Download Sartorius Basic lite Operating instructions

Product
Order No.
Retainer for bar code scanner, for attachment to floormounted column, bench stand or complete scale retainer
YBH01CWS
Plates for attaching printer to floor-mounted
column or bench stand
YPP01CWS
Castor set (2 guide castors, 2 lockable castors) for
YBP03CIP/S bench stand
YRO03CI
Anti-theft device
YTP01CI
24V industrial power supply module*
YAS02CI
Connecting cable (25-pin D-SUB) for YRB10Z
battery pack (2m)
YCC02-RB01
Connecting cable with cable gland for YRB10Z
battery pack (2m)
(for Combics models CIS only)
YCC02-RB02
Connecting cable (25-pin D-SUB) for car battery (2 m)
YCC02-CB01
Connecting cable with cable gland for car battery für (2m)
(for Combics models CIS only)
YCC02-CB02
Connecting cable with cable gland for YBR02FC
bar code scanner (for Combics models CIS only)
YCC02-BR02
Connecting cable with cable gland 9-pin D-SUB
male connector, 6m (for Combics models CIS only)
YCC02-D09M6
Connecting cable with cable gland, 9-pin D-SUB
female connector, 6m (for Combics models CIS only)
YCC02-D09F6
Connecting cable with cable gland, 25-pin D-SUB
female connector, 6m (for Combics models CIS only)
YCC02-D25F6
Connecting cable with cable gland, 12-pin round
male connector, 6m (for Combics models CIS only)
YCC02-R12M6
Connecting cable with cable gland, 12-pin round
female connector, 6m (for Combics models CIS only)
YCC02-R12F6
Cable for YDA01C-20MA power interface,
with open cable ends e.g., 5 + = 5m*
6906926
Cable gland for Combics model CIS, IP65/67 protected
(for Combics models CIS only)
YAS04CIS
Connecting an IS Weighing Platform to a Combics 2 Indicator
You can connect an IS weighing platform as WP2.
Characteristics:
– IS weighing platforms process weighing data independently
of the indicator
– IS platforms can be internally adjusted
– …-0CE models have a separate approval number, on a tag
affixed to the cable
– Please observe the conditions described in the instruction
manual for the platform connected
* not for use in legal metrology
127