Download Sharp EL-6230 User manual

Default Setting (System Menu)
TCP/IP (IPv6) Setup
Set up TCP/IP (IPv6) to connect to the network. The default setting is Off.
Use the procedure below to setup the TCP/IP (IPv6) setting.
Sys. Menu/Count.:a b
1 Report
2 Counter
3
System
*********************
[ Exit
]
1
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
Login User Name: L b
*******************
Login Password:
[ Login
In the Sys. Menu/Count. menu, press the U or V key to
select [System], and press the OK key.
]
System:
a b
1
Network Setting
*********************
2 I/F Block Set.
3 Security Level
[ Exit
]
Network Setting: a b
1
TCP/IP Settings
*********************
2 NetWare
3 AppleTalk
[ Exit
]
TCP/IP Settings: a b
1
TCP/IP
*********************
2 IPv4 Setting
3 IPv6 Setting
[ Exit
]
2
The System menu appears.
3
Press the U or V key to select [Network Setting].
4
Press the OK key. The Network Setting menu appears.
5
Press the U or V key to select [TCP/IP Settings].
6
Press the OK key. The TCP/IP Settings menu appears.
7
Press the U or V key to select [IPv6 Setting].
8-126