Download Blade Network Technologies BLADEOS G8124 Technical data
Transcript
APPENDIX A BLADE OS Syslog Messages The following syntax is used when outputting syslog messages: <Time stamp><Log Label>BLADEOS<Thread ID>:<Message> The following parameters are used: <Timestamp> The time of the message event is displayed in month day hour:minute:second format. For example: Aug 19 14:20:30 <Log Label> The following types of log messages are recorded: LOG_EMERG, LOG_ALERT, LOG_CRIT, LOG_ERR, LOG_WARNING, LOG_NOTICE, LOG_INFO, and LOG_DEBUG <Thread ID> This is the software thread that reports the log message, such as: stg, ip, console, telnet, vrrp, system, web server, ssh <Message>: The log message Following is a list of potential syslog messages. To keep this list as short as possible, only the <Thread ID> and <Message> are shown. The messages are sorted by <Log Label>. Where the <Thread ID> is listed as mgmt, one of the following may be shown: console, telnet, web server, or ssh. BMD00142, November 2009 331
Related documents
Blade Network Technologies BLADEOS G8124 Technical data
Blade Network Technologies RACKSWITCH G8124 Technical data
Blade Network Technologies G8000 Technical data
HP BMD00022 User's Manual
Nortel Networks 43W7774 Switch User Manual
Blade Network Technologies G8000 Specifications
Nortel Networks 40M2420 User's Manual
HP GBE2 User's Manual
Nortel Networks BMD00007 User's Manual
Chapter 3: Switching
Millennia™ IR - Spectra
NEC N8406-026 Command Reference Guide