Download Ceragon FA4800 User manual

This object is accessible via SNMP Only
Description
Average carrier to interference noise ratio [-6..30]
SNMP Object ID
rfAverageCinr (1.3.6.1.4.1.31926.2.1.1.18)
SNMP Syntax
integer
Access
RO
5.14.2.15
Average RSSI
This object is accessible via SNMP Only
Description
Average received signal strength indication, measured in DB. [-100..-60]
SNMP Object ID
rfAverageRssi (1.3.6.1.4.1.31926.2.1.1.19)
SNMP Syntax
integer
Access
RO
5.14.2.16
RF Temperature
Description
The current temperature of the RF device.
CLI Attribute Name
rf-temperature
SNMP Object ID
rfTemperature (1.3.6.1.4.1.31926.2.1.1.26)
Value
Varies
Access
RO
Default
N/A
Dependencies
None
5.14.2.17
Transmit Asymmetry
Description
Percentage of the TX part in the airframe.
SNMP Object ID
TBD
CLI Attribute Name
tx-asymmetry
SNMP Syntax
integer
CLI Syntax
{25tx-75rx | 50tx-50rx | 75tx-25rx}
Access
RW
Default Value
50tx-50rx
5.14.2.18
Lowest Modulation
Dropping below the Lowest Mode causes RF link failure.
Page 155
4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299