Download Sartorius Basic lite Operating instructions

Operating the Combics 2
Display
The calculated average weight, together
with the selected weight unit, is static
in the main display. The ! symbol is
also displayed, and 0 is shown in the
numeric display.
Press w to toggle the display between
the average weight and the current
weight on the platform.
After unloading the platform (i.e., when
the load is less than half the preset
minimum load), the current weight is
shown and the numeric display shows
the selected number of subweighing
values.
If the menu setting “Display remains
static until c is pressed” (3.21.2)
is active, the average weight is still
displayed after the platform is
unloaded, until c is pressed.
If both menu settings “Display remains
static until c is pressed” (3.21.2) and
“Automatic (On)” (3.8.1) (for application
start) are active, the average weight
remains displayed after the platform is
unloaded; when another weight is
placed on the platform and the start
criteria are met, the averaging routine
starts automatically.
Preparation
§ Press the e key to switch on the
Combics
§ While all segments are lit, press the
) key
§ Open the numeric menu: Press the
) key twice
3 Application parameters
3.5 Minimum load for automatic taring
and automatic printing
3.5.1 1 digit
3.5.2 2 digits
3.5.3 5 digits
3.5.4 10 digits
3.5.5 20 digits
3.5.6 50 digits
3.5.7 100 digits
3.5.8 200 digits
3.5.9 500 digits
3.5.10 1000 digits
3.6 Minimum load for automatic start
3.6.1 1 digit
3.6.2 2 digits
3.6.3 5 digits
3.6.4 10 digits
3.6.5 20 digits
3.6.6 50 digits
3.6.7 100 digits
3.6.8 200 digits
3.6.9 500 digits
3.6.10 1000 digits
3.7 Automatic taring (first weight tared)
3.7.1 Off
3.7.2 On
3.8 Application started automatically with
most recent initialization data when
Combics switched on
3.8.1 On (automatic start)
3.8.2 Off (manual start)
3.18 Start of averaging
3.18.1 Manual
3.18.2 Automatic
3.19 Deviation of successive
subweighing operations
3.19.1 0.1 % of the animal/object
3.19.2 0.2 % of the animal/object
3.19.3 0.5 % of the animal/object
3.19.4 1 % of the animal/object
3.19.5 2 % of the animal/object
3.19.6 5 % of the animal/object
3.19.7 10 % of the animal/object
3.19.8 20 % of the animal/object
3.19.9 50 % of the animal/object
3.19.10 100 % of the animal/object
3.20 Automatic printout of results:
3.20.1 Off
3.20.2 On
3.21 Display of results static when
platform unloaded:
3.21.1 Display remains static until
unload threshold reached
3.21.2 Display remains static until
c is pressed
§ Save settings and exit Setup: Press and
hold the ) key
71