Download Cross Technologies 450R Specifications

Transcript
PROBLEM/SYMPTOM
LCD display shows:
NV Memory Error
Receiver LCD display
indicates a CXR alarm.
POSSIBLE CAUSE
A checksum error was found
after reading the nonvolatile memory device.
The unit may still be used
(press the Program/Execute
switch to proceed) but
should be returned for
repair as soon as convenient
since a power interruption
may cause loss of the unit's
programmed settings.
Receiver may be set to an
incorrect frequency, or the
transmit site may not be
operating on the specified
frequency.
Receiver SQUELCH adjustment
may need to be changed.
(See Section 4-7)
The subcarrier transmitter
for the specified frequency
may not be operating, or may
be at a reduced carrier
level.
Receiver LCD display
indicates an AFC alarm.
Any of the situations described above for a CXR
alarm may, under some conditions, also cause an AFC
alarm.
The receiver may be tuned to
a wide deviation channel
which it is unable to track.
450 Operation Manual Rev A
Page 21
8/26/99