Download Marantz CDR500 User guide

Transcript
The numbers between parentheses refer to the fold-out.
This CD-Recorder can be used to record directly or through a
(pre-) amplifier from any digital or analog audio source.
In addition, the appliance can be used as a regular CD player.
Read how to connect the CD-Recorder based on the
possibilities your other audio equipment offers.
Please refer to the operating instructions for your other audio
equipment first.
Unbalanced analog connections
1
For recording and playing, connect the CD-Recorder to
other equipment based on the diagram below:
CD RECORDER/CD PLAYER CDR500
CDR
PLAY MODE
CD
IR
Recordable
ReWritable
STORE
POWER
STANDBY
ERASE
REC.M
FINAL
INPUT
REC LEVEL/SELECT
MENU
TIME
TEXT
PROG
LEVEL
HEADPHONE
DELETE
CANCL
PUSH ENTER
0
The following options are available:
CD
ANALOG
OUT
10
CDR
ANALOG
IN
OUT
L
L
-
Balanced analog connections
-
Unbalanced analog connections
-
Digital SPDIF connections
-
Digital Optical connections
L
L
L
L
L
-
Digital cascade connections
R
R
R
R
R
3
R
4
R
5
INPUT
INPUT
OUTPUT
INPUT
ANALOG
DEVICE
ANALOG
DEVICE
OUTPUT
ANALOG
SOURCE
Balanced analog connections
2
1
Select INPUT SELECT switch (34) to ANALOG L/R (RCA).
For recording, connect the analog balanced cable from
the CD-Recorder to a source based on the diagram below:
3
ANALOG
OUT
COLD(-) IN
R
L
PLAY MODE
L
BALANCED
IN
R -TRIM- L
CD RECORDER/CD PLAYER CDR500
CDR
L
CD
IR
R
Recordable
0
+22
0
R
+22
ReWritable
(REF=+16dBu/0dBFS)
STORE
STANDBY
POWER
ERASE
REC.M
FINAL
INPUT
REC LEVEL/SELECT
MENU
TIME
TEXT
PROG
HEADPHONE
INPUT
SELECT
LEVEL
DELETE
CANCL
PUSH ENTER
0
10
CDR
3
R
L
BALANCED
2
1
-
R
L
Note:
Never use the PHONO input.
ANALOG SOURCE
2
For DUAL-Mode playback (See page 17), connect cable 5
between the ANALOG CD OUTPUT-sockets on the CDRecorder and the ANALOG INPUT sockets of an amplifier
e.g. TAPE IN, CD or AUX.
DUAL-Mode playback is the function that the deck 1
and the deck 2 on this CD-Recorder can play the songs
separately at the same time.
Set INPUT SELECT switch (34) to BALANCED IN.
3
ANALOG
OUT
COLD(-) IN
R
L
R
L
L
BALANCED
IN
R -TRIM- L
0
+22
0
R
+22
INPUT
SELECT
(REF=+16dBu/0dBFS)
When this CD-Recorder is shipped, it is already set to
+16dBu/0dBFS at the MAX-REC-LEVEL. If you want to
change the level, rotate TRIM control (33) to adjust input
level for both L and R.
ANALOG
OUT
COLD(-) IN
R
L
R
L
L
BALANCED
IN
R -TRIM- L
0
+22
0
R
+22
(REF=+16dBu/0dBFS)
INPUT
SELECT
Note:
Use the digital output for exact calibration in combination with a
digital signal analyzer.
5
CDR500N P01-14 (E)
5
9/7/00, 5:12 PM
ENGLISH
INSTALLATION