Download Advantech PCM-3353 User manual

„
„
„
„
„
„
„
„
„
„
„
„
„
„
„
„
IDE Primary Slave UDMA [Auto]
This item allows adjustment of primary slave IDE mode or type for modification
purposes. Suggested BIOS default value is "Auto".
IDE DMA transfer access [Enabled]
This item allows adjustment of IDE DMA mode. Enabling increases IDE Data
transfer speed. Suggested BIOS default value is "Enabled".
LAN1 controller [Enabled]
This item enables/disables the onboard LAN switch.
ITE8888 Configure [Press Enter]
This item allows user to make detailed ITE8888 adjustments.
IDE HDD Block Mode [Enabled]
This item allows enabling or disabling IDE block data transfer mode. When
enabled, it will speed up HDD data transfer of efficiency. Suggested BIOS
default value is "Enabled".
LPT/FDC switch: [Disabled]
This item enables/disables the LPT/FDC port switch. When enabled, it will
change from LPT to FDC port. Suggested BIOS default value is "Disabled".
Onboard Serial Port 1 [3F8]
This item allows user to change COM 1 address. Suggested BIOS default value
is "3F8".
Onboard Serial Port 1 use [IRQ4]
This item allows user to change COM 1 IRQ. Suggested BIOS default value is
"IRQ4".
Onboard Serial Port 2 [2F8]
This item allows user to change COM 2 address. Suggested BIOS default value
is "2F8".
Onboard Serial Port 2 use [IRQ3]
This item allows user to change COM 2 IRQ. Suggested BIOS default value is
"IRQ3".
Onboard Serial Port 3 [3E8]
This item allows user to change COM 3 address. Suggested BIOS default value
is "3E8".
Onboard Serial Port 3 use [IRQ10]
This item allows user to change COM 3 IRQ. Suggested BIOS default value is
"IRQ10".
Onboard Serial Port 4 [2E8]
This item allows user to change COM 4 address. Suggested BIOS default value
is "3E8".
Onboard Serial Port 4 use [IRQ5]
This item allows user to change COM 4 IRQ. Suggested BIOS default value is
"IRQ5".
Auto Flow Control [Disabled]
This item allows user to control COM port auto flow transfer. Suggested BIOS
default value is "Disabled".
Onboard Parallel Port [378/IRQ7]
This item allows user to change parallel port address. Suggested BIOS default
value is "378/IRQ7".
PCM-3353 User Manual
20