Download Atmel AT85DVK-07 Specifications

Transcript
AT85C51SND3Bx
The firmware has to change the Token for each phase.
The initial data toggle is set for the corresponding token (ONLY for Control Pipe):
OUT Pipe Management
•
SETUP: Data0
•
OUT: Data1
•
IN: Data1 (expected data toggle)
The Pipe must be configured and not frozen first.
Note: if the firmware decides to switch to suspend mode (clear SOFE) even if a bank is
ready to be sent, the USB controller will automatically exit from Suspend mode and the
bank will be sent.
131
7632A–MP3–03/06