Download Installation Instructions

햲
YOU MUST USE STABILITY
ANTI TIP BRACKET TO
PREVENT UNIT FROM
TIPPING.
ANTI-TIP STABILITY DEVICE INSTALLATION INSTRUCTIONS
1. The anti-tip bracket has to be attached as shown on figure below, it has to be fixed
on the rear wall by no. 2 (two) suitable screws (supplied with the anti-tip kit).
2. After fixing the anti-tip bracket, slide range into place. Be sure the anti-tip bracket is
fully inserted in the slot of the range back.
15/16
Dotted line showing the position
of the range when installed
from top of cooktop
with range installed
in final position
ANTI-TIP STABILITY
DEVICE FIXING
26" 11/16 (678 mm)
17"
(455.5 mm)
17" 15/16
(455.5 mm)
Anti-tip
stability device
Slot for inserting
the anti-tip bracket
Fig. 1.10
12