Download AT&T Definity 6402D Specifications

Cordless and Wireless Telephones
■
Four COLUMN buttons — these buttons (labeled
) are used together
with the SELECT button to choose a line or programmable/intercom/drop
button.
■
Headset On/Off button — This button is used for turning the headset on
and off. Located on top of the handset, it is used when the headset jack is
in use. At all other times, the Headset On/Off button is deactivated to
prevent accidental call termination.
■
Handset (labeled ON/OFF) button — This On/Off button is used for turning
the handset on and off. (It can also be used to turn the headset on or off.)
LCD Display
The display provides information on the status of lines and range, battery power,
mute usage, etc.
Dial Pad
This is the standard 12-button pad for dialing telephone numbers and accessing
features.
Volume Control Switch
The Volume control (labeled “+” and “-”) adjusts the receiver volume (higher or
lower) when the handset is off-hook and adjusts the ring volume (higher or lower)
when the handset is on-hook.
Antenna
The antenna is used for receiving the transmissions from the radio module. This
antenna is flexible and is permanently attached to the handset.
Battery Charging Contacts
These contacts are used for charging the handset when contact is made with the
charging cradle.
Headset Connector
This jack is used for connecting the headset to the handset.
Battery Charger Features
Spare Battery Compartment
The Spare battery compartment refreshes the battery pack automatically by fully
discharging it before recharging it. This process reduces or eliminates the
potential “Memory” effect (which reduces a battery’s capacity when you
repeatedly recharge a battery before it is fully discharged).
18-28 Issue 11 December 1999