Download WiMo GS-31 User manual

Figure 3-1 Control Panel of Ham Radio Deluxe (version 5.11).
From this control panel, frequency, mode, and the other parameters can be
adjusted by mouse or keyboard. The original interface is CT-17 which uses
FT232 chip to convert signal between radio and computer. Nowadays most
computers don’t have RS232C interface (named COM). For this GS, one USB
CI-V CAT Control Cable is used to replace the original one. This cable emulates
a Serial Port with USB which is the common connection. The port can be found
from Device Manager when plugging in the cable to USB socket of computer.
Then this port has to be selected in HRD Radio Control as the communication
port with the radio. The connection parameter is set as below:
14