Download Coustic AMP800S Technical data

3
such as light fittings installed directly in the ceiling,
should be avoided. Light fittings should be lowered so
that the inlet has free access to the room.
To get the full benefit of the Airmaster units,
the units must be located correctly according
to the physical geometry of the room.

4
1
2

Where people will be located in close physical proximity to a unit, it is important to use wall-mounted or
floor-mounted models using the mixing principle as
this avoids the occurrence of draughts.
Two smaller units can be appropriate
for a long, narrow room, where


the throw length is too short
longitudinally, yet too long laterally.


5
In a room with high
or sloping ceilings,
If the room has ceiling beams
the units should be
that may obstruct the airflow,
installed as high up
a floor-mounted unit that
as possible.
ventilates using the displa-

10
intelligent Ventilation
correct
placing
To achieve the most efficient supply conditions, objects,



cement principle (AMP 900)
or a wall-mounted unit that
ventilates along the room
should be chosen.
11