Download Zhone 4821-A2 Installation guide

2. Cabling
6. Secure the cables as required for strain relief.
10/100BaseT Uplink (Port 2)
Port 2 is the uplink for the DSLAM. A straight-through cable can be used
regardless of the destination interface, since the port automatically distinguishes
between an MDI and an MDIX.
Procedure
To use Port 2 as the uplink:
1. Connect an 8-position modular cable to Port 2.
2. Connect the other end of the cable to the uplink interface, such as an Ethernet
switch.
4821-A2-GN21-10
July 2004
2-3