Download TKA 9110 UC Coffeemaker Training Program

Transcript
26
Disassembly -- Top & Rear Panels (1)
NOTE:
Washers
have 2 concrete
counterweights (top
& front) to dampen
vibrations.
NOTE:
When removing
top panel, don’t damage
white plastic top panel
latches.
To remove top panel to access control module,
dispenser, inlet valves, pressure switch(es), drain
reservoir, surge protector & wiring, remove (2)
rear screws, then carefully slide panel toward rear
of washer (until panel stops) and lift panel up.
1st Edition/Revision 5 (1/20/04)