Download Cabletron Systems SFCS-1000 Specifications

AMI Configuration Commands
B.14.2.3
Deleting the Address of the System Log Host
This command allows the user to delete the address of the host to which the
switch’s system messages are being logged. Enter the following parameters:
NOTE:
This command is only available on the local
switch.
localhost::configuration system syslog> delete
Remove 192.88.243.118 as remote syslog host [n]? y
Remote syslog host removed. Syslog messages will not be sent.
Syslog Facility: local7
The switch prompts the user to confirm that the address should be deleted.
Entering y causes the switch to delete the address, as shown above. If you do
not want the address to be deleted, enter n or press <RETURN> and you will
be sent back to the syslog prompt.
Once the host’s address has been deleted, the switch’s system messages are
no longer logged until a new host address is set. However, if a facility has
been assigned to the switch, that facility assignment remains intact. So if you
assign another host without changing the facility, the new host will list this
switch’s syslog messages under the same facility. For example,
localhost::configuration system syslog> show
Remote Syslog Host: 169.144.48.41
Syslog Facility: local7
localhost::configuration system syslog> delete
Remove 169.144.48.41 as remote syslog host [n]? y
Remote syslog host removed. Syslog messages will not be sent.
localhost::configuration system syslog> show
No remote syslog host set. Syslog messages will not be sent.
Syslog Facility: local7
localhost::configuration system syslog> set 204.95.89.84
Remote Syslog Host: 204.95.89.84
localhost::configuration system syslog> show
Remote Syslog Host: 204.95.89.84
Syslog Facility: local7
B-115