Download DriSteem XT Specifications

Transcript

Operation
Components
Figure 47-1:
XT humidifier components
Vapor-logic4 display
Vapor-logic4 controls all humidiﬁer
functions and can connect to a
building automation system via
Modbus or optional BACnet MS/TP
or LonTalk. See the Vapor-logic4
Installation and Operation Manual
for more information.
Fill cup
Connects to inlet
at bottom of steam
cylinder via ﬁll hose
Steam outlet
Connection point for steam hose,
tubing, or pipe
Overﬂow
Prevents humidiﬁer
from overﬁlling
Steam cylinder
Message prompts user when time
to replace
High water sensor
Filling stops if water reaches sensor
Electrodes
Electrical current between electrodes
heats water into steam
Fill hose
Cylinder drain
Overﬂow to drain
Water ﬁll line connection
(under cabinet)
mc_091010_1416
OM-7641
DRI-STEEM XT Electrode Steam Humidifier Installation, Operation, and Maintenance Manual • Page 47

Related documents