Download Conair 5000 User guide
Transcript
Replacing the Desiccant Wheel M o t o r (W1600 - 5000) (continued) 9 Slip the belt onto the sprocket, and adjust the tension spring nut to its original position. 10 Connect the wires to the new motor. 11 With the access panel still removed, connect the power to the dryer and start it. Ensure the wheel turns in the correct direction. If the belt appears to be slipping, it may be necessary to increase the tension on the drive belt slightly. Do not increase this tension any more than necessary to allow the wheel to rotate without slipping. 12 Bolt the access panel in place and close the side panel(s) on the dryer. 6 - 3 6 l Tr o u b l e s h o o t i n g