Download AVL Genesis User`s guide

Using this approach, when the program
reaches cue #2000 the projectors in Bank
B will be commanded and the projectors
in Bank A will be finished.
NOTE: Since the above Program
Commands control projectors by
both screen number and independents, all screen numbers and
independents
must
be exchanged
(Rule c).
NOTE: It is also acceptable to
exchange screen numbers and independents from Bank B to Bank A.
For example ESN lB, 1 A exchanges
screen 1 from Bank B to A.
After doing those examples, the use of
ESN
should
become
clear. It
is
important to understand all of the rules
that have been presented in order to use
this command correctly.