Download Sharp DV-S1S(Y) Specifications
Transcript
35 36 37 38 39 40 VDD (3,3V/5V) VDD (3,3V/5V) NC VDD +12V / +18V VDD +12V / +18V VDD +12V / +18V Panel power supply (3,3V/5V) Panel power supply (3,3V/5V) No connection Panel power supply (+12V/18V) (selected by JA3, JA5 & JA6) Panel power supply (+12V/18V) (selected by JA3, JA5 & JA6) Panel power supply (+12V/18V) (selected by JA3, JA5 & JA6) LED1 – Status LED connector: 3-pin header PIN 1 2 3 DESCRIPTION Green LED pin (anode) LED pin common (cathode) Red LED pin (anode) P1 - Analog VGA in - 15 way connector PIN SYMBOL 1 PCR 2 PCG 3 PCB 4 ID2 5 DGND 6 AGND 7 AGND 8 AGND 9 DDC_5V 10 DGND 11 ID0 12 DDC_SDA 13 HS_IN 14 VS_IN 15 DDC_SCL P2 – DVI-I in PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 C1 C2 C3 C4 C5 C6 DESCRIPTION Red, analog Green, analog Blue analog Reserved for monitor ID bit 2 (grounded) Digital ground Analog ground red Analog ground green Analog ground blue +5V power supply for DDC (optional) Digital ground Reserved for monitor ID bit 0 (grounded) DDC serial data Horizontal sync or composite sync, input Vertical sync, input DDC serial clock SYMBOL /RX2 RX2 GND NC NC DDC_CLK DDC_DAT VS_IN /RX1 RX1 GND NC NC DDC_5V GND NC /RX0 RX0 GND NC NC GND RXC /RXC R G B HS_IN GND NC DESCRIPTION TMDS Data 2TMDS Data 2+ Digital Ground No connection No connection DDC Clock DDC Data Analog vertical Sync TMDS Data 1TMDS Data 1+ Digital Ground No connection No connection +5V power supply for DDC (optional) Ground (+5, Analog H/V Sync) No connection TMDS Data 0TMDS Data 0+ Digital Ground No connection No connection Digital Ground TMDS Clock+ TMDS ClockRed or Pr Green or Y Blue or Pb Analog horizontal sync Ground No connection PP2/PP3 – Alternate 12V/24VDC power supply PIN 1 2 DESCRIPTION +12VDC / 24VDC in Ground 21