Download A&D OP-05 Instruction manual

data
$CL
$WT
$GR
$NT
$TR
$HD
$UT
$ST
$CP
$ID
$DN
$CD
$AN
$TL
$CM
$CR
$LF
$DE
$DL
strings
Weight, result of comparison etc.
CLear previous settings. The UFC command parameters can not be
changed partially.
Displayed data
GRoss data
NeT data
TaRe data
Header of Gross/Net/Tare. Refer to CF06.
Weight UniT
STable/Unstable
Result of ComParison
ID number specified at F06
Data Number increments with each output automatically
CoDe memory number
Accumulation count
TotaL weight
CoMma
CR code (0Dh)
LF code (0Ah)
DElete the last parameter
Inserting DeLay time (0.1 second step) Example: DL10 : 1.0 second delay
Output the specified strings, enclosed by single quotation (’).
’ itself is described using three single quotations; ’’’
Example: ’A & D’
Set data bits = 8 bits if using the 8-bit characters.
hexadecimal Control code of the printer etc, preceded by #.
2 characters preceded by # is hexadecimal code (0 - 9, A - F).
Example: #09
The #FF code can not be used because it is used for internal
control.
Example
SF1,$ID$DN$CR$LF$GR$UT$CR$LF
Serial output data format 1, ID number, data number, carriage return and line
feed, Gross weight, unit, carriage return and line feed.
SF2,’ Welcome to A & D’$LF’Total weight ’$AN$TL$LF$LF
Serial output data format 2, the strings ’ Welcome to A & D’ and line feed,
the strings ’Total weight ’ accumulation count, total weight, and 2 sets of line
feed.
AD-4406 Weighing Indicator
Page 51
13.4. UFC Command