1
Download Beta EVO 2T Specifications
Transcript
Assembling and testing the engine 3 3 .9 Internal cover of the clutch Couple a new seal with the left casing after inserting centering pins and the internal cover of the clutch. 5 The layout of the bolts is shown in the picture and these must be tightened to a torque of 10Nm by following a cross-wise pattern as shown in the picture below. 3 1 2 4 7 6 Layout of the screws on the internal cover of the clutch. M6X30 M6X20 M6X30 M6X35 M6X35 M6X20 M6X20 Tightening order of the casing cover bolts. 40
