTOR IMPORTANTE: Nunca cubra el tractor mientras SISTEMA DE COMBUSTIBLE el motor y las areas de escape todavia estan IMPORTANTE: Es important evitar que se forcalientes. man depositos de goma en partes fundamentales de/sistema de combus-tible tales como el carburador, el filtro del combustible, Ia manguera del combustibles mezclados con alcohol (conocido como gasohol o que tienen etanol o metanol) pueden atraer humedad, 1oque con- 66 NO arranca CORRECCI6N CAUSA PROBLEMA 1. 2. 3, Sin combustible. Motor sin la"ESTRANGULACION" (CHOKE) adecuada. Motor ahogado. 1. 2. Bulls mala. Filtro de airs sucio. Filtro de combustible sucio. 8. 4_ 5, 6. 7, Agua en el combustible. 4. 5. 6. 7. 8. Alambrado suetto o dahado, 8. Revise todo el aiambrado. 9. Carburador desaiustadm 9. Vea"PARA AJUSTAR EL CARBURADOR" en la secci6n de Servicio y Ajustes. -1o. V&ivulas del motor desajustadas. ...... Dificil de arrancar Llene'el estanque de combustibte. Vca"PARA HACER ARRANCAR EL MOTOR" en la secci6n de operaeiSn. Espere varies minutes antes detratar de arrancar. 10. Cambie la bulls. Limpieicambie el tiltrc de airs. Cambic el filtro de combustible. Vaciar el estanque de combustible y ell carburador, vuelva a Ilenar el estanque con gasofina nueva cambie el filtro de combustible. Port,ace ea contacto con un centrc de servicio cualificado "SEARS". ,,,,,,,, 1. Filtro de aire sucio. :2. Buj|a mala. 3, Baterla baja o descargada. 1. 2. Umpietcambie el filtro de airs. Cambie la bujia. i VueNa a cargar c cambieIa bateda. 4, Filtro de combustible sucic. 3. 4. 5, Combustible rancio o sucio. 5. 6. Alambrado suelto o daSado. 6. 7. Carburador desajustado. 7. Vea "PARAAJUSTAR EL CARBU RADOR" en Ia sccci6n de Servicio y Ajustes. 8. V_vulas deI motor desajustadas. 8. Pcngase en contacto con un centre de servicio cualfficado "SEARS". 1. 2. PedaldeI freno no presionado. 1. Presione el pedal delfreno. Elembraguadelaccesorioest&enganchado. 3, Bateda baja o descargada. 2. & Desenganche el embrague del acceserio. Vuelva a cargar e cambie la baterla. 4. Fusible quemado. Terminales de la bateria corroidos. .€. Oambie el fusible. 5. 6. Aiambrado suelto o daSado. 5. 6. Limpie los tsrminales de la bateria. Revise todo el alambrado. 7, Interrupter de Ia ignici6n fallado. 7. Reviseicambic elinterruptor de la igniciSn. 8, Solenoids o arrancadcr fallados. 8. Revise/cambie el solenoide 0 arrancador. 9, Interruptor(es) que exige(n) Ia presencia deI operador falIade. 9. Pongase en contactc con un centre de servicio cualificado "SEARS". El motor suena pete no arranca 1. 2. Bateria baja c descargada 1. Vuelva a cargar 0 cambie ]a bateria. Terminales de la bateria cc_roidos. 2. Limpie los terminales de Ia baterla. ............................... 3 .... Alambradc sue]to_o.daSado ............................ :.............. 3_..Revisetodcelalambr.ado ........................ 4. Solenoids o arrancador re!lades. El motor no la vuelta P!_rdlda de fuerza Cambie el flltro de combustible. Vaciar eIestanque de combustible y vuelva a Ilenarlo con gasoline nueva. Revise todo el alambrado. 4. Revisetca,mbie el solenoide o arra.ncador. Corta mucho c_sped, muy r&pidc. Acelerac[bn en ta posicibn de "ESTRANGULAGION" (CHOKE). 3, Acumulaci6n de c_sped, hojas y basura debajo de Ia segadora. 4., Filtro de sire sucio. 5, NiveI de aceite bajoiaceite sucio. 6. Bujia fallada. t. 2. Eleve la atturade corte/reduzca lavelocid&d Ajuste eI control de la aceleraci6n. S. Umpie la parle inferior de la cajade la segadora. 4. 5. Umpie/cambie el filtre deairs. Revise el nivel de aceite/cambie e[aceite. 6. 7. 8. 7. Limpie y vuelva a ajustar Ia abertura o cambie Ia bujia. Cambie el filtro de combustib[e. , ,,,,,,,....... t, 2. Fi[tro de combustible sucio. Combustible rancio o sucio. 8. 67 Vaciar elestanque de combustibleyvuelva a Ilenar[o con gasolina nusva. P6rdldade fuetza (sigue) CORRECCI6N CAUSA PROBLEMA 9. ,,,, ,,,,,,,,...... Agua en el combustible, 9. to, 11, t2, 13. Alambrado de la bujia suelto, Re|ilia/elates de airs del motor sucias. Silenciador sucio/taponado. Alambrado suelto o daSado. t4, Carburador desa|ustado. 40. 1. I2. _3. _4. t5, V&lvulas 45. del motor dBsajustadas, Vaciar elestanquede cornb ustib[eyelcarburador,vuelvaallenarelestanque con gasoline nuevay cambie eifiltro de combustiblE. Conecte y apdete el alambre de la buj{a, Utopia las rejillaialetas de aide dEI motor. Limpie/cambie e] silanciador. Revise redo el alambrado, Vea"PA RA AJU STAR EL CARBURADOR" en Ia secci6n de Sewicio y Ajustes, Pongase en conlacto con un centre dE servicio cuaf_cado "SEARS", , ,,,,,,,,,, ,,,,,,,,, ,,,, ,,,,,,,,,,,,,,,,,,,,,,,,, .... Vibtacl6n excestva £| motor cord, n_afunclo_ando cuando e! operador se baja del asiento con el embrague de! accesodo engEnchado El torte 1_ Cuohilla desgaslada, doblada o suelta. 1, 2, 3, Mandril de la cuchilla doblado, Parts(s) suelta(s)ida_ada(s). 2. 3, 1, Sistema da control que exige la presencia del operador -seguridad fallado. 1. CuchilIa desgastada, doblada 0 suelta, 1. 2. El con|unto segador no estdnivelado, Acumulaci6n de c6sped, he|as y basura debajo de la segadora. Mandr[t de la cuchilla doblado, Los agujeros de ventilac}6n del conjunto se_ador taponadosdebido a fa acumulacl6n dace-sped, he|as y basura alrededorde los roandriles. 2. 3. Obstrucci6nenelmecanismodelembrague, Lacor,teadeimpulsi6ndelasegadEraest_, desgastadaidaSada, Polea de guia atascada, Mandrii de la cuchilla atascado, 1. 2. Revise el a[ambrado, los interruptores y la conexiooes,Si no est&n correctas, Pongase en contacto con un centro de servicio cuat_cado "SEARS °. disparejo 3. Las cuchil* las segadoras no reran 1. 2. 3, 4, Male des-' carga del c_sped "" 1.' " _Jeio'cidad deI motor rouy lenta. 4. 5, 3. 4. 1. 2. 3. Velocidad de recorrido demasiado rdpida. C_sped roe|ado, 2. 3. 4. 5. El con|unto segador no est,_nivelado. Presi6n de airs de Ias I[antas baja o dispareja. 4. 5 7, Acumalaci6n de c6sped, hojas y basura debajo dE la segadora, Lacorreadeimpulsi6ndelasegadoraest& desgastada 0 desajustada, Las cuchillas est&n mat coninstaladas. 7, 8. g. s. 9. _0. Cuchillas inadecuadas en use. 10. _1, Los agu eros de venti]aci6n del conjunto agujeros segador taponados debido ala acumulaci6n de c6sped, hojas y basura alrededor de los mandriles, 11. 68 Cambie la cuchilla. Apriete el perno de la cuchilIa. Cambie {a mandril dE la cuchilla, Apdete la(s) parte(s). Carobie las partes decades. Cambie [a cuchilla. Apdete el perno de la cuchi{{a, N_vele e[ con|unto segador. Liropie la parts inferior de Ia cajade la segadora, Carobie {a mandril de la cuchil{a, Limpie alrededor de los roandriles pare abrir los de ventilaci6n. Reroueva [a obstrucci6n. Cambie la correa de impulsi6n segadora. Cambie {a poise de gu_a. Gamble la mandril de la cuchiita. de la Ponga el contoI de la a'celetaci6n en [a posici6n de "RAPIDO" {fast). Carobie a una velocidad m&s lenta, Permita qua se seque el c6spedantes de sager. Nivele el con|unto segado_, Revise lasllantas para vedficarquetienen ]a presi6n de airs. de Ia cuchi[[a. Limpie la parts inferior de ia caiade la segadora, Cambie/ajuste la cerrea de impulsi6n de la segadora, Vuelva a instalar las cuchitlas elborde afilado hacia able. Gamble per las cuch[llas enumeradas sn este manual. Liropie akededor de los mandriles pare abdr Ios de ventilaci6n. CORRECCION CAUSA PROBLEMA ",- El interruptor est_'_PAGADO"(OFF). 1. "ENCIENDA _ (ON) et interruptor, 2. Bombilla(s) 0 t&mpara(s) quemada(s). 2 Cambie Ia bombilla(s) o I&mpara(s). 3, Interrupter de la luz falIado, 3. Revise/cambie el interruptor de la luz. 4. Alambrado sue[to 0 dafiado. 4. Revise el alarnbraday las ccne:_ones. 5. Fusible quemado. 5. Gamble el fusible. La bater|a no carga 1. 2. 3. 4, Elemento(s ) de la beteria malo(s). Males conexiones de cables. Regulador fallado (si equipado). AIternador fallado. ,,,,,,,, ,,,,,,,,,,,,,,, 1. 2. 3. 4. Cambie la baterta. Revisellimpie todas Ias cables. Gamble el regu[ador. Cambie el alternador. P_rdida de tmpulsI6n r. El control de rueda libra est& en[a posici6n "DESENGANCHADO" (disengaged). Residuos as en de la placa de direcci6n (Si los tiane), La correa de impulsi6n de impulsi6n de movimiento, Aireatrapadoenlatransporleoelservicio. Llave cuadrada de eje es ausente. "L Panga el control de rueda libra enla posici6n "ENGANOHADO"(disengaged). Vea"LIMPIEZ/_' en lasecci6n de Mantenimanta de este manual. Reemplace la correa de movimian-ta esta gastada, dafieda o rata. Purgue la transmisi6n. Vea "PARA REMOVER LAS RUEDAS" en la seccibn de Servicio y Ajustes de este manual Las luz (ces) de lantera(s) no funcionaado 2. 3. 4. 5. 2. 3. 4. 5. El motor tien "contraexplosiones" cuando se "APAGA" Etco ntrolde laacele rac i6ndeI motor no rue ajustado en la posici6n de velocidad media y m_=xima(r_.pida) antes de pare el motor. Mueva el control de ta aceleraci6n a {a posicibn de velocidad mBdia y m_ima (r&pida) antes de pare eI motor. Eltractor se parian ma_ cha arras Elsistemade funcionamiento atr&s (ROS) no est& "ON". cuando enganche la sagadora o otro accesorio. Girar el ROSen la posici6n "ON".vea Ia $ecci6n de operaci6n. 69 70 GUfA SUGERIDAPARA MEDIRLAS PENDIENTESCON LA VISTA PARAIUNA OPERAClONSEGURA I y abaJo de tas pendientes, nunca transversarmente con respecto a Ias ] ADVERTENCIA: Para evitar dai_os mayores graves, haga su tractor pendientes. No cortar pendientes de 15funcionar grados. Haga los ardba ! vlraJes gradua_mente para evltar volca_se o la p_rdlda de control, Tenga mucho culdado cuando camble de direcci6n en |as pendlentes, 1. P]egar esta p_g|na a lo largo de la linea punteada arriba |ndicada, 2. Tener la p_igtna antedesrmlsmosdemodo quesuborde izquierdo sea vertlca! paralelo al tronco del drbol u otra estructura vertical. 3. Mirar a trav6s del pllegue en dJrecclSn de la pendtente que se qulere medir, 4.. Comparar el dnguto del pliegue con la pend]ente del terreno. NEED MORE HELP? YouI[ find the answer and mo_e on managemyhome.com - for free! . Find this and a[[ your other product mamJa[s online. • Getanswersfrom ourteamof homeexperts, I • Geta per;onaUzed maintenanceplanfor yourhome. , Findinformationandtootsto hetpw_thhomeprojects. manage home bTot_ht to you by Se_ Your Home For repair- in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters. 1-800-4-MY-HOM_ (%80D469-4663) Any[ime, dayor night (U.S,A, and Canada) WWW,SaaPS.COfP. WWW.aeats,ca @ Our Home For repair of carry-in products like vacuums, lawn equipment, and electronics, call or go on-line for the nearest Sears Parts and Repair Center. %800488-1222 Anytime, day or night (U.S,A, only) W",_N.S eal_.Com To purchasea protectionagreement(U.S.A.) .......... or maintenance agreement(Canada) on a-productserviced by Sears:......... 1-800-827-6655 (U,SA) Para pedirservido de reparad6n a domicilio, y para ordenarpiezas: !-aBa-SU.HOGAR® (1-888-7_-S427) ® Registered Trademark I ® Marca Registtada/-m TM t-800-361-6665 _Canada) Au Canada pour seMce en francis: I"800"LE'FOYERM° (t-_0.533-S937) Trademark l _ Service Mark of Sears Brands, LLC Merca de F&bdco t s_ Marca de Se_i_io de Sears Sra_tds, LLC _c Marque de COmmerceI uO Matqge d_pos6e de Sears Brands,LLC 11.01.12 BD Printed in the U,S.A,
This document in other languages
- español: Craftsman 917.28863