Download Crown Com-Tech CT-200 User guide

ASTi Crown® Power Amplifier User Guide (Ver. 1, Rev. F)
2.4. Powering Up the Amplifier
Important: Complete section 2.1. Setup Procedure before proceeding with this section.
When turning on the amplifier for the first time follow the steps below.
1. Turn down the levels of the audio source.
2. Turn on the Power switch. The power indicator should illuminate.
3. Turn up the audio source levels.
4. Once the amplifier is properly setup and connected to the network, use ACE Studio software to complete the amplifier configuration.
Remember: Disconnect the power cord before making any changes to the installation or wiring.
Copyright © 2012 Advanced Simulation Technology inc.
9