Download Cino HB2110 Specifications

Configure Your FuzzyScan
Program & End
System List, Group & Master Default
Scan
“PROGRAM”
Scan
“SYSLIST”
FuzzyScan will enter programming mode,
and inhibit all non-programming functions.
FuzzyScan will list the product information and
revision number to host via selected host interface,
then issue the completion beeping.
Scan
“M_DEFAULT”
Reference Manual
Wireless FuzzyScan
Scan
“END”
FuzzyScan will exit programming mode, and store all
FuzzyScan will recover all programmable
parameters in Flash Memory ASIC or non-volatile memory,
then issue the completion beeping.
parameters into factory preset configurations,
then issue the completion beeping.
Please note that the FuzzyScan will take 3-4 seconds to
store parameters in internal Flash Memory ASIC or
non-volatile memory after you scan the “END”. Please
don’t turn off the power before the completion beeping. It
may destroy all configured parameters.
15