Download Coustic AMP800S Technical data

intelligent Ventilation
AmL & AMP
series
Both series consist of a range
of decentralised ventilation
units, which are particularly
suited to commercial buildings
and institutions.
Wall-mounted
Wall-mounted and partially integrated
Choosing the right unit
Horizontal model
Horizontal model
Horizontal model
The AML and AMP series are wall or floor
Intake and exhaust pass horizontally out of the unit
Horizontal model with 1/3rd of the unit
Horizontal model with 2/3rds of the unit
mounted ventilation units. Both come in two
and through an outer wall. A louvred grille is mounted
integrated into a ceiling.
integrated into a ceiling.
models: horizontal and vertical, which indica-
on the facade side.
tes how the intake and exhaust are placed.
Both models permit air supply through the
upper, middle or lower panels. Consequently,
1/3rd or 2/3rds of the unit can be integrated
above a ceiling.
Vertical model
Vertical model
Intake and exhaust pass vertically up through the roof.
Vertical model
Vertical model with 1/3rd of the unit
Vertical model with 2/3rd of the unit
Roof caps and covers are used to terminate the duct.
integrated into a ceiling.
integrated into a ceiling.
Floor-mounted
unit
This floor-mounted unit can be
placed against a wall and inlet at
ground level (displacement ) or at
ceiling level (mixed).
Floor-mounted units
can be placed along
Available as either a horizontal or
a wall, away from a
vertical model.
wall or freestanding,
e.g. as a room divider.
6
Horizontal model
Vertical model
Horizontal model
Vertical model
Intake and exhaust pass horizontally
Intake and exhaust pass vertically
Intake and exhaust pass
Intake and exhaust pass
through an outer wall.
up through the roof.
horizontally through an outer wall.
vertically through the roof.
7