Download Zebra CPCL Specifications

Mobile Printing Systems
CPCL Programming Manual
wlan.encryption_key3
type: getvar; setvar
This parameter refers to the third indexed WEP encryption key. The WEP encryption key is a
hexadecimal string that is either 10 or 26 characters long depending on encryption method (40-bit or 128
bit). This key should match the wireless network WEP encryption key 3.
getvar result
This will return the encryption third encryption key.
Description
This command instructs the printer respond with the encryption
key value. (This example assumes that the printer is using 40-bit
encryption.)
Syntax
! U1 getvar “wlan.encryption_key3”
Result
“0000000000”
Example
setvar choices
10 hexadecimal characters for 40-bit encryption; 26 hexadecimal character for
128-bit encryption
Default
All zeros
Description
This command instructs the printer to set the encryption key
value. (This example assumes that the printer is using 40-bit
encryption.)
Syntax
! U1 setvar “wlan.encryption_key3” “A1B2C3D4F5”
Result
The third encryption key will be set to A1B2C3D4F5
Example
Section 14
Configuration/
Control
Commands
pg. 14-140
continued