Download Rheem Single Element Specifications
Transcript
Water Too Hot Water too hot diagnostic Does the temperature at the hot tap correspond with or near the thermostat setting? Is a tempering valve installed? YES NO Explain to customer the reasons for storing water hotter than they may desire i.e. 1. When mixed with cold water more hot water delivery is possible. 2. Prohibit bacteria growth. Tempering devices should be suggested as a solution. NO Tempering valve faulty. Clean filters or replace. YES Is the thermostat in good contact with the cylinder? NO Remove the thermostat and clean any scale from the cylinder wall. Re-tension bracket and refit thermostat. NO Reset the ECO YES Are the thermostat ECO contacts closed? ECO TEST 1 ECO TEST 2 Are the thermostat contacts closed? THERMOSTAT TEST 1 THERMOSTAT TEST 2 YES YES Replace thermostat NO Is the element installed in the correct orientation? NO Refit element correctly YES TM013 Vulcan Electric Service Instructions REV: D D.O.I.: 05/09 This document is stored and maintained electronically by Replace thermostat 21 Service. All printed copies not bearing this statement in RED are deemed “uncontrolled”